I want a kick stand!
#1
.
Thread Starter
Join Date: Apr 2005
Location: .
Posts: 3,094
Bikes: .
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I want a kick stand!
I've got a Burley Nomad trailer, and a Specialized go-fast bike, great rig, but the bike won't accept the cheesy-but-reliable $10 kickstands you can get everywhere, I'm wondering, has someone come up with a good kickstand for these modern bikes?
I probably had close to 100 lbs in the trailer this morning, I'm not touring actually, I'm using the trailer for my electronics swapmeet load-carrying once a month. Since the trailer attaches to the side of the rear hub, the more of a load is in there, the more of a force there is on that side of the hub making the bike want to fall over (more than it already does lol).
I'm afraid I may have to invent something but first I want to see what's already out there. Thanks in advance!
I probably had close to 100 lbs in the trailer this morning, I'm not touring actually, I'm using the trailer for my electronics swapmeet load-carrying once a month. Since the trailer attaches to the side of the rear hub, the more of a load is in there, the more of a force there is on that side of the hub making the bike want to fall over (more than it already does lol).
I'm afraid I may have to invent something but first I want to see what's already out there. Thanks in advance!
#2
I can't remember
Join Date: Jun 2003
Location: Ireland
Posts: 74
Bikes: Thorn Raven
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
would something like this do the trick?
https://www.medientechnik-****e.de/he...?id=0690_NL_E1
Might have to order it online though
https://www.medientechnik-****e.de/he...?id=0690_NL_E1
Might have to order it online though
#3
No longer in Wimbledon...
Join Date: May 2005
Location: Hong Kong
Posts: 865
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Carelessly installed, they are a great way to crush a tube. Somone posted a nasty photo of such in the Mechanics or Classic/Vintage section a week ago.
I used to use a BOB Yak. It attached to the bike in such a way that if you jackknifed it, the trailer functioned as a stand through the rear axle. Doesn't look like your Nomad can do it though...
I used to use a BOB Yak. It attached to the bike in such a way that if you jackknifed it, the trailer functioned as a stand through the rear axle. Doesn't look like your Nomad can do it though...
#4
.
Thread Starter
Join Date: Apr 2005
Location: .
Posts: 3,094
Bikes: .
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hmm, I'm working on this ..... yeah I know the old dime store cheapie stands can crush a tube or two, and I'm sure it's not pretty.
I'm thinking I'll have to invent one, although if I invent something good, it might be something someone else wants to use too.
I'm thinking I'll have to invent one, although if I invent something good, it might be something someone else wants to use too.
#5
la moda de nada
Join Date: Apr 2005
Location: Seattle
Posts: 54
Bikes: early 80's bianchi dog/ Klein Pulse Race
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
There's a swiss company Pletscher that makes a heavy duty bipod kickstand that's great for a bike with a load. They're expensive, however; the harris cyclery sells 'em for $50
https://sheldonbrown.com/harris/acces...tml#kickstands
One of my LBS's also sells them, so they aren't that rare. I got one off of ebay for $25 with shipping. Works well.
https://sheldonbrown.com/harris/acces...tml#kickstands
One of my LBS's also sells them, so they aren't that rare. I got one off of ebay for $25 with shipping. Works well.
#6
.
Thread Starter
Join Date: Apr 2005
Location: .
Posts: 3,094
Bikes: .
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm working on it ....... don't need the ability necessarily to "kick" it down whenever I stop, just want a way to make the bike stand up when I"m not on it, like any self-respecting horse. The good news is, my creation will like as not involve carbon fiber!
#7
Junior Member
Join Date: Apr 2005
Location: Buffalo, NY
Posts: 9
Bikes: Trek 7100, '05 custum titanium solar-powered recumbent unicycle
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
excuse my ignorance, but i was just wondering how they would crush the tube?
thanks.
thanks.
#9
Member
Join Date: Mar 2005
Location: Carver, MA
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by beekay
There's a swiss company Pletscher that makes a heavy duty bipod kickstand that's great for a bike with a load. They're expensive, however; the harris cyclery sells 'em for $50
https://sheldonbrown.com/harris/acces...tml#kickstands
One of my LBS's also sells them, so they aren't that rare. I got one off of ebay for $25 with shipping. Works well.
https://sheldonbrown.com/harris/acces...tml#kickstands
One of my LBS's also sells them, so they aren't that rare. I got one off of ebay for $25 with shipping. Works well.
#10
Bye Bye
Join Date: Jul 2005
Location: Gone gone gone
Posts: 3,677
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I've got one of these:
Tranz X Stay Mount
Works well with fully loaded panniers.
It doesn't come with any "padding" for in between the kickstand and the bike - I used some old rubber from a dead floor mat.
Tranz X Stay Mount
Works well with fully loaded panniers.
It doesn't come with any "padding" for in between the kickstand and the bike - I used some old rubber from a dead floor mat.
#11
Senior Member
Join Date: Jun 2005
Location: OK
Posts: 780
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Take a look at the new Topeak Flashstand. I have to use it with my Specialized Allez Comp Triple to avoid leaning it against something (wall, fence, tree, etc) or laying the bike down. It fits nicely in my handlebar bag. https://www.topeak.com
#12
Senior Member
Join Date: Apr 2005
Posts: 309
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I just looked at that Topeak Flashstand and I don't understand how it works... I had that feeling many times these days... I guess I'm loosing the little brain I have left from my teenage drinking binges.
#13
Senior Member
Join Date: Jun 2005
Location: OK
Posts: 780
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It works GREAT! It unfolds with two legs extending to the ground from a the "main" body/part of the stand that the contains two ribber pads that the bottom bracket housing/frame sits/rests on and an arm with a padded "hook" hooks over/around the frame down tube. It also doubles as a work stand for derailer, chain, etc attention. It weighs 17 ounces and folds into a 3"x7"x1.5" bag that is included with the stand. It isn't the most stable on grass or rough/uneven ground but for aprox. $30.00 it is very versitile and convenient for frames that are not compatible with "bolt on" stands. Good luck !!!