What gearing do you use on your climbing bike?
#1
Senior Member
Thread Starter
Join Date: Feb 2014
Location: Central Coast, California
Posts: 613
Bikes: Niner RLT 9 4 Star, Kona Splice, Nashbar Carbon road bike
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What gearing do you use on your climbing bike?
I got my first road bike a few months ago and it has a compact crank 50-34 with a 12-25 cassette. I find doing any kind of extended climbing exceedingly difficult and more like weight lifting than cycling in the 34-25 gear combo.
I know I need to get a new cassette and I was wondering what the "norm" is for climbing bikes. I've got a 105 short cage RD that will accept a 28t cassette, will this make a big difference? Do I need to get a long cage RD and go with a 30 or 32T cassette?
What do you guys run?
Thanks
I know I need to get a new cassette and I was wondering what the "norm" is for climbing bikes. I've got a 105 short cage RD that will accept a 28t cassette, will this make a big difference? Do I need to get a long cage RD and go with a 30 or 32T cassette?
What do you guys run?
Thanks
#2
Banned
Join Date: Jan 2006
Location: take your time, enjoy the scenery, it will be there when you get to it
Posts: 7,281
Bikes: 07 IRO BFGB fixed-gear, 07 Pedal Force RS
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
50-39 with 12-23(10spd)on one bike, and 50-34 with 12-25(11spd)on the other bike.
Btw, what I run is meaningless to you. For the last 8 years I've been riding 12-15k miles a year, so our fitness level is probably going to be different.
Btw, what I run is meaningless to you. For the last 8 years I've been riding 12-15k miles a year, so our fitness level is probably going to be different.
Last edited by BoSoxYacht; 07-18-14 at 09:10 AM.
#3
Senior Member
Join Date: Feb 2014
Location: Cabot, Arkansas
Posts: 1,538
Bikes: Lynskey Twisted Helix Di2 Ti, 1987 Orbea steel single speed/fixie, Orbea Avant M30, Trek Fuel EX9.8 29, Trek Madone 5 series, Specialized Epic Carbon Comp 29er, Trek 7.1F
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I just switched from a triple 50/39/30 with a 11-28 to a lighter bike with a 50/34 11-28. There is a little difference but not much. I am going to start some hill repeats to take care of losing the lower gear.
#6
Senior Member
Join Date: Dec 2012
Location: Missouri
Posts: 662
Bikes: '12 CAAD10 3, '88 Raleigh Talon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
50/34 up front. 11-25 or 12-25 out rear - depending on which wheels I'm on.
That's the gearing for my flat bike, hill bike, and wind bike. I only have one bike though....
That's the gearing for my flat bike, hill bike, and wind bike. I only have one bike though....
#9
Senior Member
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
As was pointed out there really isn't a "norm" for climbing gearing since it depends on the rider... and also the climbs themselves. Going from 25 to 28 is definitely a noticeable difference... is it enough for you? I have no idea. I went from an 11-26 to an 11-28 before doing a huge climbing ride and I was very thankful I did... i could have done it with the 26 but the 28 was enough to make it more enjoyable for me.
Do you know what cadence are you going on these climbs? Are you having to stand out of the saddle for extended periods to get up them or are you just mashing your way up?
You can input the gears into this calculator to give you an idea of the change you'll see Bicycle Bike Gear Ratio Speed and Cadence Calculator
Basically for a given speed you're looking at around a difference of 10 rpm's going from a 25 to a 28 and 15 rpm's going from 25 to 30.
Do you know what cadence are you going on these climbs? Are you having to stand out of the saddle for extended periods to get up them or are you just mashing your way up?
You can input the gears into this calculator to give you an idea of the change you'll see Bicycle Bike Gear Ratio Speed and Cadence Calculator
Basically for a given speed you're looking at around a difference of 10 rpm's going from a 25 to a 28 and 15 rpm's going from 25 to 30.
#10
Senior Member
Maybe the OP has a support car that follows them around and has a climbing bike ready for when the double-digit grades show up.
The gearing is all about fitness. I've been smoked many times by people pushing much bigger gears than myself, I as reach for a granny gear.
The gearing is all about fitness. I've been smoked many times by people pushing much bigger gears than myself, I as reach for a granny gear.
#11
SuperGimp
having said that, I have one wheel with a 11-32 and that thing is divine when the roads get really steep. My "normal" climbing cassette is 11-28 and yes, it makes a difference over 11-26 even, even if it's just a slight difference. I have a compact up front and the appropriate RD to accommodate 32 teeth.
#12
Certifiably crazy!
Join Date: Jun 2011
Location: San Diego, CA
Posts: 503
Bikes: Felt Z5, Edict 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I only have one road bike, it has a 50/34 crank with 11-28 cassette. I climb most stuff in the 24, but I also do a lot of miles on a mountain bike on trails with lots of climbing, so that helps. My mtb runs is a 1x10 running a 32 ring with an 11-36 cassette, I try to stay away from the 36 and only use it as a bailout gear.
Last edited by Carloswithac; 07-18-14 at 01:03 PM.
#13
just another gosling
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,528
Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3886 Post(s)
Liked 1,938 Times
in
1,383 Posts
Yes, a climbing bike. Why not? I have a triple with a lowest gear of 26 X 27. The good thing about a triple like that is that an ordinary road RD works fine. If you occasionally ride 100'/mile, a climbing bike is a good thing.
Our tandem goes down to 26 X 34. We use an XTR RD. Works for either 9 or 10 speed.
Our tandem goes down to 26 X 34. We use an XTR RD. Works for either 9 or 10 speed.
#14
Farmer tan
In the mountains, flats, whatever... 53/39 in front, 12/25 rear.
I enjoy standing and low cadence climbing. Everyone's different.
I enjoy standing and low cadence climbing. Everyone's different.
#15
Senior Member
Join Date: Jul 2013
Posts: 493
Bikes: 2013 SuperSix Ultegra
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
small crank-39 in the front and what ever gear/cog (12-25) in the back that keeps me around a cadence of 75-85
#16
Senior Member
Join Date: Apr 2007
Posts: 1,744
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Up to 120 miles, 12,000' I like either a 50/34 11-26 or a triple with a 30t granny with a 11-25 or 11-28 Ultegra cassette. A few weeks ago I did my big ride for the year, a double century with 200 miles, 21,000'. I had a Sram 11-28 rear with a compact. What I saved in grams on the bike in weight based on Sram vs Ultregra triple setup I more than paid for in gaps in gear inches that irked me for several hours.
#17
Senior Member
Thread Starter
Join Date: Feb 2014
Location: Central Coast, California
Posts: 613
Bikes: Niner RLT 9 4 Star, Kona Splice, Nashbar Carbon road bike
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the input guys. I understand fitness levels come into play. Google search Figueroa mountain, this is a few miles from my house. Its 3,900' of climbing over 9.5 m
#18
Zoom zoom zoom zoom bonk
Join Date: Sep 2006
Location: New Zealand
Posts: 4,624
Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 551 Post(s)
Liked 722 Times
in
366 Posts
28 will make a big difference. If you're managing those climbs with your 25 go for that.
30 even better. Check your derailleur specs to see if it will fit.
30 even better. Check your derailleur specs to see if it will fit.
#19
Senior Member
Join Date: Jul 2006
Location: Lebanon (Liberty Hill), CT
Posts: 8,473
Bikes: CAAD 12, MASI Gran Criterium S, Colnago World Cup CX & Guru steel
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1743 Post(s)
Liked 1,281 Times
in
740 Posts
For the past several years I have been using an 11x25 with a 50x34 crankset. Last week I changed out to a 12x27 because I rarely use the 11 and thought a 27 might make some climbs easier. But, my 12x25 worked fine for me.
#20
Senior Member
was using 50-34 w/ 12-29 for about 4-5 months.. 29 was bail out gear.. hardly ever used it, I think I could walk faster. Went to 12-27 and do my best not to use 27 now.. The cassette has a 25 which is used on most grade less then 10%. I was going up a mile long average 10% and was in the 27 and barely making ground on the old asian couple and a lady walking her dog. I had to laugh it myself. Average 10% my butt.. every time I looked at my garmin is was reading 14-15-16.
#21
Senior Member
Join Date: Apr 2013
Posts: 364
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have a compact as my only bike 50-34 and 12-25. That was good for most of my rides around here that average 1,000' climbing per 10 miles. It's a fairly standard ride in Marin. I ended up getting a 12-30 cassette for the Death Ride which was 130 miles 15,000'. It felt like my bail out gear had a bail out gear. It was great. I'm thinking about getting another set of wheels for the 12-30 so it'd be easier for me to switch back and forth.
#22
Full Member
I got my first road bike a few months ago and it has a compact crank 50-34 with a 12-25 cassette. I find doing any kind of extended climbing exceedingly difficult and more like weight lifting than cycling in the 34-25 gear combo.
I know I need to get a new cassette and I was wondering what the "norm" is for climbing bikes. I've got a 105 short cage RD that will accept a 28t cassette, will this make a big difference? Do I need to get a long cage RD and go with a 30 or 32T cassette?
What do you guys run?
Thanks
I know I need to get a new cassette and I was wondering what the "norm" is for climbing bikes. I've got a 105 short cage RD that will accept a 28t cassette, will this make a big difference? Do I need to get a long cage RD and go with a 30 or 32T cassette?
What do you guys run?
Thanks
Regards, Dick
#23
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
My climbing bike has 39/53 and 12-28. So does my long distance bike. And my short-course bike. You've probably figured it out.....I have one bike.
If you arent climbing mountains you could work with that compact and as said, go with a cassette that has a 28 granny. Otherwise, just ride a lot.
If you arent climbing mountains you could work with that compact and as said, go with a cassette that has a 28 granny. Otherwise, just ride a lot.
#24
Senior Member
I don't know about 32t, I am running a 12-30 right now with a 105 short cage and haven't yet had a problem in almost 800 miles.
#25
Junior Member
Join Date: Jul 2014
Location: Alameda CA, Davis CA
Posts: 19
Bikes: Giant TCR Advanced 2/ Rivendel Rambouillet
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I switched out my real derailer to a xtr long cage, lengthened the chain and use a 11-34 cassette with a double up front. Help much with climbing long grades on a compact.