Best frame pump?
06-06-07, 10:44 AM
#1
Raleighroader
Thread Starter
Join Date: Feb 2006
Location: Kansas City
Posts: 84
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Best frame pump?
I have gone to CO2 for my road ride on weekends, but for my commute I still would like a pump. If I should have two flats on the same ride, the pump makes it much easier to patch the tube, because you can pump it up to find the leak, fix the leak, and then pump up again, without spending two or three CO2 cartridges in the process.
My question is, what brand or brands of pump do the best job of getting the tire back up to at least 90-100 lbs?
My question is, what brand or brands of pump do the best job of getting the tire back up to at least 90-100 lbs?
06-06-07, 10:47 AM
#2
Member
Join Date: May 2006
Location: Athalmer, BC
Posts: 37
Bikes: 1997 Norco Nitro, 2007 Fuji Roubaix
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
General consensus here is for the Topeak Road Morph. I don't have one yet, but it's on my shopping list.
Not a true "frame pump" like the long ones that hold themselves under your top tube, but there are several mounting options; a search of BF will reveal them all...
Not a true "frame pump" like the long ones that hold themselves under your top tube, but there are several mounting options; a search of BF will reveal them all...
06-06-07, 10:49 AM
#3
Master of the Obvious
Join Date: May 2007
Location: Muncie, Indiana
Posts: 456
Bikes: Fuji
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by daz-o-matic
General consensus here is for the Topeak Road Morph. I don't have one yet, but it's on my shopping list.
Not a true "frame pump" like the long ones that hold themselves under your top tube, but there are several mounting options; a search of BF will reveal them all...
Not a true "frame pump" like the long ones that hold themselves under your top tube, but there are several mounting options; a search of BF will reveal them all...
06-06-07, 10:52 AM
#4
Senior Member
Silca with a Campy head. I've had mine on the frame of the bike for over twenty years. Looks like crap but has never failed, with zero maintenance. Pumps up to over 100 psi with no problem. Limiting factor on pressure is how much pain I can endure in the palm of my hand.
__________________
Il faut de l'audace, encore de l'audace, toujours de l'audace
1980 3Rensho-- 1975 Raleigh Sprite 3spd
1990s Raleigh M20 MTB--2007 Windsor Hour (track)
1988 Ducati 750 F1
Il faut de l'audace, encore de l'audace, toujours de l'audace
1980 3Rensho-- 1975 Raleigh Sprite 3spd
1990s Raleigh M20 MTB--2007 Windsor Hour (track)
1988 Ducati 750 F1
06-06-07, 11:48 AM
#6
Senior Member
Topeak Morph. Either the road morph or mountain morph or even mini morph are great pumps.
06-06-07, 12:04 PM
#7
Making a kilometer blurry
Zefal HPX. I've had others and always come back to this pump. I just got a new one today so I can move the old one over to my single-speed.
It fits very nicely along my left seat stay. I have pumped to 130psi with it, and could have gone higher.
I've used the RoadMorph, and it's fine, but I wouldn't buy one as long as HPXs are available. RoadMorph is a good 2nd place though. I just don't know why you need to mess with the floor action. I've never had a problem with the traditional frame pump action, and felt like setup was too cumbersome with the RoadMorph. Plus, there are too many parts. Carry it around on your bike long enough, and stuff's going to get gummed up or broken -- fewer parts means more reliable.
It fits very nicely along my left seat stay. I have pumped to 130psi with it, and could have gone higher.
I've used the RoadMorph, and it's fine, but I wouldn't buy one as long as HPXs are available. RoadMorph is a good 2nd place though. I just don't know why you need to mess with the floor action. I've never had a problem with the traditional frame pump action, and felt like setup was too cumbersome with the RoadMorph. Plus, there are too many parts. Carry it around on your bike long enough, and stuff's going to get gummed up or broken -- fewer parts means more reliable.
06-06-07, 12:09 PM
#9
Senior Member
Join Date: Mar 2006
Location: New York
Posts: 1,945
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by daz-o-matic
General consensus here is for the Topeak Road Morph. I don't have one yet, but it's on my shopping list.
Not a true "frame pump" like the long ones that hold themselves under your top tube, but there are several mounting options; a search of BF will reveal them all...
Not a true "frame pump" like the long ones that hold themselves under your top tube, but there are several mounting options; a search of BF will reveal them all...
I've gotten mine (by mistake) to 140psi.
06-06-07, 12:29 PM
#10
Erect member since 1953
Join Date: Dec 2006
Location: Antioch, CA (SF Bay Area)
Posts: 7,000
Bikes: Trek 520 Grando, Roubaix Expert, Motobecane Ti Century Elite turned commuter, Some old French thing gone fixie
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 121 Post(s)
Likes: 0
Liked 38 Times
in
21 Posts
Originally Posted by daz-o-matic
General consensus here is for the Topeak Road Morph. I don't have one yet, but it's on my shopping list.
Not a true "frame pump" like the long ones that hold themselves under your top tube, but there are several mounting options; a search of BF will reveal them all...
Not a true "frame pump" like the long ones that hold themselves under your top tube, but there are several mounting options; a search of BF will reveal them all...
I like the one with the gauge. You'll want a third party mount -- cheap at Performance.
Downside: On group rides everyone, even with a pump, will want to borrow yours when they flat.
06-06-07, 12:31 PM
#11
Whateverthehell
Join Date: Dec 2004
Location: U.S.S.A.
Posts: 7,432
Bikes: '06 Blue Competition RC5AL w/ritchey pro fork, spinergy stealth PBO, etc.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Cassave
Zefal HPX
there's a reason why this pump is still being made over 20 years after its debut.
__________________
"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return." - Leonardo daVinci
"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return." - Leonardo daVinci
06-06-07, 12:43 PM
#12
hello
I'm pretty happy with my Blackburn frame pump. I need another pump to fit a slightly longer frame so I might go with the Zefal.
06-06-07, 12:44 PM
#13
Making a kilometer blurry
Originally Posted by Chucklehead
totally.
there's a reason why this pump is still being made over 20 years after its debut.
there's a reason why this pump is still being made over 20 years after its debut.
06-06-07, 12:52 PM
#14
*
Join Date: Jan 2007
Posts: 3,458
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Originally Posted by waterrockets
Yep, and I still use my first one, purchased 16 years ago...
Some of the older ones pump to "only" 135 psi. The new ones go to 160. Pumps up HP tubulars real nice.
Last edited by vpiuva; 06-07-07 at 06:54 AM.
06-06-07, 03:04 PM
#15
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
I've had a Zefal for years. Very satisfied, except the shaft bent when I whacked a dog on the snout a few months ago. (Isn't that what pumps are for ?) I bent it back, and it still works. I bought a Blackburn for my new bike & like that too.
06-06-07, 04:54 PM
#17
Bike Junkie
Join Date: Mar 2005
Location: Santa Clara, CA
Posts: 1,620
Bikes: 2013 Orange Brompton M3L; 2006 Milwaukee Bicycle Co. Fixie (Eddy Orange); 2022 Surly Cross Check, Black
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Likes: 0
Liked 7 Times
in
1 Post
Anything that can withstand being thrust into the spokes of another cyclist going 40+ mph. Heck you'll eventually need to do that some time in your life...
06-06-07, 05:54 PM
#18
Senior Member
Join Date: Jun 2007
Posts: 80
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Zephal HP.
Going fast, went airborne at a dip in an old covered bridge. The bike came down hard. The pump flew out, got run over by the cager that was following too closely for too long (but would not pass). The pump is back in service. A bench vise got it close to round again, and it still works great.
Going fast, went airborne at a dip in an old covered bridge. The bike came down hard. The pump flew out, got run over by the cager that was following too closely for too long (but would not pass). The pump is back in service. A bench vise got it close to round again, and it still works great.
06-06-07, 06:07 PM
#19
Senior Member
Join Date: May 2007
Location: Vista, CA
Posts: 153
Bikes: 2006 Trek Madone 5.2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I like the Performance Hurricane MiniMax pump. Like the Topeak Road Morph, it has a detachable head with a hose and you can use it as a small floor pump. It's easy to get over 100psi with it. When it's on sales it's about half the price of the Topeak and the hose is stored internally instead of externally.
Hurrican MiniMax Pump
Hurrican MiniMax Pump
06-06-07, 07:10 PM
#20
Senior Member
Join Date: Dec 2003
Posts: 3,333
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Topeak Micro Carbon for me, I love 'em.
06-06-07, 08:31 PM
#21
well hello there
Join Date: May 2005
Location: Point Loma, CA
Posts: 15,430
Bikes: Bill Holland (Road-Ti), Fuji Roubaix Pro (back-up), Bike Friday (folder), Co-Motion (tandem) & Trek 750 (hybrid)
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 503 Post(s)
Liked 336 Times
in
206 Posts
I don't know the zefal HPX, but the road morph can easily crank a tire up to 100 psi. A blackburn frame pump can not.
__________________
.
.
Two wheels good. Four wheels bad.
.
.
Two wheels good. Four wheels bad.
06-06-07, 10:17 PM
#22
Making a kilometer blurry
Originally Posted by Nachoman
I don't know the zefal HPX, but the road morph can easily crank a tire up to 100 psi. A blackburn frame pump can not.
06-06-07, 10:54 PM
#24
well hello there
Join Date: May 2005
Location: Point Loma, CA
Posts: 15,430
Bikes: Bill Holland (Road-Ti), Fuji Roubaix Pro (back-up), Bike Friday (folder), Co-Motion (tandem) & Trek 750 (hybrid)
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 503 Post(s)
Liked 336 Times
in
206 Posts
Originally Posted by waterrockets
I've had to release air after inflating with my Zefal. I guess I thought all pumps could get well over 100psi, so the Blackburn failure is surprising to me. They use o-rings on the plunger though, right? Horrible frame pump design right there. The rubber cup is the way to go.
__________________
.
.
Two wheels good. Four wheels bad.
.
.
Two wheels good. Four wheels bad.