ColoradoB5

There are a plethora of expensive 26" XC wheels out there to choose from. I'd like to get some advice from those that have forked over some cash for new wheels to upgrade from stock to see what their thoughts are.

Review what you have here so we can get a good list going for those that want to upgrade.

My 2006 Trek Fuel Ex8 came with great Bontrager tubeless compatible wheels. I'm looking to turn those into road-ish/slicks and get a new lighter, stronger set for trails.

I'd like to see why my options are for improving on these from budget greatness to over-the-top wheelsets.

I never shopped for a wheelset like this so edumacate me

Dub

DickyJ

Budget?

scelia

Industry Nine Enduro wheels: https://www.industrynine.net/official/enduro.html

DickyJ

Oh, didn't notice you said expensive

Yeah, I9's ftw

mtnbiker66

Just buy some I9s and be a happy camper.

ca7erham

Wow, those are about 300$ more expensive than my current bike. I dont think I'v even invested $900 in my MTB and road bike combined.

sscyco

I have owned serveral high end wheelsets over the years - my favorite is a good set of hubs hand built to a good set of hoops. Like - king hubs, DT revolution spokes, brass nipples, Mavic rims - beats a pre built set any day (as long as you have a good wheel builder). Also - I always get extra spokes and nipples when they are built - just in case.

M_S

King with whatever.

Dannihilator

Hope hubs with mavic xm 819 disc's.

rbrsddn

Werd. Can't go wrong with CK's or I9's

jerseybmx

those flanges are scary looking... ewwww


i guess i'm a little old school when it comes to wheels.

i'm actually running 08 racexlite tubless non disc wheels... like em

but u have the exact opposite bike of me.

u have suspension and disc brakes... i have full rigid and v-brakes!!! soon to be cantis!!!

pinkrobe

True dat. What about the I9 All Mountain wheels? They're 1/2 lb lighter...

Dannihilator

I9's have been mentioned several times already and decided to be different.

pinkrobe

Sorry, I should have clarified. I concur with your suggestion of the Mavic/Hope combo. A couple of other people had mentioned the I9 Enduro. However, the I9 All Mountain is ~200g lighter than the Enduro, and is pretty well-suited to XC/AM riding. It was sort of a general question to the group at large.

brewer90

Call Dave at Speed Dream and get a set of handbuilts with King hubs and ZTR355 rims.

https://www.speeddream.com/mountain_disc.php

mic2377

I have a set of wheels as such:
DT 4.2 rims, 28/32 hole
XTR-965 hubs (centerlock)
Wheelsmith 2.0/1.7 spokes
Alloy nipples

Total cost was ~$525 including a new set of XTR-965 brakes. These wheels are LIGHT (~1500-ish grams), and are plenty durable for me. Best money I spent on the bike. If you are careful scrounger you can build some for cheap too.

They dropped 2 lbs from the bike in the just the wheels! You can feel this! However, just make sure to lace disc wheels 3x ALWAYS. Nasty things happen otherwise.

kenhill3

I'm kinda old school about this. I prefer wheels with conventional spokes/hubs. No bladed, no straight pull, no black spokes, etc.. This all just makes it simpler/easier to replace a spoke or re-lace a hub. Of course this is all predicated by the fact that I build/work on my own wheels.

One exception is that I have a set of XTR Centerlock/Mavic 717/DT 15ga. wheels. Not particularly light- I think about 1800 grams. But for $300 I just went ahead and bought them at the time. Strong wheels for sure. I tensioned/trued them up a bit out of the box.

cryptid01

You're not old school, just unenlightened. I9 spokes can be replaced without removing rotors, cassettes, or even removing the wheel from the bike.

kenhill3

My budget is a lot happier with 'old school'.

cryptid01

That's understandable - imposition of personal budget constraints (even when the OP specifically inquired about "over the top wheelsets") is the bikeforums way. But you could just say that rather than try and manufacture reasons, particularly when you have no direct experience with the product you're denigrating.

kenhill3

I denigrated nothing, I gave my own opinion and experience.

The OP, as I read it, asked for opinions on wheel upgrades, not specifically "over the top wheelsets":


"I'd like to see why my options are for improving on these from budget greatness to over-the-top wheelsets."

.

wheelhot

Take a look at Stans wheelset.

mic2377

i personally just don't see what is so great about the I9 wheels. Of course, I haven't ridden them. But, they are 1400 grams and $900. Just not the best deal if you can handle building your own lightweight wheels (which most amateur wheel builders can't).

i am also distrustful of Al spokes screwed into an Al hub. how wouldn't these things seize once exposed to nasty elements?

and, about convenience, how long does it take to remove a cassette and a centerlock rotor? 5 minutes, maybe.

for whatever its worth, they look cool though. i'll let other people pay for them until they get cheap enough for me to tinker with.

ca7erham

How do you remove the cassette and centerlock rotor on the trail? Cant imagine it would be much fun to carry a wrench and cassette tool in your camel back.

wheelhot

Erm, most likely, I9 wont be dropping their prices cause they a group of loyal devotees and every rider that I know who owns I9, loves it. Not much negative comment so that's why their price will stay the same.