Ordering a Mercian
#1
King of the Hipsters
Thread Starter
Join Date: Jan 2005
Location: Bend, Oregon
Posts: 2,128
Bikes: Realm Cycles Custom
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Ordering a Mercian
Someone wrote a PM to me, thinking I had ordered a Mercian Super Vigorelli.
I didn't.
However, I have corresponded with Mercian and learned a lot.
The Super Vigorelli, custom proportioned (no extra cost), will show up at the buyer's specified address, here in America, two to three weeks after placing the order, for about $1000, shipping included.
They asked me to do the body measurement thing, email a small picture of myself riding my present bike, my present bike's geometry, and for me to tell them what I liked about my bike and what I didn't like.
When asked about the lightest tubing, they said the differences in tubing affected the handling more than the weight, and if I didn't know what I liked to trust them and probably go with the cheapest tube set.
They said they would do a threadless headset or a threaded headset, as I preferred.
I had two rounds of email with Mercian, and they sent me a very nice brochure with enamel chips of the paint choices.
Local friends who have made lugged bicycles sometime in the past describe Mercian's Open Hearth Brazing method as a good method for getting consistent results.
Friends who have owned Mercians praise the finish.
So, I haven't ordered one, yet.
Maybe in the Spring, or maybe not.
I turn 60 in July of 2006.
It seems like a reasonable Birthday present to myself.
I mean, someone might accuse me of a second childhood thing, and rightfully so, but at least I don't want a Corvette.
Anyway, very friendly emails from Mercian.
They want the business and I think will guard their reputation by doing a good job.
I never thought I'd want a red bike, but that red Vigorelli looks good:
https://www.merciancycles.co.uk/frame_vigorelli.asp
I didn't.
However, I have corresponded with Mercian and learned a lot.
The Super Vigorelli, custom proportioned (no extra cost), will show up at the buyer's specified address, here in America, two to three weeks after placing the order, for about $1000, shipping included.
They asked me to do the body measurement thing, email a small picture of myself riding my present bike, my present bike's geometry, and for me to tell them what I liked about my bike and what I didn't like.
When asked about the lightest tubing, they said the differences in tubing affected the handling more than the weight, and if I didn't know what I liked to trust them and probably go with the cheapest tube set.
They said they would do a threadless headset or a threaded headset, as I preferred.
I had two rounds of email with Mercian, and they sent me a very nice brochure with enamel chips of the paint choices.
Local friends who have made lugged bicycles sometime in the past describe Mercian's Open Hearth Brazing method as a good method for getting consistent results.
Friends who have owned Mercians praise the finish.
So, I haven't ordered one, yet.
Maybe in the Spring, or maybe not.
I turn 60 in July of 2006.
It seems like a reasonable Birthday present to myself.
I mean, someone might accuse me of a second childhood thing, and rightfully so, but at least I don't want a Corvette.
Anyway, very friendly emails from Mercian.
They want the business and I think will guard their reputation by doing a good job.
I never thought I'd want a red bike, but that red Vigorelli looks good:
https://www.merciancycles.co.uk/frame_vigorelli.asp
#2
Wake Up America!
Join Date: Dec 2005
Location: San Leandro, CA
Posts: 417
Bikes: Bridgestone MB-1, Expert Dave Scott, Balance MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have a friend who picked one up for free! it was laying in some guys backyard and he said he could have it.
#3
Radio Bemba 00.0
Join Date: May 2005
Location: Rocking the spot.
Posts: 866
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Do it Ken!! You deserve it. Seriously. Treat yourself to an awesome bike, Mercian or not. Get whatever you want. Gotta do it right for the big 6-0.
#4
MADE IN TAIWAN
Join Date: Feb 2005
Location: SF
Posts: 2,438
Bikes: Tarmac, Humble, Makino, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
get one... we need more bike pr0n! I drool over mercian just because they are pure class.
#6
seniorita member
Join Date: Feb 2004
Location: London
Posts: 731
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by eat_raw
Apparently, they respond to email (and promptly).
Can't really say the same about Bob Jackson.
Can't really say the same about Bob Jackson.
#7
or tarckeemoon, depending
Join Date: Dec 2005
Location: the pesto of cities
Posts: 7,017
Bikes: Davidson Impulse, Merckx Titanium AX, Bruce Gordon Rock & Road, Cross Check custom build, On-One Il Pomino, Shawver Cycles cross, Zion 737, Mercian Vincitore, Brompton S1L, Charge Juicer
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Yes! Go for it and post pics!
#8
Senior Member
Join Date: Mar 2005
Location: Illinois
Posts: 211
Bikes: Kona Hoss Deluxe, Rans Tailwind, KHS Solo One SE
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hey Ken, congrats!
I was curious though, can you confidently squeeze a 28mm tire in there? It sounds like it's 25 or less.
And, can you order almost any of the bikes with horizontal drop outs? Or just the Vigorelli?
I was curious though, can you confidently squeeze a 28mm tire in there? It sounds like it's 25 or less.
And, can you order almost any of the bikes with horizontal drop outs? Or just the Vigorelli?
#9
seniorita member
Join Date: Feb 2004
Location: London
Posts: 731
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by 610
Hey Ken, congrats!
I was curious though, can you confidently squeeze a 28mm tire in there? It sounds like it's 25 or less.
And, can you order almost any of the bikes with horizontal drop outs? Or just the Vigorelli?
I was curious though, can you confidently squeeze a 28mm tire in there? It sounds like it's 25 or less.
And, can you order almost any of the bikes with horizontal drop outs? Or just the Vigorelli?
"Most of our frame models can be built as a track model if you desire."
https://www.merciancycles.co.uk/frames_story.asp
#10
Dismount Run Remount etc.
Join Date: Apr 2005
Location: Some Latitude and Some Longitude
Posts: 2,235
Bikes: A couple customs and some beaters.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This is a rather timely thread as I'm planning on placing my Mercian order in the next few days. It says the waiting list for custom frames is 12-16 weeks, which I'm hoping is true because I sure as hell don't have the grand it's going to cost right now...
I'm gonna go with the Vigorelli with an undrilled fork, electric blue pearl base, silver pearl contrasting head tube and silver pearl seat tube stripes in reynolds 631 tubing. I'm going to tell them I want it as TIGHT as will allow 700x23 tires.
I'm gonna go with the Vigorelli with an undrilled fork, electric blue pearl base, silver pearl contrasting head tube and silver pearl seat tube stripes in reynolds 631 tubing. I'm going to tell them I want it as TIGHT as will allow 700x23 tires.
#12
hateful little monkey
Join Date: May 2003
Location: oakland, ca
Posts: 5,274
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by 12XU
I'm going to tell them I want it as TIGHT as will allow 700x23 tires.
#13
Dismount Run Remount etc.
Join Date: Apr 2005
Location: Some Latitude and Some Longitude
Posts: 2,235
Bikes: A couple customs and some beaters.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by jim-bob
This is something I just don't understand in a bike that's going to see street. Do you have totally bulletproof wheels or something?
#14
hateful little monkey
Join Date: May 2003
Location: oakland, ca
Posts: 5,274
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by 12XU
It's for track use only, homie. I have a "street track" bike and a road conversion for bombing around town. My wheelset is C-Record laced to Campy Omega/Mavic M-4 sew-ups.
#16
Frankly, Mr. Shankly
Join Date: Oct 2002
Location: Chicago
Posts: 3,482
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've emailed both and they both seem to be quite responsive.
With Bob Jackson, I also traded emailed with the factory manager. This summer the wait was about 10 weeks. I suspect it's shortened now.
Mercian is quite accomodating as Ken mentioned and I received a reply from them this morning (I sent an email last night). 3 months turnaround time, fully custom. Chroming on the rear is 50 pounds, front, 38 pounds. 4 months turnaround with chrome.
With Bob Jackson, I also traded emailed with the factory manager. This summer the wait was about 10 weeks. I suspect it's shortened now.
Mercian is quite accomodating as Ken mentioned and I received a reply from them this morning (I sent an email last night). 3 months turnaround time, fully custom. Chroming on the rear is 50 pounds, front, 38 pounds. 4 months turnaround with chrome.
#17
plucky russian.
Join Date: Jul 2004
Location: chicago. southside.
Posts: 1,050
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
sorry but every time i see this thread, i think it says "Ordering a Mexican".
I have absolutely nothing valuable to contribute except I love the fact that you're turning 60 and riding like mad. 60 is the new 40. or something like that.
I have absolutely nothing valuable to contribute except I love the fact that you're turning 60 and riding like mad. 60 is the new 40. or something like that.
#18
Dismount Run Remount etc.
Join Date: Apr 2005
Location: Some Latitude and Some Longitude
Posts: 2,235
Bikes: A couple customs and some beaters.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
E-mailed my measurements to them this evening; expecting a phone call tomorrow morning to give them the rest of the custom details and charging my deposit. Here's to a new Mercian in late March (and hopefully built up with all of the bits I'll be buying between now and then).
#19
can't member
Join Date: Jan 2005
Location: Iowa City
Posts: 1,742
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 9 Times
in
6 Posts
I purchased a Mercian custom in '04. It took about 5 months from order to delivery. The service from Mercian was spectacular! They called me several times during production to check in on things and keep me abreast of the progress. And the final product is wonderful. I should’ve done it long ago… I highly recommend them. I plan to purchase a custom tandem from them before I get too old.
#20
Just riding
Join Date: Oct 2004
Location: Exeter, UK
Posts: 651
Bikes: Cannondale Bad Boy / Mercian track / BOB trailer / Moulton recumbent project
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Mercians are lovely - I have their Lugless Track with a few extra braze-ons and it's a light, lively, springy ride that takes insane punishment (offroad!). The finish is sweet classic enamel. Yes, they take a while to make to order, but this is artisan framebuilding, you expect that. Savour the wait and spend the time buying components!