Suspension Fork Upgrade for 1" Steerer
#1
Newbie
Thread Starter
Join Date: Oct 2003
Location: Tallahassee, FL
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Suspension Fork Upgrade for 1" Steerer
Hello all!
I have a Specialized Rockhopper (circa '96/97) with a rigid fork that I would like to upgrade to front suspension. I have not ridden this bike seriously in almost 4 years, and want to give it an overhaul that includes new brakes, headset, and hopefully the fork. I believe this bike has a 1" threaded, and I'm looking for some options in a 1" threadless.
I have done some research, so I know all about how this will change my geometry, cost me a certain amount of money, etc. What I'm looking for is some suggestions for a decent fork (primarily light XC, no big drops, no big hills as I'm in North Florida) that will fit my bike... and please, no "go buy a new bike" is not an option. This bike is in cherry condition with decent components, so I'm not going to scrap it just for a new fork since I'm already planning on upgrading brakes and headset, anyway.
Also, I think this bike may be "front suspension ready" or something, maybe not. Either way, how much will it really raise my front, and will the potential benefits of front suspension outweigh any negatives in geometry or steering? I'll sit quietly and wait for any suggestions on makes/models... THANKS !!!
Drew
I have a Specialized Rockhopper (circa '96/97) with a rigid fork that I would like to upgrade to front suspension. I have not ridden this bike seriously in almost 4 years, and want to give it an overhaul that includes new brakes, headset, and hopefully the fork. I believe this bike has a 1" threaded, and I'm looking for some options in a 1" threadless.
I have done some research, so I know all about how this will change my geometry, cost me a certain amount of money, etc. What I'm looking for is some suggestions for a decent fork (primarily light XC, no big drops, no big hills as I'm in North Florida) that will fit my bike... and please, no "go buy a new bike" is not an option. This bike is in cherry condition with decent components, so I'm not going to scrap it just for a new fork since I'm already planning on upgrading brakes and headset, anyway.
Also, I think this bike may be "front suspension ready" or something, maybe not. Either way, how much will it really raise my front, and will the potential benefits of front suspension outweigh any negatives in geometry or steering? I'll sit quietly and wait for any suggestions on makes/models... THANKS !!!
Drew
#2
Still kicking.
Best of luck maybee check ebay.
__________________
Appreciate the old bikes more than the new.
Appreciate the old bikes more than the new.
#3
Newbie
Join Date: Oct 2003
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
1" Steerer
RST makes a good fork that you can buy a 1" threaded steerer for. They make forks in all price ranges depending on how much you want to spend.
#4
Senior Member
Join Date: Nov 2001
Posts: 1,652
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
YOur choices are EXTREMELY limited due to the 1" and current standard being 1 1/8". Just so you realize what you are getting into, new headset obviously, you said new brakes, so that means new levers. I'm betting that your old one had cantilever brakes and new style is V-brakes whcih require more pull.
So you are easily gonig to have a few hundred invested in this bike to just get it below low end new one. Why not just ride it as is, and save your money for a new bike? No reason not to keep it around as a good bike. I know this is not what you want to here.
So you are easily gonig to have a few hundred invested in this bike to just get it below low end new one. Why not just ride it as is, and save your money for a new bike? No reason not to keep it around as a good bike. I know this is not what you want to here.
#6
Senior Member
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,632
Bikes: Too many bikes, too little time to ride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 417 Post(s)
Liked 431 Times
in
297 Posts
old school rock shox mags can be found in various classifieds as well as on ebay. marzocchi also makes 1" forks i believe.
#7
Senior Member
Join Date: Sep 2003
Location: Los Angeles
Posts: 145
Bikes: Old Hard Rock, New Cannondale R400
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sorry, I don't have any specific fork recommendations, but I am only eching what some others have said. Before you get carried away, do the math. The bike may be in great shape, but doing the upgrades is gonna cost a bit of money.
Plug everything into a spreadsheet and you will probably start seeing the costs rise. And don't fool yourself, once you have started upgrading, you will probably not stop the headset and brakes. Once you add it all up, you may find that you can get exactly what you want by buying a new bike. It will also save you the downtime while the bike is pieces. And don't forget that if you have to buy any tools, you should add that expense as well.
That said, if you want to do the work yourself because you enjoy taking your ride apart for fun (like I do), then knock yourself out. With the exception of getting the headset cups pressed into the frame you should have no problems doing the work yourself assuming you have the appropriate tools.
Of course, if you bought a new bike, you would have two nice rides instead of one.
- Jeff
Plug everything into a spreadsheet and you will probably start seeing the costs rise. And don't fool yourself, once you have started upgrading, you will probably not stop the headset and brakes. Once you add it all up, you may find that you can get exactly what you want by buying a new bike. It will also save you the downtime while the bike is pieces. And don't forget that if you have to buy any tools, you should add that expense as well.
That said, if you want to do the work yourself because you enjoy taking your ride apart for fun (like I do), then knock yourself out. With the exception of getting the headset cups pressed into the frame you should have no problems doing the work yourself assuming you have the appropriate tools.
Of course, if you bought a new bike, you would have two nice rides instead of one.
- Jeff
#8
Senior Member
Join Date: Mar 2000
Location: Parrish, FL
Posts: 7,963
Bikes: Lots
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hey where do you ride up there? Whenever we go, we hit Tom Brown Park and the Red Bug Trail. We used to ride the Fern Trail, but I understand that the area is now a development.
I'll have to PM you next time I'm coming to Tally!
L8R
Oh yeah! Go Gators!
I had to throw that in, I'm a UF alumni, but my wife is a FSU alumni, so things are aways "interesting" around our house Thanksgiving weekend.
I'll have to PM you next time I'm coming to Tally!
L8R
Oh yeah! Go Gators!
I had to throw that in, I'm a UF alumni, but my wife is a FSU alumni, so things are aways "interesting" around our house Thanksgiving weekend.
__________________
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
#9
bontrager4lyfe!!!1
Join Date: Oct 2003
Location: South Bay/Santa Cruz, Ca
Posts: 10
Bikes: Bontrager Race Light, and a Bontrager Privateer
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
There are several 1" forks on eBay, I've also heard that marzocchi also makes 1" too, but I think eBay is you best bet. Chris King makes a headset modifyer to take a 1 1/8" headset down to a 1" for when you wanta upgrade that.