Cogs compatibility
01-25-09, 10:02 AM
#1
Senior Member
Thread Starter
Join Date: May 2008
Location: Toronto
Posts: 494
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 0 Times
in
0 Posts
Cogs compatibility
Are cogs on Shimano single speed freewheel compatible with Campagnolo and SRAM chains?
01-25-09, 04:09 PM
#2
Senior Member
If the single-speed freewheel is for chains that are 3/32th inch wide, then you should be able to use all types of chains, even chains that 1/8th inch wide.
The critical factor is the pitch, and that is constant for all bicycle chains at half an inch.
However, if the freewheel is designed only for use with chains 1/8th inch wide, then you are limited to 1/8th inch chains. If you try to use 3/32nd width chains, you will find the teeth are too wide for them, and won't engage properly.
You've posted an SS/FG question in the Road forum, so it's a wonder you haven't been flamed like the guy yesterday. Lucky you!
The critical factor is the pitch, and that is constant for all bicycle chains at half an inch.
However, if the freewheel is designed only for use with chains 1/8th inch wide, then you are limited to 1/8th inch chains. If you try to use 3/32nd width chains, you will find the teeth are too wide for them, and won't engage properly.
You've posted an SS/FG question in the Road forum, so it's a wonder you haven't been flamed like the guy yesterday. Lucky you!
