silversmith

I have an older entry-level Fuji Pulsar (50-51 cm) in like new condition. 27" wheels and five speed freewheel. I've repacked all bearings -headset, BB, hubs- and the bearings/races are like when they left the factory circa 1980.

Its a "gaspipe" hi-tensile lugged steel frame but free of any rust, dings, or problems.

(closer shot https://users.cis.net/coldfeet/pulsar.JPG )



Also, vision troubles prompt me to offer my beautiful old Bear Archery recurve bow. The 45 lb pull wood/fiberglass bow is in very good condition.



& also see https://users.cis.net/coldfeet/bear2.JPG

----

I'm looking for:

700c Campy compatible clincher wheelset or hubset with 130mm spaced rear.



Campy Centaur "Century" gray rear derailleur, or front & rear Centaur gray caliper brakes. I'd also consider any other decent gray-colored derailleur or brake calipers.

Nitto "Moustache" bar.


----


I'll ship the bow anywhere. The bike might be easier for dropoff/pickup (or meet halfway) for anyone in the Quad-cities Illinois/Iowa area, but I can check out shipping the bike, too.

sctrackboy

I have a 1 or a set of specialized carbon tri spokes (like hed3). The front wheel will work on most bikes but the rear will will only work on a 7/8speed i think b/c its a freewheel system. I am looking for a set of trispoke wheels, spinergy 4spoke wheels, or a disc wheel with hub systems if anyone is interested. pm me for pictures

aham23

i have shimano sora shifters.

i have shimano tiagra 9 speed REAR DERAILLEUR.

i have a SRAM 850 12-26, 8 speed cassatte.

the above are off my 05 trek 1000 with 400 miles on them with no crashes/wrecks.

also, i have a cateye cordless 7 cyclocomputer with new accessories, mounting brackets, sensor and magnet.

i need a stem. prefer newer. mostly black. 100 mm, 5 to 10 degree rise, standard clamp 26.0

thanks.

H1449-6

Here's a long shot.

I have a full 8s Dura Ace with STI kit that I'd like to trade for a Chorus or Record Ergo 8s kit.

Guest

I'm about 90% sure I saw someone in the For Trade Singlespeed/Fixie forum with Campy Record for trade (I think... I think!). Check out their thread.

Koffee

silversmith

25. kalloy seatpost for straight-up swap for 26.mm

frogman_94

I have a Cannondale Slice full carbon fork that is cut a little too short for me. I would like to trade it for a new uncut fork of the same.

uga8589

What I have: Mint Condition Polar 725X HRM w/CAD. This has some extra stuff that I am putting with it. I have purchased several of the older model Polar Bike Mounts that are far superior to the new bike mount they include with the product. I also purchased and will include a ZeProEdge Bike Mount. This is an innovative design that is very attractive and very aero. I have all the original packaging, manuals software, etc. This is a Christmas present and is the latest model from Polar. It replaced the 725. I have no idea what the difference is.

Will include a Polar Power Output Sensor. This is Polar ultimate accessory. It measures power (watts) and pedaling efficiency. I have not mounted or used this unit and it is still in its original box. It comes with a special bike mount.

Finally, I have the infared/USB device that allows you to transfer your information to your PC. These items are mint. No scratches, gouges or visible signs of wear.

What I want: I am looking to build my own bike. I would like to have a steel or aluminum frame. My current bike is a 58 cm frame, so I will need something close to that. Please PM me with any questions or offers. Thanks!

PS - Koffee - Did I do better this time? Thanks for your help!


Thanks for looking, I have successfully completed a deal.

Guest

Works fine! Good luck!

Koffee

GoJavs

Have:

Lake CX101 Black/Blue Shoes - used once, with LOOK cleats size 45
Campy C-Record era Crankset 53/39 very good shape
White Selle Italia Turbo Perforated NOS
White Selle San Marco Rolls Perforated NOS
Honey-colored Selle Italia Flite - fair shape, small rip on one side
Black Selle Italia Flite - fair shape, no tears.
Nitto Pearl Quill Stem (10 cm), 10.8 in reality

Want:

Avocet 02 40M saddle (not the 40R)
Concor Supercorsa or America or Max Saddle
172.5 or 175.0 Ultegra or 105 Octalink Crankset
Cinelli 12.0cm 1A, 1R or XA quill stem


I'll come up with more stuff to trade. If you've got what I need, I'll dig...!

Pm with offers. Thanks!

nitropowered

Trade:
2005 Mavic Ksyrium Elite Shimano freehub. ~3,500 miles, never wrecked. Came stock with my 2005 Cannondale.

Looking for:
Tubular rims (preferably 24 hole or less)
White Industries Hubs -or- DT Swiss Hubs (yes DT makes a 24hole 240s hub, its in the 2006 QBP dealer cataloge/book)
Spokes
Tubular tires

bigbossman 

I need a decent 700c rear wheel with a 9sp cassette body/hub. Cassette not necessary, but definitely a plus.

I have some 700c 6 and 7 speed wheelsets (with freewheels/cassettes) to trade, a rear 700c 7 speed Exage hub laced to a Campy rim, and a WheelWorks semi-aero rear wheel laced to a 7 speed Shimano FH-2200 hub (with cassette).

Also, I have a couple of saddles - 1 Selle Italia Genuine Gel Flite and 1 older Selle Italia Flite Ti.

I also have a pile of misc parts, so if you're looking for something specific, drop me a line.

riotboy

have:
campagnolo mirage brake calipers
Look 136 clipless pedals
and some other random junk

want:
shoes!!! sz 42 show me what you got

Caveman

Have: 54cm Surly Crosscheck frameset in almost new condition with an installed Cane Creek S2 headset

Want: 56cm Surly steamroller

Caveman

Have: 1. 54cm Surly Crosscheck frameset (almost new condition with an installed Cane Creek S2 headset)
2. Sun Rynolite/XT wheelset (silver, about 300 miles on the set)
3. Set of Avid Shorty 4 brakes (front and rear)
4. Dura-Ace 9sp bar end shifters (almost new, no cables or housing)
5. Salsa Delgado Cross/XT wheelset (excellent condition, about 700 road miles on the set)

Want: 1. 56cm Surly steamroller frameset
2. Shimano 105 or better shifters
3. Dura-Ace 7700 brakes

neilG

I have: these steel stems, top to bottom 13.5, 14 (yes, really), 10.5 and 13. All made by Nitto, top 3 for Ritchey. All for 1'' steerers, 26mm bars. The decals do come off with solvent.


I also have:
Campy NOS 8 spd hub, not sure of model, probably Chorus
Zeus track cogs, 19 teeth, made of aluminum alloy. I have 2, one used, one hardly used.
Chorus seatpost, 27.2, aero-ish shape, about 180mm


I want:

52 or 50 tooth 135 (Campy or compatible)BCD chainring, road or track.
Steel track bars, 40 or 42 cm
16 tooth cog,
A good seat to try other than this wretched Fizik Arione
Bolt-on type front skewer
Rear track hub of good quality, 32 or 36
A good building contractor in Ventura CA

GoJavs

Those are sweet stems. They are aluminum though, aren't they? I've got a couple of them on my bikes...Not the right length, otherwise I'd play.

Good luck with the building contractor. If they are anything like they tend to be in South Florida, you are in for a long search!

redcurrycelt

Have: Mavic low-flange hub laced radially with bladed spokes to 650c tubular Ambrosio grey-ano rim. Good used condition. Perfect for a TT, pursuit, or small road bike.

Want: 700c clincher road wheel that can accept a 9-speed Shimano cassette.

Local swap in San Francisco a plus.

mikorp

WANT: 650c tri spoke clincher front wheel.

WANT: 700c tri spoke clincher front wheel.

HAVE: track, fixed gear parts.

thanks!!!!!

neilG

[QUOTE=GoJavs]Those are sweet stems. They are aluminum though, aren't they?[QUOTE]

No, those are all steel. Nice and stiff even in those long sizes.

CanuckNewbie

Have: 11-23 DuraAce 7800 cassette, in very good condition, max 2000km on it
almost new shimano R540 pedals
almost new Fizik Airione, all black



Want: 12-27 new Ultegra 10 cassette,
or new good Tri shoes, mens sz 11
Carbon Aero bars, like profile stryke
open to other options,
please PM

Guest

I just deleted some posts dealing with money. Again, this is a TRADE ONLY THREAD. Further posts with regards to purchasing, or involving money will result in the thread being closed permenantly.

Koffee Brown

Moderator

Downshift

I am looking for:

Brooks saddle in black
Brooks saddle bag
Thompson seat post (silver) in 27.2


Have:
Very new Selle Flite Gel Flow (the really nice one, Ti rails)
Shimano R550 wheelset (less than 500 miles, no cassette)
FSA SL-K Carbon Compact crankset 50-34 (less than 1000 miles) with bottom bracket-spoken for
Brand new Blackburn Fluid trackstand trainer
105 Brifters 9-spd, few small scratches on the replaceable nameplate thingy (I can send pics, it's nothing major)-spoken for
Cannondale house brand brakes-spoken for
Some crazy Selle that is red with the Jan Uhlrich embroidery?? I'll send pics if you're interested

PM me if you're interested.
Thanks

Matthew A Brown

Have: Phil Wood BB, stainless steel, 119mm (R+4). Installed, pretty much no miles.

Want: Same, <111mm, non-Campy.


Still have: 2002 Ultegra Triple (V1 spline), 175, well-scratched, ~5000 miles touring. Middle ring is well-worn, inner and big rings are close to untouched by chain.

Still want: Ultegra Double (V1 spline), 165-167.5, whatever cosmetic condition, rings unimportant.

Look compatible road shoes: 10.5/45ish. (Is it me or do the Lakes seem to run big?)

hummerh20

thanks for sharing everyone