Questions and riding areas
#1
Member
Thread Starter
Join Date: Aug 2004
Location: Illinois
Posts: 44
Bikes: 2003 Gt Avalnache 3.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Questions and riding areas
Being new to mountain biking I have a few questions.
Does x-c riding mean cross country riding and what is it?
What are chain rings and what do they do?
Is there any advantage to triple clamp forks as opposoed to just the regular ones?
Are htere any good riding areas around Springfield Illinois?
And what kind of maintenance should i do regularly to my bike?
Does x-c riding mean cross country riding and what is it?
What are chain rings and what do they do?
Is there any advantage to triple clamp forks as opposoed to just the regular ones?
Are htere any good riding areas around Springfield Illinois?
And what kind of maintenance should i do regularly to my bike?
#2
Wood Licker
Join Date: Apr 2002
Location: Whistler,BC
Posts: 16,966
Bikes: Trek Fuel EX 8 27.5 +, 2002 Transition Dirtbag, Kona Roast 2002
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
xc is an accumulative for mtbiking or sometimes ever trail riding. Just involves being off road and can be unpaved or ever nice single track.
Chaing rings are the part of your drive train the crank is closest to.
Dual Crowns/Triple Clamps are much stiffer and strong AND heavier and generally aren't needed for most riders.
Not a clue.
Depends on weather, riding and how you abuse your bike.
Chaing rings are the part of your drive train the crank is closest to.
Dual Crowns/Triple Clamps are much stiffer and strong AND heavier and generally aren't needed for most riders.
Not a clue.
Depends on weather, riding and how you abuse your bike.
#3
Senior Member
Join Date: Aug 2003
Location: colonial heights Va
Posts: 1,200
Bikes: Devinci Guzzler, 04 Canadian version
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
chain rings are the sprockets on the front of the drivetrain where your pedals connect to the crankarms then the crank. usually 3 or 2 sprockets on a mt. bike or hybrid.cross country can be any thing from a short gravel road to the Appalachian trail or wide enough for people to pass each other( doubletrack) to skinny, twisty, rooty,rocky,sandy,hilly, muddy,just plain nasty or in good shape but still narrow(singletrack). before a ride check your bike for obvious damage such as cracks in the frame or components,check for splits or fraying of your cables,check your brakes to make sure they are in good shape and adjust as needed, check to see if the gears are shifting ok. check tires for pressure and bubbles in the tread. check rims to make sure they do not look too much like a taco shell. as far as after ride or general maintenence make sure all parts that are supposed to move do so and all parts that should not do not, keep your chain clean after riding, as well as brakes, sprockets,rims( if you have rim brakes). if you ride in bad conditions you will need to lubricate your chain,cables, and bearings that are non sealed. a good LBS(local bike shop) can do a tune up for not a lot of money and the good ones will show you a lot of do it yourself tips to keep your bike in good shape between visits.for cross country riding a triple crown fork should be unneccesary. theres probably things I have left out but many here are very knowledgable and willing to share their expertese. welcome to the forums and happy riding