Dedicated cassett or swap?
#1
BikeJunky
Thread Starter
Join Date: Jan 2004
Location: People's Republic of Bikeopolis
Posts: 171
Bikes: Santa Cruz Superlight, Redline Proline 24, Felt F45, Fuji Cross Pro, Specalized M2 Stumpjumper, Surly CrossCheck, Atala track
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Dedicated cassett or swap?
I have new set of Williams 30s on the way. I will use these for fast hilly group ride and climbing. I would like to put a dedicated 12-26 cassette (53 39 upfront) and Conti GP 4000S on the Williams and just swap wheels. Anyone else using a dedicated cassette on each wheelset or are you swapping the same cassette?
#2
road plague
Join Date: Apr 2009
Location: dropped in dc
Posts: 343
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Funny, my Sys30's should be here Monday and I bought a dedicated cassette. This is my first "extra" wheelset, I bought an Ultegra 6600 (same as current) 12-27 for $65 shipped and Pro3's (I run 4000S's on my other wheels).
#3
I eat carbide.
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
It's much easier having at least one cassette for every wheelset you plan on using regularly.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
#4
Senior Member
I run dedicated cassettes. Also tires/tubes. I swap a couple QR skewers because I have only two trainer (rear) skewers and two sets of "nice" reliable use-friendly skewers (Campy aluminum ended ones).
cdr
#5
Carpe Diem
Join Date: Sep 2006
Location: MABRA
Posts: 13,149
Bikes: 2007 CAAD9; 2014 CAADX; PedalForce CG1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
+2
__________________
"When you are chewing the bars at the business end of a 90 mile road race you really dont care what gear you have hanging from your bike so long as it works."
ΛΧΑ ΔΞ179 - 15% off your first Hammer Nutrition order!
"When you are chewing the bars at the business end of a 90 mile road race you really dont care what gear you have hanging from your bike so long as it works."
ΛΧΑ ΔΞ179 - 15% off your first Hammer Nutrition order!
#6
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,294
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1441 Post(s)
Liked 709 Times
in
363 Posts
It really does make wheel swaps a lot easier. In the long run, it's no more expensive either. Given that you're going to have to replace cassettes as they wear anyway. (i.e. 2 cassettes every 10000 miles is the same cost as one cassette every 5000 miles)
And if you race, you have to have 2 cassettes to use one set of wheels in the wheel pit, or wheel truck.
And if you race, you have to have 2 cassettes to use one set of wheels in the wheel pit, or wheel truck.
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
#7
goodspeed
Join Date: Apr 2007
Location: NY
Posts: 137
Bikes: Cervelo Team Soloist
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What about differing chain and cassette wear? Wouldn't that cause the chain to skip on say a newer(race only miles) cassette with less wear?
#8
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,294
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1441 Post(s)
Liked 709 Times
in
363 Posts
If you replace your chain when you're suppose to it, it's not a problem. if you put a new cassette with a chain worn past spec, it will be a problem.
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
#9
Senior Member
Both. I have cassettes for all my rear wheels, but I also swap in accordance to my needs, i.e., I have a mix of 11-23, 12-23, and 12-25 cassettes I like to use for various rides. If you race, I'd recommend at least two complete wheelsets and cassettes to go on both; the extra for the wheel car or pit.
__________________
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
Cat 2 Track, Cat 3 Road.
"If you’re new enough [to racing] that you would ask such question, then i would hazard a guess that if you just made up a workout that sounded hard to do, and did it, you’d probably get faster." --the tiniest sprinter
#10
Senior Member
The best situation would be matched chains and cassettes and easy to do with master links on the chain.
#11
Senior Member
I finally rode enough to run into a problem with worn chains and cassettes.
With 8s I had a lot of gear and it didn't matter if something wore out, I had replacements. It helped that I had a lot of individual cogs, so I could replace just the 19T, for example. Cassettes were all separate and I had a few that I could cannibalize for cogs. This was back in the primitive days - I even have an 8s freewheel for my now-gone disk wheel. The only cogs I wore out that I regret wearing out were some aluminum Campy cassettes. They were light!
With 9s I simply didn't ride enough to wear out the 4 or so cassettes I had. I got a new frame a couple times and only changed chains then (one of my 9s speed frames still has the chain on it). I think I went through 4 chains on my 9s stuff, maybe one or two more. I only used one set of shifters and one rear derailleur, so I don't think it was too many.
With 10s I got onto my 6th or 7th chain (1 chain on one frame, 1 chain on another, 2 chains on the 3rd, and the second chain on the 4th bike) and suddenly all the good cassettes I had were bad. They skipped pretty readily on most of the middle cogs. This applied to three different cassettes, all of them a Ti/Steel setup. I had to replace them (the other cassettes were on wheels I rarely used so they were still fine). Cost a bundle. Now I'm good again, but I compromised on gearing for my main training cassette (I took a perfectly fine 12-25 off and just stuck it in my toolbox because I generally run 11-23 or 11-25, but now I have that 12-25 in use). I also went all steel with the other cassettes.
cdr
With 8s I had a lot of gear and it didn't matter if something wore out, I had replacements. It helped that I had a lot of individual cogs, so I could replace just the 19T, for example. Cassettes were all separate and I had a few that I could cannibalize for cogs. This was back in the primitive days - I even have an 8s freewheel for my now-gone disk wheel. The only cogs I wore out that I regret wearing out were some aluminum Campy cassettes. They were light!
With 9s I simply didn't ride enough to wear out the 4 or so cassettes I had. I got a new frame a couple times and only changed chains then (one of my 9s speed frames still has the chain on it). I think I went through 4 chains on my 9s stuff, maybe one or two more. I only used one set of shifters and one rear derailleur, so I don't think it was too many.
With 10s I got onto my 6th or 7th chain (1 chain on one frame, 1 chain on another, 2 chains on the 3rd, and the second chain on the 4th bike) and suddenly all the good cassettes I had were bad. They skipped pretty readily on most of the middle cogs. This applied to three different cassettes, all of them a Ti/Steel setup. I had to replace them (the other cassettes were on wheels I rarely used so they were still fine). Cost a bundle. Now I'm good again, but I compromised on gearing for my main training cassette (I took a perfectly fine 12-25 off and just stuck it in my toolbox because I generally run 11-23 or 11-25, but now I have that 12-25 in use). I also went all steel with the other cassettes.
cdr