S22
#1
I eat carbide.
Thread Starter
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
S22
I'm sure people have been discussing it out here, but I am not out here much right now. Wanted to pass along that I am seeing industry people traveling right now to what appears to be something involving SRAM and S22 or the 11 spd group Caley wrote about at Velo and leaks being heard throughout the industry.
If what I am seeing is even remotely true then expect an announcement in the not too distant future. These are usually events to allow press to get the company speech and take photos, etc so their articles are ready when the stuff is officially announced.
Fwiw - I'd like to go on record to say that as of right now I am REALLY not very pro 11....but then again I'm just a wheel builder.
If what I am seeing is even remotely true then expect an announcement in the not too distant future. These are usually events to allow press to get the company speech and take photos, etc so their articles are ready when the stuff is officially announced.
Fwiw - I'd like to go on record to say that as of right now I am REALLY not very pro 11....but then again I'm just a wheel builder.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
#2
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
Bah. I'm finally coming to accept 10 speed.
#3
serious cyclist
Join Date: Apr 2009
Location: Austin
Posts: 21,147
Bikes: S1, R2, P2
Mentioned: 115 Post(s)
Tagged: 1 Thread(s)
Quoted: 9334 Post(s)
Liked 3,679 Times
in
2,026 Posts
Worst-kept secret ever?
#4
I eat carbide.
Thread Starter
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
#5
Administrator
Join Date: Feb 2005
Location: Delaware shore
Posts: 13,557
Bikes: Cervelo C5, Guru Photon, Waterford, Specialized CX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Liked 2,171 Times
in
1,462 Posts
DA turned out much better than most expected so S22 needs to be a good bit lighter and much cheaper to sell
#7
I eat carbide.
Thread Starter
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
SRAM seems to have been raising prices substantially with each revision as though they have gained enough market share to feel comfortable moving up from where they had to come in at to gain market share.
I'm not sure they fully realize that if they get too close to Shimano pricing there will be a substantial exodus back.
I'm not sure they fully realize that if they get too close to Shimano pricing there will be a substantial exodus back.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
#8
serious cyclist
Join Date: Apr 2009
Location: Austin
Posts: 21,147
Bikes: S1, R2, P2
Mentioned: 115 Post(s)
Tagged: 1 Thread(s)
Quoted: 9334 Post(s)
Liked 3,679 Times
in
2,026 Posts
They're hoping to compete on even footing with Shimano, of course. Now, if they can bring electronic shifting in at a price to undercut Shimano...
#9
I eat carbide.
Thread Starter
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
+1- we can dream.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
#10
Semper Fi
Join Date: Jan 2008
Posts: 12,942
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1172 Post(s)
Liked 358 Times
in
241 Posts
Let the 22 come on out, I can hope for some good pricing on a Force or Red/Black grouppo to upgrade from Rival. I like the Rival just fine and if I could find either upper level group at a great price I'd grab one and install it. As far as having I cannot say I needed 20, I was fine back at 10 and then 14 for a long time. I suppose I'll be riding C&V soon since the cogsets get larger and disk brakes are looming over me. I'm an old guy and too set in my ways flame me now and get it over with.
Bill
Bill
__________________
Semper Fi, USMC, 1975-1977
I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13
Semper Fi, USMC, 1975-1977
I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13
#11
Senior Member
SRAM seems to have been raising prices substantially with each revision as though they have gained enough market share to feel comfortable moving up from where they had to come in at to gain market share.
I'm not sure they fully realize that if they get too close to Shimano pricing there will be a substantial exodus back.
I'm not sure they fully realize that if they get too close to Shimano pricing there will be a substantial exodus back.
#12
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Mentioned: 109 Post(s)
Tagged: 1 Thread(s)
Quoted: 6556 Post(s)
Likes: 0
Liked 58 Times
in
36 Posts
+1 I became a SRAMophile, transitioning over from a single Campy bike and numerous Shimano bikes, in large part due to the affordability and value. In my estimation, SRAM Force has had the best bang for the buck for a number of years now. If prices continue to rise so sharply, SRAM may begin to discourage some of us loyal devotees.
#13
Senior Member
Join Date: Dec 2012
Location: Missouri
Posts: 662
Bikes: '12 CAAD10 3, '88 Raleigh Talon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
As long as SRAM stays cheaper and retains its performance and low weight, I believe it'll be alright.
It is frustrating getting a new bike and then finding out most everything is going to 11-speed. The prospect of buying a cyclocross bike in a year with low-end SRAM and not having any upgrade options is disappointing. Not sure if I should wait the 11-speed switch, or proceed with the purchase at this point.
I'd just really like to give SRAM a go, but I can't seem to find a good point to jump on board.
It is frustrating getting a new bike and then finding out most everything is going to 11-speed. The prospect of buying a cyclocross bike in a year with low-end SRAM and not having any upgrade options is disappointing. Not sure if I should wait the 11-speed switch, or proceed with the purchase at this point.
I'd just really like to give SRAM a go, but I can't seem to find a good point to jump on board.
#14
serious cyclist
Join Date: Apr 2009
Location: Austin
Posts: 21,147
Bikes: S1, R2, P2
Mentioned: 115 Post(s)
Tagged: 1 Thread(s)
Quoted: 9334 Post(s)
Liked 3,679 Times
in
2,026 Posts
As long as SRAM stays cheaper and retains its performance and low weight, I believe it'll be alright.
It is frustrating getting a new bike and then finding out most everything is going to 11-speed. The prospect of buying a cyclocross bike in a year with low-end SRAM and not having any upgrade options is disappointing. Not sure if I should wait the 11-speed switch, or proceed with the purchase at this point.
I'd just really like to give SRAM a go, but I can't seem to find a good point to jump on board.
It is frustrating getting a new bike and then finding out most everything is going to 11-speed. The prospect of buying a cyclocross bike in a year with low-end SRAM and not having any upgrade options is disappointing. Not sure if I should wait the 11-speed switch, or proceed with the purchase at this point.
I'd just really like to give SRAM a go, but I can't seem to find a good point to jump on board.
#15
Senior Member
I have it in my head that soon enough there will be a switch to 135mm OLD with road disc and 11/12sp hubs. I might have enough 10 wheels, cassettes and chains to make it until then right now so I'm going to avoid 11 like the plague as long as possible.
#16
Senior Member
IMO, 11 cogs is ludicrous. To retrogrouch a bit: ~25 years ago, I used to ride very hilly rides with a 6 speed cluster (New England). It wasn't great but it worked fine. 7 was better. I saved up lawnmowing money and moved to 8 with with DA 7402. 8 was perhaps an ideal compromise of gear ratio availability, ease of setup and cassette durability. 9 and 10 speed didn't really add anything and resulted in extremely thin cogs, skinny fast wearing chains and crammed-in clearances. For people like me who live in very flat areas (moved to Midwest) and rarely leave the big ring, I'd argue more than 8 cogs is just not needed.
Now, at best, if we want the latest groups we all need to replace our cassette bodies and potentially redish wheels to jam in a completely superfluous 11th cog. It won't even work with certain wheels and frames. The 9070 cogs are now razor sharp, tinny flakes of ruinously expensive metal that will probably wear out every 3-4K miles. Older 8 speed cassettes and chains wore forever by comparison and weren't any heavier. What is the point? It might make some sense on 1X MTB setups, but for a standard 2X road setup I don't get it.
Edit: just noticed this thread is attracting all of us fogeys. Sorry.
Now, at best, if we want the latest groups we all need to replace our cassette bodies and potentially redish wheels to jam in a completely superfluous 11th cog. It won't even work with certain wheels and frames. The 9070 cogs are now razor sharp, tinny flakes of ruinously expensive metal that will probably wear out every 3-4K miles. Older 8 speed cassettes and chains wore forever by comparison and weren't any heavier. What is the point? It might make some sense on 1X MTB setups, but for a standard 2X road setup I don't get it.
Edit: just noticed this thread is attracting all of us fogeys. Sorry.
Last edited by Hiro11; 04-12-13 at 08:08 AM.
#17
Senior Member
Join Date: Jul 2007
Posts: 7,569
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 678 Times
in
429 Posts
Bah. I just got the new Red a few months ago. I have no interest in upgrading again. Why did they even bother with this current Red revision if it was just going to be replaced within a year.
#18
I eat carbide.
Thread Starter
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
After being in the pits at natz and at worlds.....it has its use in cross.....
....but this isn't cross.
On the road it is just not needed and is a "me too" product.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
#19
Senior Member
Join Date: Jul 2007
Posts: 7,569
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 678 Times
in
429 Posts
There are photos of the new groupset on the WW forum. The cranks, and derailleurs and mechanical shifters and brakes, look unchanged, though I am sure the internals of the shifters are different.
#20
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
+1 I became a SRAMophile, transitioning over from a single Campy bike and numerous Shimano bikes, in large part due to the affordability and value. In my estimation, SRAM Force has had the best bang for the buck for a number of years now. If prices continue to rise so sharply, SRAM may begin to discourage some of us loyal devotees.
#21
Senior Member
I have a mostly Red group that is several years old now. I was able to get a good deal through SRAM's "grassroots racing" promotion. It's been on two different bikes and has treated me well. But is there any functional advantage to getting Red over Force, or even Rival? I see some pretty good deals on complete bikes with Rival and was wondering if any Rival users could comment.
I'm a Rival user, I have it (or at least mostly Rival) on 3 bikes. I came from Dura-Ace, and bought an original Rival silver group because I wanted to try Sram and thought it would look good on my Waterford. I liked it, although I agree with the stereotypes: it's loud, the front shifting is finicky and the chains don't last that long.
But I liked it well enough that I bought a second group and put it on my cheap aluminum race bike. Due to my buying a 'group in a box' that came with the wrong deraileur I had to buy one at the LBS and they only had Shimano. But for me, a Tiagra FD works fine with Sram and cleans up most of the Sram front shifting woes, and that is still with a silver (non-zero loss) shifter.
This winter I built up a Argon 18 Krypton frame and again stuck with mostly 2012 Rival (shifters, brakes, RD) but subbed in a Force crank (2010 model so the 'weave' look would match the 2012 Rival shifters), Ultegra cassette (wanted 12-23t) and FD ('cuz it works better) and a KMC chain (I like the quick-link). So far I couldn't be happier. Between the Zero-Loss front shifter and Shimano FD I like the front shifting as well as anything. And before I bought any parts I test road everything, including Red with a Yaw FD. Personally, I think the upper end Sram stuff looks cheesy but I wanted to see if it offered a clear advantage. I didn't think it did, so I stuck with I liked.
#22
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
That's really good info. I have subbed out the Red (pre-Yaw) FD. It was the flexy titanium one and switching to Force was a good swap. I also prefer Ultegra cassettes and KMC chains.
I guess I don't see why someone would get Force brifters, though.
I guess I don't see why someone would get Force brifters, though.
#23
Senior Member
Me either. It seems as if Sram is getting closer to the Shimano model where the top group stands out and the next 3 have a lot of over lap.
#24
OM boy
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,355
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 507 Post(s)
Liked 634 Times
in
432 Posts
IMO, 11 cogs is ludicrous. To retrogrouch a bit: ~25 years ago, I used to ride very hilly rides with a 6 speed cluster (New England). It wasn't great but it worked fine. 7 was better. I saved up lawnmowing money and moved to 8 with with DA 7402. 8 was perhaps an ideal compromise of gear ratio availability, ease of setup and cassette durability. 9 and 10 speed didn't really add anything and resulted in extremely thin cogs, skinny fast wearing chains and crammed-in clearances. For people like me who live in very flat areas (moved to Midwest) and rarely leave the big ring, I'd argue more than 8 cogs is just not needed.
Now, at best, if we want the latest groups we all need to replace our cassette bodies and potentially redish wheels to jam in a completely superfluous 11th cog. It won't even work with certain wheels and frames. The 9070 cogs are now razor sharp, tinny flakes of ruinously expensive metal that will probably wear out every 3-4K miles. Older 8 speed cassettes and chains wore forever by comparison and weren't any heavier. What is the point? It might make some sense on 1X MTB setups, but for a standard 2X road setup I don't get it.
Edit: just noticed this thread is attracting all of us fogeys. Sorry.
Now, at best, if we want the latest groups we all need to replace our cassette bodies and potentially redish wheels to jam in a completely superfluous 11th cog. It won't even work with certain wheels and frames. The 9070 cogs are now razor sharp, tinny flakes of ruinously expensive metal that will probably wear out every 3-4K miles. Older 8 speed cassettes and chains wore forever by comparison and weren't any heavier. What is the point? It might make some sense on 1X MTB setups, but for a standard 2X road setup I don't get it.
Edit: just noticed this thread is attracting all of us fogeys. Sorry.
I useta have that affliction, until I tried 10 spd - it has been the '**** that kills' !
and if 11 spd shifts as well and gives me back my 18 in a 12-26 (or 27) spread, then I'm all for it.
I don;t think that 8 spd or 9 spd cogs wear much better - if you change the chain before it stretches too much...
and it's prolly gonna fit the current spread... so whatz the big deal? special chain ? cost a bit more?
I'm open to new '**** that kills'
#25
serious cyclist
Join Date: Apr 2009
Location: Austin
Posts: 21,147
Bikes: S1, R2, P2
Mentioned: 115 Post(s)
Tagged: 1 Thread(s)
Quoted: 9334 Post(s)
Liked 3,679 Times
in
2,026 Posts
Meh...gotta disagree there. 1x11 for cross is the future. It's the only use I can currently see for 11. The SRAM xx1 driver and chainring setup make it an ideal cross setup. You get to ditch a front d, shifter, chain guard, and still maintain a wide range on the cassette. Less things to freeze up in the mud.
After being in the pits at natz and at worlds.....it has its use in cross.....
....but this isn't cross.
On the road it is just not needed and is a "me too" product.
After being in the pits at natz and at worlds.....it has its use in cross.....
....but this isn't cross.
On the road it is just not needed and is a "me too" product.