Disk brake retrofit for BikeE AT?
#1
Senior Member
Thread Starter
Join Date: Oct 2002
Location: Pennsltucky
Posts: 129
Bikes: BikeE AT--Gary Fisher DF
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Disk brake retrofit for BikeE AT?
I'd like to know if I can upgrade my BikeE AT to front disk brakes. I know the RX came with disk brake on front. As far as I know, it's not possible on the rear because of the internal hub. Has anyone done this? Is it even possible? Any help/ideas appreciated.
Thanks,
John
Thanks,
John
#2
substandard member
Join Date: Mar 2005
Posts: 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
About the only disc brake install requirements are;
1. Fork w/caliper mounting tab(s) (IS 51mm prefered)
2. Six bolt (IS) disc compatible hub laced to your favorite rim
3. Disc brake assembly
On a 20" (406mm) wheel, I would suggest a rotor diameter no larger than 140mm.
1. Fork w/caliper mounting tab(s) (IS 51mm prefered)
2. Six bolt (IS) disc compatible hub laced to your favorite rim
3. Disc brake assembly
On a 20" (406mm) wheel, I would suggest a rotor diameter no larger than 140mm.