Advertise on Bikeforums.net



Search:

Type: Posts; User: bikeman715; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 1.32 seconds.

  1. Replies
    15
    Views
    338

    so does that mean the L is for V brakes and the H...

    so does that mean the L is for V brakes and the H for canti's? yes .
  2. Replies
    14
    Views
    356

    Kool Stops are a good brand of bake pads .

    Kool Stops are a good brand of bake pads .
  3. If there a c-clip or the tap washer unscrew ...

    If there a c-clip or the tap washer unscrew holding the bolt to the derailleur , then remove it and then the bolt should drop out for replacement . in case you might need to drill out the bolt to...
  4. Replies
    3
    Views
    189

    They are fine . It steel after all . If it...

    They are fine . It steel after all . If it brother you fill in with body filler and paint . If not keep a eye on them for rust .
  5. I can't see why not . I use Shimano SORA STI ( 7...

    I can't see why not . I use Shimano SORA STI ( 7 spds ) on a Cannondale T 700 with Shimano XT derailleurs once and they all work together for many years . Maybe with the newer set ( 9 spds )...
  6. Replies
    18
    Views
    539

    I wouldn't brother . they are kids and most don't...

    I wouldn't brother . they are kids and most don't know what they doing . take it to a shop who does .
  7. Replies
    54
    Views
    1,314

    In most cases you just need to replace the axle ....

    In most cases you just need to replace the axle . The freewheel usually doesn't get damage from a bent axle . Even if you have to replace the wheel the cheap ones run about 40-50 dollars .
  8. Replies
    29
    Views
    445

    you can always file down any burrs or hooks on...

    you can always file down any burrs or hooks on the teeth so the chain doesn't get catch on them .
  9. Replies
    29
    Views
    445

    check to see if the chain ring(s) is /are bent ....

    check to see if the chain ring(s) is /are bent . if so they can be bent back with a adjustable wrench . make also sure the rings are tight to the spider and the arms are to the bottom becket . if...
  10. Replies
    29
    Views
    445

    the small ,small combo will be fine . that way I...

    the small ,small combo will be fine . that way I can tell if it too short .
  11. Replies
    29
    Views
    445

    A short chain doesn't cause chain suck . What...

    A short chain doesn't cause chain suck . What does cause chain suck is a front derailleur being out of adjustment . As far as your chain being too short ,you need to show a photo of your drive...
  12. You need to go to a older LBS and they might help...

    You need to go to a older LBS and they might help you out with replacement . if not then replace the axles too with new cones .
  13. Yes a 7 spd chain is a 7 spd chain , will work...

    Yes a 7 spd chain is a 7 spd chain , will work with any 7 ,6 ,5 spds drive train if it long enough . If it a use chain it will wear down the drivetrain faster compare to a new one .
  14. I think Bill is referring to the treads on the...

    I think Bill is referring to the treads on the bolt so it will screw into the axle to hold the tool .
  15. Replies
    5
    Views
    238

    adjust the cable ,using the adjustment somewhere...

    adjust the cable ,using the adjustment somewhere between the shifter and the derailleur .
  16. did they offer to look into new parts for you ?...

    did they offer to look into new parts for you ? they should have to look into it and tell you what your choices are .
  17. You should be able to get a harder elastomers (...

    You should be able to get a harder elastomers ( rubber ) and or stiffer spring at your LBS ,they should be able to order some from QBP . Most shops have a account with them .
  18. Replies
    33
    Views
    690

    You need to move the bracket out of the way ,...

    You need to move the bracket out of the way , then use a 5 or6 MM hex to loosen the bolt , you might need to give the seat a smack for it to loosen up , once it does then adjust the seat and...
  19. Replies
    11
    Views
    424

    There should be a 5 MM bolt at the bottom of the...

    There should be a 5 MM bolt at the bottom of the forks , remove it and the forks will come apart . Lay out the parts on a table in the order they come off and revere the order when putting them back...
  20. Replies
    33
    Views
    690

    +1

    +1
  21. You need this tool ,...

    You need this tool , http://www.parktool.com/product/crank-puller-for-splined-cranks-ccp-44 or this one ,...
  22. Not made anymore .

    Not made anymore .
  23. Replies
    11
    Views
    422

    +1

    +1
  24. There nothing wrong with your choice . As log you...

    There nothing wrong with your choice . As log you take care of the frame and fork , It should last you 20 -50 years . Yes the components will wear out with use and time ,so replace them then . The...
  25. Replies
    16
    Views
    476

    +1 sound like a plan .

    +1 sound like a plan .
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4