Advertise on Bikeforums.net



Search:

Type: Posts; User: operator; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 1.49 seconds.

  1. You may want to check that the OP has a fork that...

    You may want to check that the OP has a fork that you can punch the star nut out, and down. Or this is going to be pretty hilarious.
  2. It locks up because the freewheel is probably...

    It locks up because the freewheel is probably contacting the frame, check visually
  3. Replies
    14
    Views
    321

    It works extremely well. Its the only way to get...

    It works extremely well. Its the only way to get a non yaw sram group to shift the front properly.

    We've been selling this upgrade on old sram bikes which customers have had a lot of problem with...
  4. Replies
    12
    Views
    252

    The only thing this upgrade is going to...

    The only thing this upgrade is going to accomplish is moving a reliable, and well shifting bike to one that shifts like garbage (front). Well known issue with non yaw 10 speed sram groups. Don't do...
  5. 1) If that's a 68mm bb, there shouldn't be 2 x...

    1) If that's a 68mm bb, there shouldn't be 2 x spacers on the left side for a gxp bb regardless of what the manual says
    2) That ain't a track crank, it's a generic road crank marketed as such
  6. Replies
    21
    Views
    524

    Eggbeaters require maintenance, much more than a...

    Eggbeaters require maintenance, much more than a shimano pedal. And failure to maintain causes failures like pedal body flying off the spindles when riding. Not a good failure mode. AKA they suck.
  7. Replies
    1
    Views
    96

    Red 22 Hydro Rim Brake bleeding

    For those of you who have worked on the new Red 22 stuff, hydro with rim brakes. Is there supposed to be 1/2" to 3/4" deadzone in lever travel before the brake calipers start moving after a...
  8. Replies
    12
    Views
    305

    Those look like they weigh a **** ton.

    Those look like they weigh a **** ton.
  9. Replies
    16
    Views
    309

    I can think of all sorts of interpretations...

    I can think of all sorts of interpretations taking this quote out of context. Aw yeah
  10. Replies
    16
    Views
    342

    This is a $10-$15 job at your LBS.

    This is a $10-$15 job at your LBS.
  11. Thread: Bicycle Chain

    by operator
    Replies
    10
    Views
    336

    +1

    +1
  12. Replies
    3
    Views
    146

    Buy high quality wheels = problem solved.

    Buy high quality wheels = problem solved.
  13. Replies
    15
    Views
    428

    Or you can buy non crap chainring bolts e.g 5/6mm...

    Or you can buy non crap chainring bolts e.g 5/6mm sided chainring bolts. Or buy ones that have a knurled nut.
  14. Replies
    15
    Views
    428

    Are these AL or Steel bolts/nuts? If it's a...

    Are these AL or Steel bolts/nuts? If it's a commuter bike, I would antiseize especially if being ridden in wet/snow climates. Otherwise grease. Loctite and proper torque for AL bolts.
  15. Thanks man. I just worked doubly fast for the...

    Thanks man.

    I just worked doubly fast for the last 7 hours because my senior mechanic called in sick. So it's lunch time.
  16. Replies
    8
    Views
    223

    The solution is to cover the bikes. SRSLY?

    The solution is to cover the bikes. SRSLY?
  17. Replies
    14
    Views
    220

    Bianchi Canada imports 4 bikes out of the 5...

    Bianchi Canada imports 4 bikes out of the 5 billion Bianchi USA can get. Doesn't mean much.
  18. Replies
    20
    Views
    481

    I bet the OP is not using the correct tool, or is...

    I bet the OP is not using the correct tool, or is using the correct tool and is thinking it doesn't work right.

    BB30 is no less or more prone to noise than any traditional system. All contact...
  19. You don't do that when you run expensive ****....

    You don't do that when you run expensive ****. E.G Super record cassette = $460 and chain = $70. Rotating several chains in and out keeps everything almost at no wear. Do as you please though, for...
  20. You're lucky then. Spoke cutting machine =~ $3k....

    You're lucky then. Spoke cutting machine =~ $3k. Cost has to be recouped somehow.
  21. Replies
    10
    Views
    217

    Stainless steel can still rust.

    Stainless steel can still rust.
  22. Replies
    11
    Views
    237

    He'll need a new double specific front derailleur...

    He'll need a new double specific front derailleur as well.
  23. Replies
    18
    Views
    743

    +1 This guy know what he's talking about.

    +1

    This guy know what he's talking about.
  24. Replies
    9
    Views
    232

    Please don't do that. You think you're doing...

    Please don't do that.

    You think you're doing the shop mechanics a favor, but you're not. It's the opposite.
  25. Replies
    13
    Views
    168

    Wtf? There's no such thing as 'track racing...

    Wtf?

    There's no such thing as 'track racing specific hubs'. A track hub is a track hub. Both of those hubs axles can be replaced with longer versions to space out to im guessing is actally 126....
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4