Help! Pinch flats in front!
#1
Senior Member
Thread Starter
Join Date: Sep 2007
Posts: 274
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Help! Pinch flats in front!
I've been riding my cross bike that I just built a fair amount, and am really enjoying it.
However, I'm becoming increasingly frustrated because in the space of a week, I've gotten three pinch flats on my front tube.
I'm only 140lbs, and haven't been riding the psi really low...maybe 40psi at the lowest?
Anyone have any ideas of what could be causing them or what I could do differently?
Thanks a lot.
However, I'm becoming increasingly frustrated because in the space of a week, I've gotten three pinch flats on my front tube.
I'm only 140lbs, and haven't been riding the psi really low...maybe 40psi at the lowest?
Anyone have any ideas of what could be causing them or what I could do differently?
Thanks a lot.
#3
Senior Member
Thread Starter
Join Date: Sep 2007
Posts: 274
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I suppose it could be, though i've been using these wheels for two+ years on the road with 23c tires and have never had a flat on my front tube.
#4
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
How narrow are the rims? How wide are your tires? What size tubes are you using? What's your psi?
#6
Senior Member
Join Date: Jul 2007
Posts: 2,119
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What sort of things are you pinch-flatting on? You might have to ride with your weight back more, and use a bit more technique over rocky/rooty/curby things.
#9
Team Beer
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,339
Bikes: Too Many
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 159 Times
in
104 Posts
I'm wondering how true your pressure gauge is. For clinchers I use tubes that have removable valve cores and I add some sealant like Stan's.
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#10
Senior Member
Join Date: Jun 2008
Posts: 411
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sealant is a great idea. your gage could be wrong. 40 psi in cross tires feels firm but you can still deflect the tire a bit.
When you ride over rocks/ roots do you ever feel them hit the rim? if so you clearly are running too low a psi.
When you ride over rocks/ roots do you ever feel them hit the rim? if so you clearly are running too low a psi.
#11
Typical Scum
Join Date: Jul 2010
Location: Floyds Knobs, IN
Posts: 326
Bikes: 2010 CAAD 9-5 | 2009 Giant Anthem X2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Having worked in a MX shop for years, I found that sealant typically, if left alone, would corrode the rim and make it so nasty that you didn't want to mess with it. Is this common on bicycle applications as well, or do you typically change tires often enough that it's not sitting for very long?
#12
Senior Member
Join Date: Jun 2008
Posts: 411
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Assuming one runs normal tubes the sealant should not ever hit the rim. Also if one runs tubless there is a rubber rim strip that covers almost the entire rim. Finally the aluminum rims probably corrode differently than steal rims.
#13
Typical Scum
Join Date: Jul 2010
Location: Floyds Knobs, IN
Posts: 326
Bikes: 2010 CAAD 9-5 | 2009 Giant Anthem X2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
yeah, that's really my question, sorry for being unclear - aluminum vs steel (which is what i saw). Obviously not tubed tires, but in the tubeless applications.
#14
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
I think something unseen is going on here. Are you sure these are pinch flats? I weigh 195 and have raced with 700x30 tires as low as 30 psi, and I have never had a problem with pinch flats. All the theory says I should.
I use 700x28-35 tubes, usually whatever I can get cheap from Price Point or Performance. I put baby powder on the tubes before installing them. I don't know how much that matters. I'm sure my riding style is a factor, but I couldn't tell you what I do that helps. I often hit things head-on rather than glancing. That's not so good for my speed but probably helps the tubes.
How careful are you when you install a tube? I generally pump the tire up to abotu 15 psi and then rock it back and forth to try to make sure the tube and tire are seated properly. If the tube is pinched when you install it, it's only a matter of time before it flats.
Thicker tubes could help. Also, check the rim for damage and make sure there's nothing embedded in your tire.
I use 700x28-35 tubes, usually whatever I can get cheap from Price Point or Performance. I put baby powder on the tubes before installing them. I don't know how much that matters. I'm sure my riding style is a factor, but I couldn't tell you what I do that helps. I often hit things head-on rather than glancing. That's not so good for my speed but probably helps the tubes.
How careful are you when you install a tube? I generally pump the tire up to abotu 15 psi and then rock it back and forth to try to make sure the tube and tire are seated properly. If the tube is pinched when you install it, it's only a matter of time before it flats.
Thicker tubes could help. Also, check the rim for damage and make sure there's nothing embedded in your tire.