Cyclocross Build - Brakes
Hey Guys,
I feel like this is a dumb question. Anyhow I assumed that I could use standard cantilver brakes for my build. Which worked fine for the rear. However on the fork I have screw on bosses, but no slots/holes for the tensioning spring of the cantilever brake. What do I need to do to fix my problem? Thanks for the help guys. |
Use one of the Canti type brakes that doesn't have an extended spring bit. The old Suntours were like that.
|
Paul's would be another option as they don't use that hole either...
|
Originally Posted by Tall_IA_Biker
Hey Guys,
I feel like this is a dumb question. Anyhow I assumed that I could use standard cantilver brakes for my build. Which worked fine for the rear. However on the fork I have screw on bosses, but no slots/holes for the tensioning spring of the cantilever brake. What do I need to do to fix my problem? Thanks for the help guys. You might want to check out the "New" Cantilever Brakes from Bruce Gordon Cycles http://bgcycles.com/brakes.html Regards, Bruce Gordon |
Originally Posted by bgcycles
You might want to check out the "New" Cantilever Brakes from Bruce Gordon Cycles
http://bgcycles.com/brakes.html Regards, Bruce Gordon |
Very pretty, I heard about these after the show. The issue I would have with these for CX is that point looks awful sharp for a rear canti. I think it would poke you in the back. I could sure see those on a Vanilla touring frame.
|
All times are GMT -6. The time now is 08:43 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.