Go Back  Bike Forums > Bike Forums > Mountain Biking
Reload this Page >

Slight issue with new MTB purchase

Search
Notices
Mountain Biking Mountain biking is one of the fastest growing sports in the world. Check out this forum to discuss the latest tips, tricks, gear and equipment in the world of mountain biking.

Slight issue with new MTB purchase

Thread Tools
 
Search this Thread
 
Old 12-10-07, 09:30 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Nov 2007
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Slight issue with new MTB purchase

I'll try to make this as thorough and to the point as possible.

I just brought home my '07 Kona Caldera. Before I purchased it a few weeks ago, I rode it just briefly, and compared the size to my old bike. When I got it home, I compared the 2 bikes, and noticed that the Kona sits up quite a bit higher in the front (due to the suspension, I suppose)...not a big deal. It still feels comfortable and I'm loving it.

But here's my dilemma. I'm about 5'10" or so, and realized that my standing clearance isn't as much as I'd like (however, I tested it without shoes when I got home). The bike has a 20" frame, and they have an 18" Caldera still at the shop. I'm sure they wouldn't mind if I switched bikes to get the 18", but initially the 20" felt much better than the 18".

Anyone have any insight on what may be the best option? If I went back for the 18", I would be afraid that it may feel too small, and would at least need a new stem (which might help the feeling of 'too small'). However, if I stay with the 20", I'm afraid it may be a hair too large...and they didn't have a 19". It might be a different story once the bike is off of carpet (haven't ridden it since I got it home).

I know that I need a bike that I feel comfortable on, and I'm sure some folks will say "You should have tested it more before buying it"...but like I said it felt great when I was testing it in the store...I'm just noticing a bit more now that it's home. It could also be one of those things that I just need to get more comfortable with it, as I haven't had a chance to really try it out.

Any thoughts or ideas would be appreciated!
dlh1999 is offline  
Old 12-10-07, 10:03 PM
  #2  
Senior Member
 
Old School's Avatar
 
Join Date: Jan 2006
Location: Camino, CA
Posts: 1,181

Bikes: Trek 5500 OCLV, Trek Fuel EX 9

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I am 5'9" and ride an 18" Trek frame. I like the standover height and think a 20" frame would be way to tight for me.
Old School is offline  
Old 12-10-07, 10:06 PM
  #3  
RT
The Weird Beard
 
RT's Avatar
 
Join Date: May 2005
Location: COS
Posts: 8,554
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
I am 6'1" and had some similar issues with my Raleigh M50 DX. For some reason, even-inch frames put me in the grey area. My Giant is a 21" and fits perfectly, but the Raleighs were 20" and 22". I went with the smaller, and it has worked out fine. I think I can adapt things like seatpost and handlebars better.
RT is offline  
Old 12-10-07, 10:21 PM
  #4  
use your best eye
 
kenhill3's Avatar
 
Join Date: Mar 2006
Location: Olympia, Washington
Posts: 3,050

Bikes: '75 Bertin, '93 Parkpre Team 925, '04 Kona King Kikapu, '05 Bianchi Vigorelli

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
I am 5'10" with a 30" inseam and I ride 17" and 18" MTB's. A 20" would be way too big. What's your inseam?

Yes, you'll be able to adjust your ergonomics on the bike with stem, bars, seat position, seatpost type, etc.. My spin on the whole 'fit' thing is that it is a lot easier to fit (with component adjustments) on a slightly small frame than it is on one slightly large. I say go with the 18".

Toddorado said it well, on the smaller you can adapt easier.
__________________
"I tell you, We are here on earth to fart around, and don't let anybody tell you any different." - Kurt Vonnegut jr.
kenhill3 is offline  
Old 12-10-07, 10:27 PM
  #5  
Te mortuo heres tibi sim?
 
scrublover's Avatar
 
Join Date: Aug 2004
Location: East coast
Posts: 3,486

Bikes: hardtail, squishy, fixed roadie, fixed crosser

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Buy the bike by the toptube fit, not the seattube fit. If you feel you can get the right fit (as in, not too cramped length-wise without resorting to silly long stems) with the smaller frame size, go for it.
scrublover is offline  
Old 12-10-07, 11:00 PM
  #6  
Junior Member
Thread Starter
 
Join Date: Nov 2007
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Thanks for all the feedback...my inseam is about 33" and figured I'd be safe with the 20" frame. Now I'm worried that they might not have the 18" afterall, which is a bummer because I'm kinda set on the Calderas...but I've decided to head back in the morning and see what they have...

Thanks again!

Last edited by dlh1999; 12-10-07 at 11:06 PM.
dlh1999 is offline  
Old 12-11-07, 12:43 PM
  #7  
Junior Member
Thread Starter
 
Join Date: Nov 2007
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Well, I just got back from the bike shop, and they still had the 18" Caldera. So I had them put a Ritchey stem on it that was slightly longer, and the bike fits perfectly. Thanks again for all the help!
dlh1999 is offline  
Old 12-11-07, 09:01 PM
  #8  
unofficial roadie
 
DirtPedalerB's Avatar
 
Join Date: Jul 2006
Location: Out in the woods you see
Posts: 1,440

Bikes: 2004 Marin bobcat trail, 2006 trek fuel ex7, 2007 iron horse road bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
i'm ~ 5'10 and ride a 17 inch Marin and a 19.5 inch Trek ... oddly enough both seat tubes measure 18.5 inches center to top.. just saying some campanies size their bikes differently..

either size would probably work. the 18 might be a better fit or maybe try a different model.
DirtPedalerB is offline  
Old 12-12-07, 05:53 AM
  #9  
Junior Member
Thread Starter
 
Join Date: Nov 2007
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
The 18" is a PERFECT fit...put a slightly longer stem on it, and couldn't ask for a better fit. It is funny that it's almost identical to the Raleigh I have...
dlh1999 is offline  
Old 12-12-07, 10:38 AM
  #10  
use your best eye
 
kenhill3's Avatar
 
Join Date: Mar 2006
Location: Olympia, Washington
Posts: 3,050

Bikes: '75 Bertin, '93 Parkpre Team 925, '04 Kona King Kikapu, '05 Bianchi Vigorelli

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by dlh1999
The 18" is a PERFECT fit...put a slightly longer stem on it, and couldn't ask for a better fit. It is funny that it's almost identical to the Raleigh I have...
That's great, sounds like you're pretty juiced about it.

When my bike fits well and I am on a good ride/flow, I see God.
__________________
"I tell you, We are here on earth to fart around, and don't let anybody tell you any different." - Kurt Vonnegut jr.
kenhill3 is offline  
Old 12-12-07, 11:44 AM
  #11  
Fourth Degree Legend
 
junkyard's Avatar
 
Join Date: Jun 2005
Location: American Gardens Building
Posts: 3,826

Bikes: 2005 Kona Cinder Cone & 2010 Cannondale SuperSix

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I'm 5'2" and ride a 22" bike. I think 18" is way too small.
junkyard is offline  
Old 12-12-07, 01:54 PM
  #12  
cs1
Senior Member
 
cs1's Avatar
 
Join Date: Feb 2004
Location: Clev Oh
Posts: 7,091

Bikes: Specialized, Schwinn

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 24 Times in 22 Posts
Originally Posted by junkyard
I'm 5'2" and ride a 22" bike. I think 18" is way too small.
NO WAY! How do even stradle the bike?

Tim
cs1 is offline  
Old 12-12-07, 03:41 PM
  #13  
Junior Member
Thread Starter
 
Join Date: Nov 2007
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by junkyard
I'm 5'2" and ride a 22" bike. I think 18" is way too small.
That's a joke, right?
dlh1999 is offline  
Old 12-12-07, 03:48 PM
  #14  
Moar cowbell
 
dminor's Avatar
 
Join Date: Oct 2004
Location: The 509
Posts: 12,481

Bikes: Bike list is not a resume. Nobody cares.

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 6 Times in 5 Posts
Originally Posted by dlh1999
That's a joke, right?
The only thing junkyard does not joke about is the serious stuff.
__________________
Originally Posted by Mark Twain
"Don't argue with stupid people; they will drag you down to their level and then beat you with experience."
dminor is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.