Replacing forks, measurement question
03-16-12, 08:43 PM
#1
Newbie
Thread Starter
Join Date: Mar 2012
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Replacing forks, measurement question
Hi and thanks in advance. I have a Trek 4600 that has RS Judy tt suspension forks on it. They are frozen and I am looking to replace them but i am not sure what measurements i need to look for when purchasing. wondering if someone might know off hand or tell me what i should measure to find for myself.
03-17-12, 02:03 PM
#2
Senior Member
Steerer tube diameter (it's probably 1 1/8", but it doesn't hurt to measure)
Steerer tube length: New fork steerer must be at least as long as the one it's replacing.
Axle to crown: From the axle to the top of the fork arch where the headset crown race sits. (Probably ~425ish mm)
Steerer tube length: New fork steerer must be at least as long as the one it's replacing.
Axle to crown: From the axle to the top of the fork arch where the headset crown race sits. (Probably ~425ish mm)
