Single speed crank on Cannondale F300
08-10-06 | 07:09 PM
#1
Thread Starter
what the deuce!?
Joined: Aug 2005
Posts: 79
Likes: 0
From: Ohio
Bikes: 06 Cannondale F300,2007 BMC trailfox, 1972 Raleigh Sports,70's-80's Concord Bentley
Single speed crank on Cannondale F300
I just bought and F300 and I want to put a single speed crank on the front... does anyone have a suggestion as what I can use or what would fit? I saw this as an idea..tell me what you think.
Thanks! https://www.blueskycycling.com/produc...P-Crankset.htm
Thanks! https://www.blueskycycling.com/produc...P-Crankset.htm
Last edited by bomble37; 08-10-06 at 07:31 PM.
08-10-06 | 09:36 PM
#3
is slower than you
Joined: Jan 2005
Posts: 1,486
Likes: 0
From: WI
Bikes: Gunnar Sport, Marin Pine Mountain, Gunnar Ruffian, Gunnar Roadie, BMC Fourstroke, Salsa Vaya
Will you be setting the bike up as a singlespeed, or will you still have multiple gears in the back? I.e., why only a single up front?
08-13-06 | 03:51 PM
#5
Senior Citizen
Joined: Jul 2005
Posts: 321
Likes: 0
Bikes: Kona Unit, Orbea Volata
Use you current crankset and remove the granny and big rings. If you are going to install a bash guard use the current ring bolts, if not get a set of bmx bolts (shorter).
Welcome to the dark side!
Welcome to the dark side!
