Tubular V.s Clincher
#1
Member
Thread Starter
Join Date: May 2009
Location: Fargo, ND / Iraq (Deployed USMC)
Posts: 30
Bikes: Kona Jake
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Tubular V.s Clincher
For being geared towards racing, I was wondering what do you guys run? And why?
#2
Senior Member
Join Date: Dec 2005
Location: Charlottesville, Virginia
Posts: 1,990
Bikes: Dawes Kalahari, Puch Prima Super Sport, Graham Weigh 853
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I bought tubulars last year and glued them myself. I flayed a clincher tyre on a rough course, so I had to bring on the tubs. They are night and day better in terms of ride. Bumpy courses are handing far better, and you can get good cornering grip (with the right tyres).
You can do very well on clinchers. But you will always be walking a line between the low pressures that will help you win and the high pressures that will stop you from pinch flatting and losing. With tubs, that is gone.
You can do very well on clinchers. But you will always be walking a line between the low pressures that will help you win and the high pressures that will stop you from pinch flatting and losing. With tubs, that is gone.
#3
Senior Member
Join Date: Dec 2004
Location: Athens, Ohio
Posts: 5,104
Bikes: Custom Custom Custom
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Hands down tubulars. Rides better, corners better and you can run super low pressures without risks of flats.
A cheaper alternative would be tubeless. You can't run as low a pressure as tubulars but lower than tubed clinchers
A cheaper alternative would be tubeless. You can't run as low a pressure as tubulars but lower than tubed clinchers
#4
Senior Member
Join Date: Dec 2005
Location: Sunny Tampa, Florida
Posts: 1,542
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 49 Times
in
41 Posts
I race sewups and abuse them on trails off-season when I've got some to use up. Hate the idea of retiring them if they've got any life left.
Night and day better than clinchers.
Night and day better than clinchers.
#6
.
Join Date: May 2006
Location: Hillsboro, Oregon
Posts: 3,981
Bikes: Specialized Roubaix Comp, Soma ES
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How about tubular clinchers? I've got one, but I've never used it. Looks like an interesting idea, although the availability and cost are not attractive.
__________________
Demented internet tail wagging imbicile.
Demented internet tail wagging imbicile.
#7
hehe... member
Join Date: Dec 2005
Location: Pittsburgh, PA
Posts: 665
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I gotta say though, unless you are racing at the top level, tubulars are kind of overkill. After trying them last season I had a hard time (rolled one, flatted another), while I've never had any trouble with clinchers.
Don't get me wrong, tubs are great, but for a mid-pack B racer like me, clinchers are waaaay easier. I have several treads I can switch around in minutes.
Don't get me wrong, tubs are great, but for a mid-pack B racer like me, clinchers are waaaay easier. I have several treads I can switch around in minutes.