Ritchey WCS bars, stem, and seatpost
#1
Junior Member
Thread Starter
Join Date: Mar 2004
Location: WI
Posts: 7
Bikes: s&m, specialized, federal
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ritchey WCS bars, stem, and seatpost
Hey, I'm going to be getting a Redline MonoCog. Has anybody heard anything about the wcs mountain groupo from Ritchey? If so, I would like to hear your opinions.
Joe[SIZE=1]
Joe[SIZE=1]
#2
Kona_roastbika is YOUNG
Join Date: Mar 2004
Posts: 239
Bikes: kona roast with 2004 dirt jumpers ll
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The Redline Mono Cog Singlespeed Mountainbike $429.95 Complete!
Note, Redline does not permit Internet sales,
so you'll have to visit us in West Newton, Massachusetts to buy one of these.
Click for Larger Image (2001 model shown. 2002 is similar, but comes in black only.)
Why should a singlespeed be expensive?
Singlespeeds don't have all that gear junk, multiple chainwheels, derailers, shifters, cassettes and so forth, why should they be expensive? The Redline Mono Cog isn't! Sure, the 100% double-butted cromoly frame isn't as light as unobtanium, but at $449.95, the whole bike costs less than many high-end singlespeed frames.
Did you have (or lust for) a Redline BMX bike when you were a kid? Why grow up!
This is a bike for pure fun, built to take rough use. The TIG welded frame is both strong and light, with an extra reinforcement gusset at the critical head-tube/down-tube joint.
I THINK IT IS A WAISTE OF MONEY!
Note, Redline does not permit Internet sales,
so you'll have to visit us in West Newton, Massachusetts to buy one of these.
Click for Larger Image (2001 model shown. 2002 is similar, but comes in black only.)
Why should a singlespeed be expensive?
Singlespeeds don't have all that gear junk, multiple chainwheels, derailers, shifters, cassettes and so forth, why should they be expensive? The Redline Mono Cog isn't! Sure, the 100% double-butted cromoly frame isn't as light as unobtanium, but at $449.95, the whole bike costs less than many high-end singlespeed frames.
Did you have (or lust for) a Redline BMX bike when you were a kid? Why grow up!
This is a bike for pure fun, built to take rough use. The TIG welded frame is both strong and light, with an extra reinforcement gusset at the critical head-tube/down-tube joint.
I THINK IT IS A WAISTE OF MONEY!
#3
Keepin' it real since '84
Join Date: Jan 2004
Location: Oklahoma
Posts: 348
Bikes: Jamis Komodo
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by kona_roastbika
The Redline Mono Cog Singlespeed
Note, Redline does not permit Internet sales,
so you'll have to visit us in West Newton, Massachusetts to buy one of these.
Note, Redline does not permit Internet sales,
so you'll have to visit us in West Newton, Massachusetts to buy one of these.
#4
NOT a weight weenie
Join Date: Dec 2000
Posts: 1,762
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The WCS line from Ritchey is a hifh end grupppo. Light, functions very well, and has a bunch intelligence behind the material selection and manufacturing. Ritchey is not reaaly known to produce crap. After all he is one of the "founding father's" of MTB'ng.
#5
Senior Member
Join Date: Mar 2000
Location: Parrish, FL
Posts: 7,963
Bikes: Lots
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ritchey makes great stuff, it's more lightweight XC focused, so I don't own any for my style of riding, but it's nice stuff.
As far as the Monocog. My good friend rides one and it's a great bike. It's relatively light for a steel frame and handles well, well balanced and strong. It's simplistic design and budget make this a great SS bike.
The ONLY issue, and it's not a big issue. Is that the rear end spacing is 110mm, not the standard 135mm. So, you MUST use a BMX type rear hub. Not a biggie, but if you upgrade your wheels keep that in mind.
The other thing to consider upgrading when the time comes are the cranks. The MonoCog comes stock with 175mm cranks. Most SS guys I know run longer cranks for better leverage on the climbs. Consider running 180 length.
L8R
As far as the Monocog. My good friend rides one and it's a great bike. It's relatively light for a steel frame and handles well, well balanced and strong. It's simplistic design and budget make this a great SS bike.
The ONLY issue, and it's not a big issue. Is that the rear end spacing is 110mm, not the standard 135mm. So, you MUST use a BMX type rear hub. Not a biggie, but if you upgrade your wheels keep that in mind.
The other thing to consider upgrading when the time comes are the cranks. The MonoCog comes stock with 175mm cranks. Most SS guys I know run longer cranks for better leverage on the climbs. Consider running 180 length.
L8R
__________________
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
#6
I couldn't car less.
Join Date: Nov 2003
Posts: 4,397
Bikes: Ritchey P-series prototype, Diamondback, Nishiki Triathelon Pro.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
wcs is Ritchey's top level parts line,
they also have severe condition line.
https://www.ritcheylogic.com/
Sorry..yes they are very good components, I doubt anybody claims better, though you certainly can find cheaper.
And cheaper means not as reliable.
If I was building up a new mtb frame I would be using Ritchey components where poss.
they also have severe condition line.
https://www.ritcheylogic.com/
Sorry..yes they are very good components, I doubt anybody claims better, though you certainly can find cheaper.
And cheaper means not as reliable.
If I was building up a new mtb frame I would be using Ritchey components where poss.
Last edited by jeff williams; 03-11-04 at 03:17 PM.
#7
Footballus vita est
Join Date: Jun 2002
Location: Portland, OR
Posts: 2,118
Bikes: Trek 4500, Kona Dawg
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by kona_roastbika
The Redline Mono Cog Singlespeed Mountainbike...
...I THINK IT IS A WAISTE OF MONEY!
...I THINK IT IS A WAISTE OF MONEY!
I say go with the steel frame on this one...it just feels right.
__________________
"The internet is a place where absolutely nothing happens. You need to take advantage of that." ~ Strong Bad
"The internet is a place where absolutely nothing happens. You need to take advantage of that." ~ Strong Bad
#8
Junior Member
Thread Starter
Join Date: Mar 2004
Location: WI
Posts: 7
Bikes: s&m, specialized, federal
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What about a Thompson post and a Thompson stem? What do you goes think about that? Would that be a better/comparable/worse set up?
Let me know what you think
Joe
Let me know what you think
Joe
#9
Senior Member
Join Date: Mar 2000
Location: Parrish, FL
Posts: 7,963
Bikes: Lots
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Big fan of Thomson (notice lack of the letter "p" in the correct spelling)!
I own several seatposts and stems. I have a post on each of my bikes and have two stems.
You really can't get much better than a Thomson Elite Seatpost. Lightweight, great clamp, good looking too!
As far as their stems. They work, and you don't have the bolts sticking out the back where you could scrap your knee against them and cut yourself.
My only complaint, and it's a minor one is the bolts are 4mm heads. Would prefer a bigger bolt with a 5mm head.
L8R
I own several seatposts and stems. I have a post on each of my bikes and have two stems.
You really can't get much better than a Thomson Elite Seatpost. Lightweight, great clamp, good looking too!
As far as their stems. They work, and you don't have the bolts sticking out the back where you could scrap your knee against them and cut yourself.
My only complaint, and it's a minor one is the bolts are 4mm heads. Would prefer a bigger bolt with a 5mm head.
L8R
__________________
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger