Notices
Cyclocross and Gravelbiking (Recreational) This has to be the most physically intense sport ever invented. It's high speed bicycle racing on a short off road course or riding the off pavement rides on gravel like : "Unbound Gravel". We also have a dedicated Racing forum for the Cyclocross Hard Core Racers.

bmx v-brakes

Old 03-09-04, 01:08 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Mar 2004
Posts: 17
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
bmx v-brakes

i'm building up my first cross bike and trying to get around using canti's. has anyone got experience running bmx racing mini-v's with aero/road break levers? i'm thinking the shorter length of the bmx v brakes will allow enough clearance for cross tires and wheels, and will require less cable movement to be effective - any thoughts?
boomforeal is offline  
Old 03-09-04, 09:04 AM
  #2  
Direct Hit Not Required
 
BlastRadius's Avatar
 
Join Date: Nov 2003
Location: San Bruno, CA
Posts: 6,193

Bikes: Leopard DC1, Ridley X-Fire, GT Zaskar 9r

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time in 1 Post
I've seen them used on several cross bikes in pictures but I not heard about anyone's experience with them. I do have a set that I plan on using but just haven't gotten around to installing them. The Mini-Vs would certainly solve the problem with cable hangers not hanging low enough to have low stem heights.
BlastRadius is offline  
Old 03-09-04, 02:42 PM
  #3  
Not-so-Senior Member
 
Join Date: Jul 2003
Location: Norfolk, England
Posts: 805

Bikes: Orbea Enol roadie, Fly Micromachine BMX, Fort Track fixed

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Cycling Plus magazine recommends them highly, but Bhikku (sp?) on here couldn't get them to work properly. If I remember Tektro's Mini Vs are only £10 ($15) so it's not a huge waste of money if they don't work.
Jonny B is offline  
Old 03-10-04, 02:30 AM
  #4  
Junior Member
Thread Starter
 
Join Date: Mar 2004
Posts: 17
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
thanks guys. i can get a set for 10$, so i think i'm going to order them and give it a shot - i had some traumatic experiences with canti's during my courriering days, and don't think i could go back to trusting them.
boomforeal is offline  
Old 03-31-04, 02:28 PM
  #5  
Senior Member
 
Join Date: Jan 2003
Location: Oklahoma City
Posts: 65
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I asked a guy at the bike shop and he was less than encouraging. I would love to hear someone say, "Yes, the tektro mini-V's work great with shimano STI!" I mean isn't the issue with STI that they don't pull enough cable for normal linear. But with mini-V's you only have half of the lever arm so that should mean half of the linear pull required?
Zaphod is offline  
Old 03-31-04, 04:24 PM
  #6  
Senior Member
 
Join Date: Jan 2003
Location: Oklahoma City
Posts: 65
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
After some estimating, I'm doubtfull that it will work. The geometry of cantilever brakes make them equivalent to road brake pull. Linear pull is an entirely different situation even when scaled down to mini-V's. Here is a drawing of how I came to my conclusion... The top is a mini, the middle is a canti, and the last is a full size. The decimals are hard to see and the actual dimensions may vary, but I think this shows the point well enough. I assumed a 1/8" gap between the pad and the rim. To close the brakes, the pads have to move 1/4" collectively. So the large V-brakes ratio is 7 to 1 cable pull, the mini-V's ratio is 4 to 1 and the canti's ratio is about 2 to 1.

Last edited by Zaphod; 03-31-04 at 04:47 PM.
Zaphod is offline  
Old 03-31-04, 04:59 PM
  #7  
Direct Hit Not Required
 
BlastRadius's Avatar
 
Join Date: Nov 2003
Location: San Bruno, CA
Posts: 6,193

Bikes: Leopard DC1, Ridley X-Fire, GT Zaskar 9r

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by Zaphod
After some estimating, I'm doubtfull that it will work. The geometry of cantilever brakes make them equivalent to road brake pull. Linear pull is an entirely different situation even when scaled down to mini-V's. Here is a drawing of how I came to my conclusion... The top is a mini, the middle is a canti, and the last is a full size. The decimals are hard to see and the actual dimensions may vary, but I think this shows the point well enough. I assumed a 1/8" gap between the pad and the rim. To close the brakes, the pads have to move 1/4" collectively. So the large V-brakes ratio is 7 to 1 cable pull, the mini-V's ratio is 4 to 1 and the canti's ratio is about 2 to 1.
Very interesting. Boomforreal, any updates on how the mini v's you ordered are working out?
BlastRadius is offline  
Old 04-01-04, 07:06 PM
  #8  
Year-round cyclist
 
Join Date: Apr 2002
Location: Montréal (Québec)
Posts: 3,023
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
In theory, the Tektro mini-v brake is designed to work with road levers. By having 75-mm arms instead of 103-mm arms, the brakes need to pull about the same cable length as cantis.

Their main drawback is, precisely, that their arms are only 75 mm. They work well with tires up to 32-35 mm (37 would be a tight fit) if you don't have fenders, or with tires up to 25-28 m, if you have fenders.

Other objections I have heard were related to either squeeking noise or crappy brake pads. Replace these with a set of Kool Stop and you should be in business.

Regards,
Michel Gagnon is offline  
Old 04-02-04, 05:19 PM
  #9  
'possum killer
 
chuckfox's Avatar
 
Join Date: Apr 2004
Location: Ames, Iowa
Posts: 252

Bikes: mountain bike (Litespeed Pisgah), touring bike (Giant Frankenbike), tandem (Burley Samba), fixie (Raleigh Rush Hour)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 8 Times in 1 Post
I just installed Tektro Mini-Vs on my touring bike today. They work fine with road levers, mine are cheap Tektro road levers. They are a tight fit on my setup. I'm running Panaracer 37mm tires with Freddy Fenders. The cable cover does touch the fenders, but the brakes work fine. Excellent braking power on the front, a bit mushy on the rear. I may be able to fine tune that a bit. One alternative may be better cable housings to get rid of the mushyness. Bottom line--they work fine with road levers.
chuckfox is offline  
Old 04-02-04, 08:30 PM
  #10  
Direct Hit Not Required
 
BlastRadius's Avatar
 
Join Date: Nov 2003
Location: San Bruno, CA
Posts: 6,193

Bikes: Leopard DC1, Ridley X-Fire, GT Zaskar 9r

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by chuckfox
I just installed Tektro Mini-Vs on my touring bike today. They work fine with road levers, mine are cheap Tektro road levers. They are a tight fit on my setup. I'm running Panaracer 37mm tires with Freddy Fenders. The cable cover does touch the fenders, but the brakes work fine. Excellent braking power on the front, a bit mushy on the rear. I may be able to fine tune that a bit. One alternative may be better cable housings to get rid of the mushyness. Bottom line--they work fine with road levers.
Good info. I'd be using them with Freddys and 35mm tires so it sounds like they would fit.
BlastRadius is offline  
Old 04-02-04, 09:44 PM
  #11  
'possum killer
 
chuckfox's Avatar
 
Join Date: Apr 2004
Location: Ames, Iowa
Posts: 252

Bikes: mountain bike (Litespeed Pisgah), touring bike (Giant Frankenbike), tandem (Burley Samba), fixie (Raleigh Rush Hour)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 8 Times in 1 Post
Originally Posted by BlastRadius
Good info. I'd be using them with Freddys and 35mm tires so it sounds like they would fit.

You should be able to fit them just fine. I'm still tweaking a bit, I lowered the Freddys as low as I could and the metal crosspiece that the noodle fits into just rubs the fender a little when braking. I notice the front fender tip drop just slightly when I apply the brakes. You may be able to get a bit more clearance with the 35mm tires. Good luck!
chuckfox is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.