Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Best way to protect the paint/finish from spring dirt?

Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

Best way to protect the paint/finish from spring dirt?

Old 03-03-06, 11:11 AM
  #1  
Senior Member
Thread Starter
 
Join Date: Dec 2005
Location: Okanagan Valley, BC CANADA
Posts: 1,049

Bikes: Trek 7300FX, Lemond Sarthe

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Best way to protect the paint/finish from spring dirt?

I took my bike off the trainer and went out for my first ride of the year yesterday. Nice to be out, but man, the gravel and crap on the roads is something else. I'm thinking of putting some wax or something (maybe turtle wax?) on my down tube and bottom bracket area to protect the paint from the sand and gravel that's thrown up by the front wheel. Does anyone else do something similiar and what do you use?
bccycleguy is offline  
Old 03-03-06, 11:30 AM
  #2  
Former Hoarder
 
55/Rad's Avatar
 
Join Date: Jan 2004
Location: Portland & Yachats, OR
Posts: 11,735

Bikes: Seven Axiom, Felt Z1, Dave Moulton Fuso

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Liked 7 Times in 7 Posts
I think I saw a lizard skin for the downtube - maybe it was the entire frame?

Other than not riding, there is not much you can do. Wax may work but I'd be real careful - check your clearcoat finish before putting any waz on it.

55/Rad
__________________
55/Rad is offline  
Old 03-03-06, 12:06 PM
  #3  
pan y agua
 
merlinextraligh's Avatar
 
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,273

Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike

Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1428 Post(s)
Liked 697 Times in 353 Posts
buy titanium, no paint to worry about
merlinextraligh is offline  
Old 03-03-06, 02:06 PM
  #4  
I-M-D bell curve of bikn'
 
Join Date: Dec 2005
Location: NC mountains
Posts: 2,926

Bikes: 06' Jamis Eclipse in the making.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
spring dirt? Is that different than winter, fall, and summer dirt?

Just kidding! Just face the fact your bike is eventually going to get nicked and scratched. Clean it after an especially dirty ride with a commercial road bike cleaner and wipe down. That is all you can do.
__________________
Ego Campana Inflectum of Circuitous
msheron is offline  
Old 03-03-06, 02:19 PM
  #5  
South Jersey
 
Join Date: May 2005
Location: Egg Harbor Twp. NJ
Posts: 370

Bikes: Fuji SC Team, Trek STP 400, C-Dale F700, a myriad of old collectable, retired ELF BMXer

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
First ride of the year??? just kidding, you could always throw one of those Raceblade front fenders on, pretty terrible for water, but it should do the trick for the solid stuff on the road.
C4Byke is offline  
Old 03-03-06, 02:57 PM
  #6  
Senior Member
 
mpearson76's Avatar
 
Join Date: Oct 2004
Location: Princeton, NJ
Posts: 276

Bikes: Klein q-pro carbon, Record, Ksyrium SSC

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I wonder if you could find some of that clear vinyl that they make removable static-cling window stickers out of in some kind of large sheet that you could cut a rectangle out of to stick on the bottom half of the downtube. It would be strong enough to protect the paint, yet it would peel away cleanly. I have no idea where you would get it though--Maybe Home Depot sells something made out of that stuff to insulate windows.
mpearson76 is offline  
Old 03-03-06, 03:14 PM
  #7  
Senior Member
 
rufvelo's Avatar
 
Join Date: Jun 2005
Posts: 4,201
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
If you really care so much...

...strips of Cling-Wrap on the lower downtube, bottom-bracket and upper top-tube(for sweat) just for the ride, remove after ride and wipe the bike down. Remember, many small pieces, not one long/huge piece that would loosen and get caught somewhere while you're riding.
rufvelo is offline  
Old 03-03-06, 03:48 PM
  #8  
Junior Member
 
Join Date: Mar 2005
Posts: 17
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
A nicked up bike sounds like a good reason to go buy a new bike....
amhall is offline  
Old 03-03-06, 05:02 PM
  #9  
Senior Member
 
Flywolf's Avatar
 
Join Date: Feb 2006
Location: Milwaukee, WI
Posts: 582
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by mpearson76
I wonder if you could find some of that clear vinyl that they make removable static-cling window stickers out of in some kind of large sheet that you could cut a rectangle out of to stick on the bottom half of the downtube. It would be strong enough to protect the paint, yet it would peel away cleanly. I have no idea where you would get it though--Maybe Home Depot sells something made out of that stuff to insulate windows.
That’s exactly what I have in my mtb downtube lower part, seat stay and lower part of the seat tube, I used the hell out of my mtb and only have very few chips outside the protected area, its great for protecting the paint.

The problem its very hard to find a good quality one, I don't have any left otherwise I would be happy to give it to you.

Also keep in mind I only tried on aluminum frames.
Flywolf is offline  
Old 03-03-06, 05:17 PM
  #10  
Prefers Aluminum
 
Sprocket Man's Avatar
 
Join Date: Feb 2005
Location: Honolulu
Posts: 2,669

Bikes: Wife: Trek 5200, C'dale Rush Feminine, Vitus 979 Me: Felt S25, Cervelo Soloist, C'dale Killer V500, Miyata Pro (fixie)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times in 1 Post
I've seen this in the Excel catalogue. I've never used it before, so I can't give a recommendation, but if it works as they say it does, this should do the trick.

https://www.excelsports.com/new.asp?p...rCode=VELOSKIN
Sprocket Man is offline  
Old 03-05-06, 12:54 AM
  #11  
Senior Member
 
Flywolf's Avatar
 
Join Date: Feb 2006
Location: Milwaukee, WI
Posts: 582
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I don't know if you can see it in the pic, but here is what I have on my mtb, this pic is for the downtube by the sprocket

Flywolf is offline  
Old 03-05-06, 01:04 AM
  #12  
Nightrider
 
Jared88's Avatar
 
Join Date: Sep 2005
Location: Singapore
Posts: 445

Bikes: Ellsworth , Scott , Giant

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Flywolf
I don't know if you can see it in the pic, but here is what I have on my mtb, this pic is for the downtube by the sprocket

Nice bike.
Jared88 is offline  
Old 03-05-06, 01:09 AM
  #13  
Senior Member
 
Flywolf's Avatar
 
Join Date: Feb 2006
Location: Milwaukee, WI
Posts: 582
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Thanks Jared88
Flywolf is offline  
Old 03-05-06, 05:49 AM
  #14  
Senior Member
 
Join Date: Feb 2001
Location: England
Posts: 12,948
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 7 Times in 7 Posts
Turtle wax does the job well. I use it on my all-weather commuter bike.
MichaelW is offline  
Old 03-05-06, 08:51 AM
  #15  
Senior Member
 
rufvelo's Avatar
 
Join Date: Jun 2005
Posts: 4,201
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Flywolf
I don't know if you can see it in the pic, but here is what I have on my mtb, this pic is for the downtube by the sprocket
Flywolf, what product are you using? Have you tried peeling it off - does it leave a residue?

I've used some cling-wrap many years ago and it worked fine - just got tired after 1000 miles and didn't care anymore But if it is a made for purpose product like the 3M mentioned here I'll probably use on my newest build.
rufvelo is offline  
Old 03-05-06, 09:08 AM
  #16  
Senior Member
 
Flywolf's Avatar
 
Join Date: Feb 2006
Location: Milwaukee, WI
Posts: 582
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by rufvelo
Flywolf, what product are you using? Have you tried peeling it off - does it leave a residue?

I've used some cling-wrap many years ago and it worked fine - just got tired after 1000 miles and didn't care anymore But if it is a made for purpose product like the 3M mentioned here I'll probably use on my newest build.
Its similar to the 3M mentioned above, but its slightly a higher industrial grade I got from a friend of mine.

That area you see in the pic gets the most beating in a mtb, you can see it really protected that area, A small piece peeled off and started collecting mud and water, I cut it off and cleaned it and no signs of any residue, I don't know if I would use it on my carbon frame though.

edit: just went and peeled off a corner, very slight residue, also its not a cling static type, its a strong adhesive type, so I wouldn’t use it on a carbon frame.

Last edited by Flywolf; 03-05-06 at 09:21 AM.
Flywolf is offline  
Old 03-05-06, 09:42 AM
  #17  
Baby it's cold outside...
 
ViperZ's Avatar
 
Join Date: Jul 2005
Location: SK, Canada
Posts: 7,310

Bikes: Trek 5000, Rocky Mountain Wedge, GT Karakoram K2, Litespeed Tuscany

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
You can buy a small roll of the clear protector at your local Automotive store.

The stuff I use on my bikes and cars is called Gilla. It is a clear flim like 3M that does not yellow over time. I purchased a 6 foot roll at Canadian Tire



https://www.gilafilms.com/Automotive/...protection.htm

Try that link above, they have a Free sample you can request, that would probably be enough for your bike
__________________
-Trek 5000* -Project Litespeed* -The Italian Job* -Rocky Wedge* -The Canadian Connection*
ViperZ is offline  
Old 03-05-06, 11:13 AM
  #18  
Senior Member
 
Flywolf's Avatar
 
Join Date: Feb 2006
Location: Milwaukee, WI
Posts: 582
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by ViperZ
You can buy a small roll of the clear protector at your local Automotive store.

The stuff I use on my bikes and cars is called Gilla. It is a clear flim like 3M that does not yellow over time. I purchased a 6 foot roll at Canadian Tire



https://www.gilafilms.com/Automotive/...protection.htm

Try that link above, they have a Free sample you can request, that would probably be enough for your bike
Sound good to me
Flywolf is offline  
Old 03-05-06, 04:03 PM
  #19  
Senior Member
 
mpearson76's Avatar
 
Join Date: Oct 2004
Location: Princeton, NJ
Posts: 276

Bikes: Klein q-pro carbon, Record, Ksyrium SSC

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by ViperZ
You can buy a small roll of the clear protector at your local Automotive store.

The stuff I use on my bikes and cars is called Gilla.
Try that link above, they have a Free sample you can request, that would probably be enough for your bike
Thanks for the tip!
mpearson76 is offline  
Old 03-05-06, 05:13 PM
  #20  
DocRay
Guest
 
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
3M makes 2" wide clear polyvinyl tape.
Another trick to prevent crud from sticking is silicone dry lube spray-just don't get it on the braking areas.
 
Old 03-05-06, 05:20 PM
  #21  
Senior Member
 
MrCjolsen's Avatar
 
Join Date: Nov 2004
Location: Davis CA
Posts: 3,959

Bikes: Surly Cross-Check, '85 Giant road bike (unrecogizable fixed-gear conversion

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 4 Times in 3 Posts
Don't worry about dirt on your frame any more than you worry about your car getting dirty. Do worry about dirt getting in your drivetrain. It gets kicked up into your chain by your front wheel, and into your rear derailleur by by your back wheel. Raceblades won't necessarily cut it for the latter.
MrCjolsen is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.