2009 Trek 4500 Upgrade Advice
#1
Newbie
Thread Starter
Join Date: Jul 2009
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
2009 Trek 4500 Upgrade Advice
Hello!
I recently purchased a 2009 Trek 4500. After a few weeks of riding, I have decided that I would like to upgrade the seat, and possibly switch out the v-breaks for disc breaks.
I'm looking to spend about one hundred to one hundred and fifty dollars on each, so that would be a total of two to three hundred for both the new seat and disc breaks. Apart from that, my only condition is that the seat must retain the same style and profile as the stock seat.
Any recommendations?
Thanks guys, I appreciate your help a lot.
I recently purchased a 2009 Trek 4500. After a few weeks of riding, I have decided that I would like to upgrade the seat, and possibly switch out the v-breaks for disc breaks.
I'm looking to spend about one hundred to one hundred and fifty dollars on each, so that would be a total of two to three hundred for both the new seat and disc breaks. Apart from that, my only condition is that the seat must retain the same style and profile as the stock seat.
Any recommendations?
Thanks guys, I appreciate your help a lot.
#2
Senior Member
Join Date: Jun 2009
Location: Chicago
Posts: 137
Bikes: Mongoose Snare
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Are your hubs disc ready on the rims? If not you will need to buy new rims to mount the disk rotors. That will consume your 200-300 bucks right there for a good set of rims or just the hubs and have a bike shop rebuild yours.
Do you have the disc mounts on the frame and front fork to mount the Calipers? If not you will have to have a bike shop add those to.
If your bike is disc ready check these out https://www.pricepoint.com/detail/150...203mm-2008.htm
For the seat https://www.jensonusa.com/store/produ...Saddle+Oe.aspx
Do you have the disc mounts on the frame and front fork to mount the Calipers? If not you will have to have a bike shop add those to.
If your bike is disc ready check these out https://www.pricepoint.com/detail/150...203mm-2008.htm
For the seat https://www.jensonusa.com/store/produ...Saddle+Oe.aspx
#3
Primate
Join Date: Jan 2006
Location: gone
Posts: 2,579
Bikes: Concorde Columbus SL, Rocky Mountain Edge, Sparta stadfiets
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Go ahead and upgrade the seat. Be comfortable.
Disc brakes would require different hubs, and therefore, wheels. You could probably do this for under $300 if you tried.
But a $300 upgrade on a new MSRP $689.99 bike?
Are you dissatisfied with the V-brakes in some way?
Disc brakes are not always better.
If money's burning a hole in your pocket, consider clipless pedals/shoes (if you haven't already).
That would be an ideal upgrade for the 4500.
Disc brakes would require different hubs, and therefore, wheels. You could probably do this for under $300 if you tried.
But a $300 upgrade on a new MSRP $689.99 bike?
Are you dissatisfied with the V-brakes in some way?
Disc brakes are not always better.
If money's burning a hole in your pocket, consider clipless pedals/shoes (if you haven't already).
That would be an ideal upgrade for the 4500.
#4
Senior Member
Join Date: Jun 2009
Location: Chicago
Posts: 137
Bikes: Mongoose Snare
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The 2010 4500 comes with disc brakes https://trekdg.com/itemdetails.cfm?libid=57866 so you could see if you could get a set of the 2010 OE rims and put them on yours to, that may save you some money .
#5
Newbie
Thread Starter
Join Date: Jul 2009
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Go ahead and upgrade the seat. Be comfortable.
Disc brakes would require different hubs, and therefore, wheels. You could probably do this for under $300 if you tried.
But a $300 upgrade on a new MSRP $689.99 bike?
Are you dissatisfied with the V-brakes in some way?
Disc brakes are not always better.
If money's burning a hole in your pocket, consider clipless pedals/shoes (if you haven't already).
That would be an ideal upgrade for the 4500.
Disc brakes would require different hubs, and therefore, wheels. You could probably do this for under $300 if you tried.
But a $300 upgrade on a new MSRP $689.99 bike?
Are you dissatisfied with the V-brakes in some way?
Disc brakes are not always better.
If money's burning a hole in your pocket, consider clipless pedals/shoes (if you haven't already).
That would be an ideal upgrade for the 4500.
As for disc breaks, it was more of an idea than a need. I've had one or two friends criticize the fact I have v-breaks. I understand that I am a novice and therefore am prone to being influenced one way or another by friends, so if you and other members here feel that upgrading my brakes on an entry level bike like mine is unnecessary, then I am open to your advice.
As for the money, I don't necessarily have it on hand. It was more of a point at which I was willing to save out of my next paycheck.
#6
Senior Member
Join Date: Jun 2009
Location: Chicago
Posts: 137
Bikes: Mongoose Snare
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
There is nothing wrong with v-brakes unless you are going in alot of mud. The tend not to work as well when the rims braking surface is really wet or muddy. Disc brakes also work better on big downhills they just have better stopping power. Dont worry about your v-brakes or what your friends have to say , just ride your bike and have fun.
#7
Primate
Join Date: Jan 2006
Location: gone
Posts: 2,579
Bikes: Concorde Columbus SL, Rocky Mountain Edge, Sparta stadfiets
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Seriously, your friends may not know what's best for you.
Get clipped in and drop the hammer on them.
Get clipped in and drop the hammer on them.
#8
Pot-bellied Biker
Join Date: Jul 2009
Location: Winnipeg, MB
Posts: 100
Bikes: '99 Trek 8000, '08 Giant Trance X2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
V-Brakes work great when they're set up well. Your "friends" are just trying to get you to spend money needlessly.
I'd agree with the clipless pedal/shoe route after you get the new seat. They're a wonderful thing!
I'd agree with the clipless pedal/shoe route after you get the new seat. They're a wonderful thing!
#9
=microburst=
Join Date: Mar 2009
Location: Oklahoma City, OK
Posts: 424
Bikes: Giant OCR3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Linear pull brakes are just fine for most applications. If you don't have the hubs, I probably wouldn't bother with upgrading to discs, although you might think about picking up some XT V's as a solid upgrade, as well as some Koolstop pads.
AND IT'S BRAKES! B-R-A-K-E-S!
AND IT'S BRAKES! B-R-A-K-E-S!
#10
Senior Member
Join Date: Jun 2008
Location: Eugene, OR
Posts: 593
Bikes: Jamis XLT 2.0, Kona Fire Mountain
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Seat, shoes and pedals and koolstop pads all sound like great upgrades to me. Koolstop salmon pads can be had for 12-20 bucks and make a world of difference, especially when riding in ****ty conditions.
#11
Newbie
Thread Starter
Join Date: Jul 2009
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#12
Newbie
Thread Starter
Join Date: Jul 2009
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#13
Primate
Join Date: Jan 2006
Location: gone
Posts: 2,579
Bikes: Concorde Columbus SL, Rocky Mountain Edge, Sparta stadfiets
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
I've always gone with a Shimano SPD or similar.
I'm currently on Ritchey SPD clones. 10 years of use.
As for the shoes, the fit is the thing. Good stiffness in the sole, and comfortable yet cradling the foot solidly. My favourites have been ones that have straps over the laces for maximum adjustability (Lakes).
I'm currently on Ritchey SPD clones. 10 years of use.
As for the shoes, the fit is the thing. Good stiffness in the sole, and comfortable yet cradling the foot solidly. My favourites have been ones that have straps over the laces for maximum adjustability (Lakes).
#14
Senior Member
Join Date: Jun 2008
Location: Eugene, OR
Posts: 593
Bikes: Jamis XLT 2.0, Kona Fire Mountain
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#15
Addicted to Dirt
Join Date: Oct 2007
Location: Socal
Posts: 227
Bikes: Stumpjumper Comp 09, Nishiki Prestige (1990)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Best investment you can make at this point is clipless and shoes....