Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Compatible upgrade components for my bike?

Search
Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

Compatible upgrade components for my bike?

Thread Tools
 
Search this Thread
 
Old 08-25-09, 01:31 PM
  #1  
Ridah!
Thread Starter
 
Join Date: Sep 2004
Location: Bethesda, MD
Posts: 28

Bikes: 2005 KHS Flite 900, 2008 Leader 735TT (in build)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Compatible upgrade components for my bike?

I have an 05 KHS Flite 900 with the stock Campy Veloce setup on it. I've been thinking about upgrading to some new bits, specifically the crank, both derailleurs and levers. Is there a limit on what Campy parts I can put on the bike, year-wise or otherwise?

Thanks!
strykerhorse is offline  
Old 08-25-09, 01:47 PM
  #2  
Senior Member
 
clausen's Avatar
 
Join Date: Oct 2004
Location: Northern Ontario
Posts: 3,659

Bikes: Colnago Master XL, Bianchi Via Nirone 7, Marinoni Fango

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Most 10 spd Campagnolo parts are interchangeable. There are few combination that will not work with out modification. A newer ultra torque crank will need the new BB, since you have a square taper BB. The only difference is the material used, making it lighter as you go up the group sets. If your thinking of upgrading allot of components look at a complete group set and then you can go 11spd.
clausen is offline  
Old 08-25-09, 01:58 PM
  #3  
Senior Member
 
Join Date: Aug 2007
Posts: 187
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I am not an expert on such things, however if you have the Veloce triple you can upgrade to nearly any campy crankset. I assume if you want to upgrade the crankset your probably not interested in keeping a triple crankset. I can't speak concerning the new 11 speeds but many websites have 09 or older Centuar, Chorus and Record cranksets reasonably priced (for campy) in both the traditional 53/39 or compact 50/34. I believe the Veloce triple had the square taper botton bracket and the newer doubles were the ultra torque in which the bottom bracket was integral to the crankset. The weight savings for replacing the crankset could be 1- 1 1/2 lbs. I am not convinced of the advantage of replacing the ergo shifters unless your ungrading to an 11 speed groupo (in which you'll probably be replacing everything). My understanding is that the pre 2007 campy shifters worked pretty much the same, it was merely the materials which were different and primarily affected weight(ounces) more than performance. The lower cost newer campy shifters I understand do work differently than the Chorus/Record line. Again I am not sure replacing the front derailler would give you any performance advantage and I can't speak to the rear derailler especially if your not replacing your cassette. I own a 2002 Bianchi Eros which came with the Mirage Triple. I replaced it in 07 with a Centaur compact double and have been happy.
ndbiker is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.