Putting grips on
#1
Noobhead
Thread Starter
Join Date: Jul 2006
Location: SoCal
Posts: 688
Bikes: k2 Zed 4.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Putting grips on
Changing the grips troubled me for hours and I'm very frustrated. Is there any tips on putting the grips on/off? I'm trying to change my grips and I ended up cutting the grips off because it literatly glued onto my handlebar. I've tried twisting it, pulling it, pushing it, and it still wont budge going in further after it got in a little more than half way.
Mucho gracias
Mucho gracias
#3
Noobhead
Thread Starter
Join Date: Jul 2006
Location: SoCal
Posts: 688
Bikes: k2 Zed 4.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Roxter
Spray the inside with hairspray.
#4
Throw the stick!!!!
Compressed air works best. If you don't have that available then alchohol works great since it will go away on it's own. Hairspray works pretty well also. Just spray it on the inside of the grip then slide it on.
__________________
I may be fat but I'm slow enough to make up for it.
#5
Noobhead
Thread Starter
Join Date: Jul 2006
Location: SoCal
Posts: 688
Bikes: k2 Zed 4.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Awesome! Thanks for the super duper fast replies. Just one question about the compressed air. How does that work? Oh.. and... what is the best way to take the grips off other than cutting it open like I did out of frustration =P
I love this forum! GROUP HUG!!
I love this forum! GROUP HUG!!
#6
...is my hero!
Join Date: Aug 2005
Location: Edmonton, Alberta
Posts: 864
Bikes: 2008 Kink Whip, 2006 Specialized Enduro, 2006 Norco Wolverine, 2006 Iron Horse FsZ
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
To get them off...put a small hole on the end and pump air into it and one side will pop off (I think thats what LowCel was getting at). What I do to get them on is just breath on the bars a bit till you see a bit on condensation then they slide on pretty easily and dry pretty quickly.
#8
Noobhead
Thread Starter
Join Date: Jul 2006
Location: SoCal
Posts: 688
Bikes: k2 Zed 4.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by John Galt
I've found that a 2mm hew wrecnh is the best way of putting them on/off:
https://www.odigrips.com/
I haven't used my compressor for grips applications for years...
https://www.odigrips.com/
I haven't used my compressor for grips applications for years...
Yea, the lock-ons are easy, but I find the Race Face to be very comfortable
https://www.jensonusa.com/store/produ...vil+Grips.aspx
#9
cyclepath
Join Date: Sep 2005
Location: "The Last Best Place"
Posts: 3,550
Bikes: 2005 Trek Pilot 5.0, 2001 Specialized Sirrus Pro, Kona Lava Dome, Raleigh hardtail converted to commuter, 87 Takara steel road bike, 2008 Trek Soho
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Soapy water works too.
__________________
--------------------------------------------------------------------------------------------
"Without music, life would be a mistake."
-- Friedrich Nietzsche
--------------------------------------------------------------------------------------------
"Without music, life would be a mistake."
-- Friedrich Nietzsche
#11
Senior Member
Join Date: Nov 2004
Location: Between the mountains and the lake.
Posts: 16,681
Bikes: 8 bikes - one for each day of the week!
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
And for those that don't keep a coompressor in their back pocket, hairspray is still a gerat choice. I scored 14 pairs of lock-ons below dealer cost, so I haven't had to deal with this issue for while.
#12
Wood Licker
Join Date: Apr 2002
Location: Whistler,BC
Posts: 16,966
Bikes: Trek Fuel EX 8 27.5 +, 2002 Transition Dirtbag, Kona Roast 2002
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Originally Posted by John Galt
I've found that a 2mm hew wrecnh is the best way of putting them on/off:
https://www.odigrips.com/
I haven't used my compressor for grips applications for years...
https://www.odigrips.com/
I haven't used my compressor for grips applications for years...
#13
Senior Member
Join Date: Aug 2006
Posts: 998
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Which odis do you like the best? I don't know which would feel the best on the hands after a long ride on the mtb...
In any case, next replacement of grips I do will be their Lock-Ons.
In any case, next replacement of grips I do will be their Lock-Ons.
#14
Fourth Degree Legend
Join Date: Jun 2005
Location: American Gardens Building
Posts: 3,826
Bikes: 2005 Kona Cinder Cone & 2010 Cannondale SuperSix
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Maelstrom
Agreed...odi's are amongst the best things to hit bikes since ... rubber
#15
Throw the stick!!!!
Originally Posted by daredevil
Soapy water works too.
__________________
I may be fat but I'm slow enough to make up for it.
#16
Senior Member
Join Date: Mar 2000
Location: Parrish, FL
Posts: 7,963
Bikes: Lots
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I agree with the ODI's I love them!
If you're still taking grips off with hair spray, the best way to do it is to put a thin bladed screw driver between the grip and the handlebar. Lay the bike over, and lift the screwdriver, spray in between the grip and the bar.
Then slide the screwdriver out!
Take a towel and wrap around the grip and twist it like a throttle. The liquid hair spray will break the grip free. Then slide it off!
Inserting them is even easier. Spray inside of grip, slide them on, leave them to dry overnight!
By the way, the cheapest hair spray works best! Aqua Net is my recommendation. Go to Target or Wal-Mart and find the travel section by the Pharmacy. A small can will last for years.
If you're still taking grips off with hair spray, the best way to do it is to put a thin bladed screw driver between the grip and the handlebar. Lay the bike over, and lift the screwdriver, spray in between the grip and the bar.
Then slide the screwdriver out!
Take a towel and wrap around the grip and twist it like a throttle. The liquid hair spray will break the grip free. Then slide it off!
Inserting them is even easier. Spray inside of grip, slide them on, leave them to dry overnight!
By the way, the cheapest hair spray works best! Aqua Net is my recommendation. Go to Target or Wal-Mart and find the travel section by the Pharmacy. A small can will last for years.
__________________
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
#17
Throw the stick!!!!
Just a quick note on the screwdriver method. Be very careful doing this if using carbon bars. It can still be done, just use a little extra caution.
__________________
I may be fat but I'm slow enough to make up for it.
#18
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,355
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6214 Post(s)
Liked 4,212 Times
in
2,361 Posts
Originally Posted by jiiiim
Awesome! Thanks for the super duper fast replies. Just one question about the compressed air. How does that work? Oh.. and... what is the best way to take the grips off other than cutting it open like I did out of frustration =P
I love this forum! GROUP HUG!!
I love this forum! GROUP HUG!!
The air method works byBernoulli's Principle.
Take them off by injecting water under the grip and working it around. They will loosen right up.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#19
Senior Member
Join Date: Aug 2003
Location: colonial heights Va
Posts: 1,200
Bikes: Devinci Guzzler, 04 Canadian version
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by John Galt
I've found that a 2mm hew wrecnh is the best way of putting them on/off:
https://www.odigrips.com/
I haven't used my compressor for grips applications for years...
https://www.odigrips.com/
I haven't used my compressor for grips applications for years...
https://www.performancebike.com/shop/...tegory_ID=5251 because they are more comfortable on long rides
if lock ons are not an option and you dont a way to get to Target a couple drops of spit works well too.
small screwdriver as far as you can and a drop of spit between the driver and bar along with a twist of the grip after removing the driver will get the old one off and the new one will slide right on and you dont have to wait all night for the water to dry
#20
cyclepath
Join Date: Sep 2005
Location: "The Last Best Place"
Posts: 3,550
Bikes: 2005 Trek Pilot 5.0, 2001 Specialized Sirrus Pro, Kona Lava Dome, Raleigh hardtail converted to commuter, 87 Takara steel road bike, 2008 Trek Soho
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by LowCel
In my opinion soap is the absolute worst thing you can use to put grips on. When you use soap they will usually slip anytime it rains or you get moisture in or around the grip area. That is just the experience I have had with soap and what I have heard from everyone else that has used soap.
Didn't have an air compressor or hairspray around. Used some soapy water and they haven't come close to budging since including during plenty of wet commutes. I didn't use a whole lot of soap. Maybe that's the difference.
__________________
--------------------------------------------------------------------------------------------
"Without music, life would be a mistake."
-- Friedrich Nietzsche
--------------------------------------------------------------------------------------------
"Without music, life would be a mistake."
-- Friedrich Nietzsche
#21
Banned.
Join Date: Aug 2006
Posts: 75
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by iamthetas
agreed but I use these
https://www.performancebike.com/shop/...tegory_ID=5251 because they are more comfortable on long rides
https://www.performancebike.com/shop/...tegory_ID=5251 because they are more comfortable on long rides
#22
UareFASTjustNOTfastENOUGH
Join Date: Jul 2005
Location: Amongst the hills in So.Cal.
Posts: 391
Bikes: Scott Gambler, Scott Ransom, Bianchi C2C 928
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
As mentioned,
On - hair spray, water, wd40 (just kidding about that last one )
and if you do not have acces to any of the above, just spit on the bars. Yes it does work.
Off - Lay the bike on its side, lift up one edge of the grip and spray some window cleaner or any soapy spray between the grips and the bar. If you do not have any cleaning spray, again, just use a bit of spit. If your grips have open ends on both sides then spray inside both ends. Then slowly rotate the grips while pulling them off, this may take a few minutes but it works.
Now you can use window cleaner to get the grips on as well but be very sure it dries compleatly before riding
MSF
On - hair spray, water, wd40 (just kidding about that last one )
and if you do not have acces to any of the above, just spit on the bars. Yes it does work.
Off - Lay the bike on its side, lift up one edge of the grip and spray some window cleaner or any soapy spray between the grips and the bar. If you do not have any cleaning spray, again, just use a bit of spit. If your grips have open ends on both sides then spray inside both ends. Then slowly rotate the grips while pulling them off, this may take a few minutes but it works.
Now you can use window cleaner to get the grips on as well but be very sure it dries compleatly before riding
MSF
__________________
#23
Senior Member
Join Date: Aug 2003
Location: colonial heights Va
Posts: 1,200
Bikes: Devinci Guzzler, 04 Canadian version
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by John Galt
What happens if you don't use those Flying Nun grips on a long ride.
#24
Banned.
Join Date: Aug 2006
Posts: 75
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by iamthetas
dont knock 'em 'till you try 'em. you'd be amazed at the increase in climbing efficiency from catching a good tail wind.
What happens if you don't use those grips on a long ride?