ISO and For Trade thread parts 2 and 3.

[PDXaero]

Please dont hate me

Have:
Corsa Record 27.2 seatpost

Want:
modern carbon post under 200g, 27.2 with little offset

[ScottRyder]

I'm looking to trade a set of Spécialités TA Cyclotouriste 160mm crankset arms for the equivalent set in 170mm. Mine are in very good condition, with dust caps and decals.

Scott

[brockd15]

Anybody want to trade a Brooks Swift, preferably in black, for a black Brooks Swallow. Mine has chrome rails and rivets and I've ridden it maybe 20 miles. I got it used and the person before me used it for couple hundred. Very nice condition, but I'd like to try a Swift.

[cudak888]

Trying my luck again here...

ISO: Early Sturmey-Archer lamp bracket, like the one below:



-Kurt

[photogravity]

Trying my luck again here...

ISO: Early Sturmey-Archer lamp bracket, like the one below:



-Kurt

Does it need to be rusty as this one or is a custom rust-free reproduction acceptable? If so, I think I have your ticket. My 1951 Raleigh Lenton Tourist appears to have the same lamp and it should fit. I'll take a picture when I get home and post it for you.


Lenton Tourist - 49 by Sallad Rialb, on Flickr


Lenton Tourist - 48 by Sallad Rialb, on Flickr


Lenton Tourist - 18 by Sallad Rialb, on Flickr

[blue9]

I'd really like to find a long pantographed Ciöcc seatpost (longer than the post pictured below).
I have this aero Campy seatpost to trade/partial trade/whatever. It came with a Ciöcc I recently purchased. The guy I bought it from noted the hand-drilled "pits" and thought that a previous owner of the seatpost probably did this to try to create a tighter fit with another bike. At this point the "crater lips" that would have been created via drilling are gone, leaving a smooth shaft. The pits are cosmetic only, and won't show once the seatpost is inserted into the seat tube.

[Puget Pounder]

^^^

Speed holes!

[degan]

ISO a set of triple crank arms, preferably 175, but 172.5 or 170 would work. 110/74 BCD I believe. I just need something touring capable, having just destroyed my current set. No chainrings needed.

[GuyForget]

New to this sort of thread..

I have a 22mm Belleri Stem, 110mm length 25.4mm clamp (I'm assuming.. the bars measure anywhere from 25.3 to 25.15)

The reach feels a bit far for me. I'm new to road bikes, but the hoods are not ridable and the bars don't block the hub (general sizing clue found online). I like my bars but I'd like to try out a shorter stem. Does anyone have a 22mm stem with 25.4mm clamp in 90mm they'd be interested in trading for my current stem or selling? I'd like to stay with the french size before sanding down a new Nitto. I'm a little worried by some of the stems on ebay being death stems and figure people here wouldn't keep something like that around.

[whatwolf]

WTT: My 7cm silver Cinelli (1A?) stem in nice used shape for an 8.5 or 9cm silver Cinelli stem in nice used shape. 26.4 clamp.
(Measurements are c-c across the top. I don't know why photos from my phone always upload upside down.)

Also looking for a similar length stem w/ 26.0 clamp. Silver or black is ok for the 26.0 stem.

I have other stems to trade, too, including a nice gold milled Mavic, and some other stuff.

PM me please, I don't check this thread that often.

[blue9]

^^^

Speed holes!

Ha ha! And they dramatically reduce the weight! Double-speed feature!

[jjhabbs]

Looking for Mavic 32 hole clincher rims. Must be good shape.
Looking for 27.0 campy post.
Looking for parts for huret duopar rear derailleurs. The slotted washer that keys into the derailleur so it doesnt pivot forward when mounted.
42cm Cinelli bars.

I have tons of stuff.

[Drillium Dude]

^^^

Speed holes!

Termites

That was not my "work", in case anyone was wondering

DD

[gomango]

Anybody want to trade a Brooks Swift, preferably in black, for a black Brooks Swallow. Mine has chrome rails and rivets and I've ridden it maybe 20 miles. I got it used and the person before me used it for couple hundred. Very nice condition, but I'd like to try a Swift.

Got a pic?

I'll show you my Swift, if you show me your Swallow.

If it looks good, I'd be happy to, as I need one for a little project I have on the burners.

[ColonelJLloyd]

I suppose those marks were made with an awl or something similar because it was slipping in someone's frame.

[23skidoo]

I suppose those marks were made with an awl or something similar because it was slipping in someone's frame.

One of the wrenchers at my lbs has a small tool that makes little craters like that, I've seen him use it on a couple of fork crowns to raise enough metal to seat the race snugly.

[WJV]

One of the wrenchers at my lbs has a small tool that makes little craters like that, I've seen him use it on a couple of fork crowns to raise enough metal to seat the race snugly.

Common in metal shops: http://en.wikipedia.org/wiki/Automatic_center_punch

Also ISO: Front and rear Nuovo Record Axles, have the QR's and any Colnago panto'd parts that don't have a home.
Have: a good amount of random stuff.

[iTod]

Have a NOS Mavic 501 28 hole front hub with skewer and display box. A little bit of shop wear. Would love to trade for similar 32 hole hub. And in a just world, I'd be able to lay my hands on a Campy Centaur 32 hole front hub in century gray...
I can post pictures tomorrow if anyone's interested. (I know, I know... )

[brockd15]

Got a pic?

I'll show you my Swift, if you show me your Swallow.

If it looks good, I'd be happy to, as I need one for a little project I have on the burners.

Sure thing...just took a few this morning. PM coming as well.
Thanks!

[DirtyHarry714]

Thought i would test my luck here once again. I have two wheels (not a set) that i'm either trying to find a match for each or trade the wheels individually or hubs.

Here is what i have:

Front Wheel: Mavic Open 4 CD 700c, Campy record 32h pat.72
Rear Wheel: Mavic MA40 Green Label 700c, Campy 50th Anniversary threaded hub (english)

If nobody has a trade or wants them i guess i'll use them as daily riders.

-Harry

[rhm]

I suppose those marks were made with an awl or something similar because it was slipping in someone's frame.

Nah, BB gun.

[owenmyers]

ISO -

7 speed freewheel, not cassette
Bar end shifters or 2x7 STI shifters (If those exist)
Saddle
90-100mm 22.2 quill stem, 26.0 clamp, Cinelli, ITM, 3TTT, or similar
Just hoping to change up my inventory, send me some offers

Have -

90's 700c Mavic helium wheelset with Sram PG950 cassette
Nitto Olympiade 113 Drop bars 25.4, 39
Nitto quill stem 25.4, 22.2, 75mm
2003 KHS Flite 500 frame Reynolds cro-mo, 58cm
2007 Rocky Mountain RC30 frameset Aluminum, 22.0
Brand new Campagnolo Centaur crankset with Mirage 52/39 chainrings
50's 4 speed J.Moyne freewheel
& Some other components

Thanks
Owen M.

[Geo_08]

Thought i would test my luck here once again. I have two wheels (not a set) that i'm either trying to find a match for each or trade the wheels individually or hubs.

Here is what i have:

Front Wheel: Mavic Open 4 CD 700c, Campy record 32h pat.72
Rear Wheel: Mavic MA40 Green Label 700c, Campy 50th Anniversary threaded hub (english)

If nobody has a trade or wants them i guess i'll use them as daily riders.

-Harry

Pm sent


Have
Cinelli xa stem
Cinelli giro Italia bars 64 42, a bit rough
Campy front skewer
Campy nuovo record seat post
Dt cable guides off trek 1420
62 cm trek 1430 Al frame and fork
Shimano 35.5 FD clamp
Brand new carbon bontrager seat post, 400mm 20 mm offset 27.2mm
Ma40 rim laced to Campy super record hub
1973 (?) Motobecane Grand Record, with campy nuovo, will part out group


Want
Ec70 seatpost 27.2
1 to 1 carbon stem
Chorus, Athena, mirage front hub laced to mavic open pro rim
Campy 8 speed chain
Weimann non aero hoods
Pointy Campy 8 speed ergo hoods
Engraved Campy cranks from 8 and 9 speed era
Campy chain rings
Bianchi frames
Campy dual pivot brakes
Campy hubs

[Drummerboy1975]

Those look like pein marks from some one peining the seat post to make it fit better for a more snug fit in a seat tube it didn't fit in.

[bibliobob]

Want: early or mid '70s Colnago Super frame set in the 58-60cm range.

Have: late 70s Colnago (62 x 59) frame set, 57 cm Urago frame set, 59 cm Libertas frame set, and much more....