Adjusted Shimano Ultegra 6800 front/rear derailleurs. Anything to double check?
Adjusted front and rear derailleurs. Both were a smidge off. Was rubbing chain a bit in back when on the fifth smallest cog and rubbing the derailleur a bit in the front when in the largest on the front smallest on the back.
Fixed the rear with the barrel adjustment on the derailleur and the front needed it's cable tightened a smidge. Working beautifully on the stand now I just gotta put some power on it and see how it handles. I checked and adjusted the high and low limits as they were also a little off. I have my multi tool with me so I can make fine adjustments to the high and low limits if I have issues getting into top or bottom gears.
I set the upper and lower limits a little conservatively to avoid throwing a chain as I can always loosen them up a bit if it's too tight but if it's too loose I could toss the chain.
Any suggestions of things I should check for or double check to be sure? I've not adjusted such nice derailleurs before. Overall the process was pretty easy but I'm just concerned my inexperience may cause me to overlook something important.