Movimento 5 Stelle (M5S)
Rohloffs seen on the commute: 3
Visit my blog at: http://achiccoincidence.blogspot.com
They're really slick/steathly looking for road fenders!
I did get a set of full length fenders for my commuter. Ditched the clip ons & installed them before dinner.
Giant Defy Dura Ace : Rip/Hammer-Specialized Allez Ultegra/105 : Recovery/Spinner-Specialized Allez Red : Trainer-Kona Major(Rad) Jake : Down & Dirty
I got a sidewall generator off ebay. I haven't even decided which bike it's for.
And thanks to another thread praising it, I bought a Garmin Edge 200 GPS. I got an open package (actually a lack of a package) but new, on ebay for only about 88 bux. I'm excited. I'll need N (or N+1) mounts for it.
$T2eC16d,!)QE9s3HF4sWBSFOpt6Zp!~~60_12.JPG + sku_164546_2.jpg = 2013-11-19_093159.png
but they cost me $6 rather than $15
The nice thing about the clamp is that the "vice" end of the clamp will be attached to the handle bar of my bike and can easily be unclamped and moved to another bike with the lights attached.
Sorry, kids, the last cheque from my chequing account is going to pay the undertaker and it's going to bounce.
New Schwalbe Marathon tires to replace my 20-y/o Avocet Cross-Ks. I hadn't realized just how bad the Avocets were getting.
"Ahab knew, baby...I lust." -- Vet-san
Ordered a B&M Eyc with a standlight, & IQ2 diode reflector technology, to replace the Lyt BN,
that lacks the standlight, so light goes off as soon as I stop..
for my Brompton-Shimano hub dynamo light set..
And an Ixon IQ battery headlight , with the same well engineered beam pattern.
The planet bike battery lights are still a more than decent flashlight.
Nitto Noodle bars, Cinelli Bar Tape, a bikerack, cargo straps for rack, new stem, new chain, Light & Motion Urban 700 (got a good deal), tubes, 2 blinkies (lost one already). Tonight I will be buying a new tire on my way home, my back tire has an odd defect that is causing problems in mounting and ride quality.
A new bell helmet that is full of vents. The nutcase just wasn't cutting it for me.
new brake pads.
For my unborn Bill Holland path racer, Cinelli/RaphaNYC bar tape, black with pink highlights off eBay. Most expensive bar tape I ever bought. I wasn't about to lose that auction!
New brake hoods. If I was persnickety I would have tried to get the original name brand Dia Compe non-aero hoods, but I'm not that fussy, so I "settled" quite comfortably for the Cane Creek knock-offs. I had a hard time finding the right length transverse cables for my cantilever brakes - they need a nub on both ends, but I finally found those too, so I am ready to replace worn out long brake cables, transverse cables, and hoods. I might not do it til spring as we are talking about my "summer" commuter bike, which I'm not riding now.
I bought a new (used) frame and fork, Gunnar Crosshairs, and had my bike shop swap parts from my Gunnar Sport for the build. Sold the Gunnar Sport frame and other parts, so I have a lot of spare cash to use (if needed) for other parts and gear.
The Crosshairs didn't need much, but I had the LBS install a new chain, cables, bar tape and seat tube collar. I was going to keep using the tires that were on the Sport, but decided to replace them because they had a lot of miles and some visible cracking and dry rot. For the time being, I'm using some old Michelin Pro2 tires that I had on hand, but have ordered some Rivendell Ruffy Tuffy tires for the bike. Installed a rear rack and trunk bag, which I already had on hand.
I hadn't bought any winter clothes in a while, so I splurged on a Showers Pass Elite jacket because my existing Craft jacket is not well ventilated and sweats a lot in temperatures warmer than 50 F. Also ordered some new winter gloves, knee warmers and wool socks.
My final purchase was a Light & Motion Vis 360 helmet light, which I got mainly for safety and convenience. I have found that a helmet light works better than anything for preventing drivers from pulling out or turning in front of you. I had been using a flashlight attached to my helmet but the Vis 360 is lighter, less bulky and more effective.
MetroFlash tail light arrived yesterday. So far I'm impressed with this cheap little light. Much brighter than my old light, which isn't saying much.
after riding used and rebuilt bikes most of my life,I brokedown and bought a new 2013 Salsa Vaya3,swapped the racks and bags from my mountain bike,also mounted the lights.now if the snow clears from the streets I'll get a chance to ride and adjust the fit!
Hand-built wheels... XT hubs laced to Open Pro rims for my Macho Man disc build.
Nothing for the bike; it continues to run perfectly and without problem (air tires, lube chain . . . otherwise no maintenence) but I bought De Feet wool long-finger gloves and De Feet wool (mostly) base layer for comfort on my cooler weather morning commute.
Rick / OCRR
a guinness water bottle
With the exception of my original post, the original Tektro front brakes on my Jamis Commuter failed today, so I ordered a set (front/rear) of Avid Single Digit 3 v-brakes which were on sale for the cost of a set of cheap v-brake pads.
its weird but I buy stuff periodically for the bike but it takes a while for me to sit down and actually install it... but I bought a set of planet bike panniers with trunk bag and a seatpost rack (it has bars / guards to keep the panniers out of the spokes... I have gone on a couple of rides with it and everything seems to be working well)... also got a "cree 1500+ lumens" light off of amazon (based on recommendations in a light thread here) seems to work pretty well. I also have a light that puts out a yellow light for under the bike to help be seen, high vis vest...