Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Best way to clean rear cassette/chain?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Best way to clean rear cassette/chain?

Old 01-02-07, 10:33 PM
  #1  
Senior Member
Thread Starter
 
Sincitycycler's Avatar
 
Join Date: Mar 2005
Location: "Gosh honey, you pass more like Tony Rominger..."
Posts: 3,218

Bikes: 2005 Scott CR1 Pro - 1992 Panasonix Fixed Conversion 60tx20t

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Best way to clean rear cassette/chain?

I think I over-oiled my chain a month ago and now my cassette is black and so is my chain.

My common sense says take the cassette off and let it soak in a bowl of brake cleaner? What is the preffered method?
__________________
"How did all those 'Keep Off the Grass' signs get there?"
Sincitycycler is offline  
Old 01-02-07, 10:39 PM
  #2  
Chief Chef
 
BearsPaw's Avatar
 
Join Date: Mar 2006
Location: Montana
Posts: 225

Bikes: 2005 Fuji Touring, 70s Motobecane Grand Record, Sekai 2500, crappy mountain bike from dumpster, cyclone cycles titanium road bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I don't know if this is the preferred way, but I soak mine in Simple Green. I have not had any problems with this method.

Simple Green is available pretty much everywhere; I get it at Walmart.
BearsPaw is offline  
Old 01-02-07, 11:06 PM
  #3  
Senior Member
Thread Starter
 
Sincitycycler's Avatar
 
Join Date: Mar 2005
Location: "Gosh honey, you pass more like Tony Rominger..."
Posts: 3,218

Bikes: 2005 Scott CR1 Pro - 1992 Panasonix Fixed Conversion 60tx20t

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by BearsPaw
I don't know if this is the preferred way, but I soak mine in Simple Green. I have not had any problems with this method.

Simple Green is available pretty much everywhere; I get it at Walmart.
Automotive section?
__________________
"How did all those 'Keep Off the Grass' signs get there?"
Sincitycycler is offline  
Old 01-02-07, 11:37 PM
  #4  
Senior Member
 
Join Date: Jul 2005
Posts: 3,268
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 118 Post(s)
Likes: 0
Liked 50 Times in 25 Posts
The nice thing about simple green is that you can flush the stuff down the toilet when you're done. No nasty solvents to get rid of. Grocery and hardware stores have it. It also cleans brake crud off the rims well if you use it with scotch cloth. Also at the hardware store. bk
bkaapcke is offline  
Old 01-02-07, 11:50 PM
  #5  
Full Member
 
intron's Avatar
 
Join Date: Jun 2005
Posts: 352
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 52 Times in 21 Posts
Originally Posted by BearsPaw
I don't know if this is the preferred way, but I soak mine in Simple Green. I have not had any problems with this method.

Simple Green is available pretty much everywhere; I get it at Walmart.

i use simple green to clean chains too. a tip, put the chain in tupperware or something like that, spray a good dose of simple green, then add some boiling or really hot water, let sit for a a few minutes. the heat breaks down the grease. pop the lid on the contiainer and shake it like crazy. works real well to degrease. or use an old pot add simple green and water and slowly boil and mix chain around with something.

be careful, i found that when using simple green on raw, unpolished/plated steel, rust will form on the chain pretty fast, so once dry oil it up.

cheers
intron is offline  
Old 01-03-07, 12:04 AM
  #6  
Senior Moment Member
 
Gee3's Avatar
 
Join Date: Oct 2005
Location: Daly City, CA
Posts: 1,362

Bikes: Specialized Allez Elite Double & 2008 Look 555

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I like to scrub the cassette with a brush and simple green. And since most of the cogs come off I fcan get at them on both sides. For the rest I used the Park Tool brush to get in between the cogs. Prior to buying one I used a towel and wedged the towel between the cogs to clean them in between.

As for the chain, I'm lazy so I recommend buying one of those chain cleaners that you "attach" to the chain while on the bike and it cleans it as you turn the crank. Then take the brush and spray the derailer pulleys with simple green and scrub really good. Then I usually dry everything off with a towel and proceed to oil the chain and put a drop or two of oil on the cogs and the moving parts/joints(?) of the derailers, brakes calipers, etc. Also, put a drop of oil on each chain link. Then wipe off any excess with a towel.

Be sure not to over oil the chain and wipedown any excess or you'll attract a bunch of dirt and grime.

Good luck!
Gee3 is offline  
Old 01-03-07, 04:55 AM
  #7  
Senior Member
 
kk4df's Avatar
 
Join Date: Jun 2006
Location: Augusta, GA
Posts: 639

Bikes: Bottecchia CF frame and fork, Ultegra 6603 crank and FD, DuraAce RD, Easton Vista wheels, Brooks B-17 saddle, Shimano 105 brakes, Michelin Pro2 Race tires

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Sincitycycler
I think I over-oiled my chain a month ago and now my cassette is black and so is my chain.

My common sense says take the cassette off and let it soak in a bowl of brake cleaner? What is the preffered method?
I take the chain off, and clean it in kerosene. Then I take an old toothbrush and brush the cassette cogs with some kerosene, then use a rag and clean in between the cogs (like flossing your teeth).

I will use Simple Green on the bike frame and other parts, but not any place where there's grease. Grease and water just don't seem to mix well, so I don't like using anything that is water-based to clean those areas. It gets enough water on the rainy rides without my help.
kk4df is offline  
Old 01-03-07, 08:18 AM
  #8  
pedal head
 
Join Date: May 2006
Posts: 1,004
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by kk4df

Grease and water just don't seem to mix well, so I don't like using anything that is water-based to clean those areas. It gets enough water on the rainy rides without my help.
Simple Green is great for removing grease and oil- this quote was taken from their website:

https://consumer.simplegreen.com/cons_tips.php "...Simple Green’s forte is breaking down petroleum greases, oils, tar and asphalt soils..."
probable556 is offline  
Old 01-03-07, 08:30 AM
  #9  
Making a kilometer blurry
 
waterrockets's Avatar
 
Join Date: May 2006
Location: Austin (near TX)
Posts: 26,170

Bikes: rkwaki's porn collection

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Liked 91 Times in 38 Posts
I would use a grease remover (any suggested elswhere in this thread -- I use mineral spirits since I have that around anyway) and a toothbrush on the cassette. Don't forget your rear der pulleys, which should be removed for cleaning.

For the chain, maybe dampen a rag with WD-40 and wipe just the plates (sides) of the chain. I never clean a chain more than that (or a hose-drip after a rainy ride).
waterrockets is offline  
Old 01-03-07, 09:07 AM
  #10  
Senior Member
 
George's Avatar
 
Join Date: Jul 2006
Location: Katy Texas
Posts: 5,668

Bikes: Specialized Roubaix

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 92 Post(s)
Liked 51 Times in 30 Posts
I get a bucket and fill it half way with water set the wheel on top of that and spray brake cleaner on it.
__________________
George
George is offline  
Old 01-03-07, 11:57 AM
  #11  
Senior Member
 
Join Date: Sep 2002
Location: Philadelphia suburb
Posts: 911
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Gee3
As for the chain, I'm lazy....
Cleaning your chain on the bike usually entails attention to avoid undue dripping of your cleaning solution and lube of your tire rims, plus a fair amount of clean-up afterwards. I find that it's less work to use a removeable link, take the chain off the bike, clean and lube, then replace. And because it's less work and easier, I do it more often.
lrzipris is offline  
Old 01-03-07, 12:19 PM
  #12  
Senior Member
 
balto charlie's Avatar
 
Join Date: Aug 2004
Location: Baltimore/DC
Posts: 2,942
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 156 Times in 99 Posts
Originally Posted by waterrockets
Don't forget your rear der pulleys, which should be removed for cleaning.

.
i didn't clean my RD pulleys last time and came up with mysterious squeak. I thought it was my BB, cleaned the RD completely and squeak disappeared.
I use the large bottle of Citrus cleaner at Home depot(10.00/gallon or such). It too can be poured down the drain.
Ultimately though, I think using White lightning is the best way to go. Cleaning is seldom needed just frequent lube applications.
balto charlie is offline  
Old 01-03-07, 12:31 PM
  #13  
Chief Chef
 
BearsPaw's Avatar
 
Join Date: Mar 2006
Location: Montana
Posts: 225

Bikes: 2005 Fuji Touring, 70s Motobecane Grand Record, Sekai 2500, crappy mountain bike from dumpster, cyclone cycles titanium road bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Sincitycycler
Automotive section?
*nod*
BearsPaw is offline  
Old 01-03-07, 02:03 PM
  #14  
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,092 Times in 2,325 Posts
Originally Posted by bkaapcke
The nice thing about simple green is that you can flush the stuff down the toilet when you're done. No nasty solvents to get rid of. Grocery and hardware stores have it. It also cleans brake crud off the rims well if you use it with scotch cloth. Also at the hardware store. bk
You don't have to get rid of it but the waste system has to, along with the lubricant you dissolved off. Oil in the municipal waste water system isn't a good thing. You aren't going to polute the system by yourself but you and 20,000 of your buddies can do some real damage.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Old 01-03-07, 02:08 PM
  #15  
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,092 Times in 2,325 Posts
Originally Posted by probable556
Simple Green is great for removing grease and oil- this quote was taken from their website:

https://consumer.simplegreen.com/cons_tips.php "...Simple Green’s forte is breaking down petroleum greases, oils, tar and asphalt soils..."
SG doesn't "break down" anything. It dissolves it. Once in solution, the oil is still an oil and has to be treated. It doesn't just go away, not without fire and oxydation, anyway. kk4df is correct about keeping petroleum products away from water...at least if someone wants to use the water later.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Old 01-03-07, 02:16 PM
  #16  
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,092 Times in 2,325 Posts
For a cassette, probably the best way is to remove the cassette, take it apart and physically remove the old oil with a rag (old tee-shirts work well). One rag will work on dozens of cassettes. Dispose of the rag properly, of course, when done.

I clean chains in mineral spirits in a pop bottle. Feed the chain into the bottle, add mineral spirits, cap and shake. Pour the dirty mineral spirits into another bottle and allow any grit to settle to the bottom. Add more clean spirits to the bottle and chain and shake again (if needed). The mineral spirits will dissolve lots of lubricant before it has to be disposed of so hang onto it for a while and reuse it. I separate the dirt stuff from the relatively clean stuff too. That way the old dirty stuff will remove grit and the cleaner stuff will clean the lube off the chain.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Old 01-03-07, 02:35 PM
  #17  
the sun never sets on me
 
alumrock12's Avatar
 
Join Date: Oct 2006
Location: the bAy
Posts: 581

Bikes: 853 Hardtail

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
how do you guys dry your parts, not in the sun right? cuz that would promote rust?, just like with a paper towell, but how do you get inbetween the chain and stuff..

also, whats your guys' main oil/grease that you use almost all over the bike
alumrock12 is offline  
Old 01-03-07, 02:58 PM
  #18  
Faster but still slow
 
slowandsteady's Avatar
 
Join Date: Jun 2006
Location: Jersey
Posts: 5,978

Bikes: Trek 830 circa 1993 and a Fuji WSD Finest 1.0 2006

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
I have used simple green, WD-40, engine cleaner, and other solvents, but found that hot water and a very generous dose of palmolive dish soap works the best. Go figure. I also used the highly concentrated palmolive mixture on my car wheels and it worked better than the solvent wheel cleaner from the automotive section. That brake dust crud was stuck on my alloy wheels for years and I could never get it completely off with the so called wheel cleaners and even with brash brushes. But a little toothbrush and the palmolive did the trick.
slowandsteady is offline  
Old 01-03-07, 03:09 PM
  #19  
Senior Member
 
Join Date: Nov 2005
Posts: 103
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Gee3, I like your photo. I study Chinese myself and am used to seeing the chracters reversed from the way you have them, in other words "ming yun" rather than "yun ming". "Ming" is the part of fate you're born with and "yun" is the part after you're born that you have control over. Just curious.
BikeToWork is offline  
Old 01-03-07, 04:01 PM
  #20  
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,092 Times in 2,325 Posts
Originally Posted by alumrock12
how do you guys dry your parts, not in the sun right? cuz that would promote rust?, just like with a paper towell, but how do you get inbetween the chain and stuff..

also, whats your guys' main oil/grease that you use almost all over the bike
Mineral spirits doesn't contain water, or anything else which promotes rust. It evaportates on its own rapidly. Water will also evaporate on its own but you set up a nice little electrochemical reaction that results in rust while it's doing it. That's one of the reasons that I don't use Simple Green - water and iron aren't a good combination.

For chain lubricant, I use White Lightning. But I ride in an area that is usually very dry where WL shines. I've ridden elsewhere that was wetter and it's not as good a lube there.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Old 01-03-07, 04:15 PM
  #21  
Senior Moment Member
 
Gee3's Avatar
 
Join Date: Oct 2005
Location: Daly City, CA
Posts: 1,362

Bikes: Specialized Allez Elite Double & 2008 Look 555

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by BikeToWork
Gee3, I like your photo. I study Chinese myself and am used to seeing the chracters reversed from the way you have them, in other words "ming yun" rather than "yun ming". "Ming" is the part of fate you're born with and "yun" is the part after you're born that you have control over. Just curious.
Just pm'd you.

I had a friend's father write that out for me. I actually have those characters tattooed on my arm. It is to symbolize "Destiny", which is also my daughter's name. and from my research on the 'net that's also how i found them to be used. Hopefully it's right or I'm scarred for life. hehe!

Back to the OP's question... Do those quick removal links work for long term use? Or do you need to replace them once a year or something. I'd be worried about them breaking or falling off. Otherwise they sound good to use if they are reliable.

Gary
Gee3 is offline  
Old 01-03-07, 08:18 PM
  #22  
Senior Member
 
Join Date: Sep 2002
Location: Philadelphia suburb
Posts: 911
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Gee3
JDo those quick removal links work for long term use? Or do you need to replace them once a year or something. I'd be worried about them breaking or falling off. Otherwise they sound good to use if they are reliable.
Quite reliable. A new chain gets a new link.
lrzipris is offline  
Old 01-03-07, 09:30 PM
  #23  
Year-round cyclist
 
Join Date: Apr 2002
Location: Montréal (Québec)
Posts: 3,023
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
My preferred method? Leave it there! Once in a while, I remove gunk deposits off the derailleur pulleys with a small screwdriver. I typically re-lube my chain when it's about to start to squeek and it's ok. But we have lots of rain and some snow (not this year yet) to keep the drivetrain clean. And I have fenders that prevent road grime from flying onto the drivetrain.

But since you live in Las Vegas, you deal with more sand and much less rain than I do. I would therefore recommend that you use a "dry lube" to lubricate your drivetrain. Basically, compared to oil or "wet lube", a dry lubricant:
- is an equally effective lubricant for slow moving parts like a bicycle transmission;
- lasts almost as long, providing there is no rain;
- wears out very quickly in rain;
- is paraffine-based (or relatively similar to that), so it does not attract dirt.

The last point is important for you. Whereas sand will stick on an oiled chain like mad, it won't stick on a chain lubricated with dry lube.
Michel Gagnon is offline  
Old 01-03-07, 10:21 PM
  #24  
Bike Junkie
 
roccobike's Avatar
 
Join Date: Jun 2005
Location: South of Raleigh, North of New Hill, East of Harris Lake, NC
Posts: 9,622

Bikes: Specialized Tarmac, Specialized Roubaix, Giant OCR-C, Specialized Stumpjumper FSR, Stumpjumper Comp, 88 & 92Nishiki Ariel, 87 Centurion Ironman, 92 Paramount, 84 Nishiki Medalist

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 68 Post(s)
Likes: 0
Liked 37 Times in 27 Posts
Originally Posted by bkaapcke
The nice thing about simple green is that you can flush the stuff down the toilet when you're done. No nasty solvents to get rid of. Grocery and hardware stores have it. It also cleans brake crud off the rims well if you use it with scotch cloth. Also at the hardware store. bk
I use Simple Green too. It's bio-degradable so I pour it on my lawn. Bermuda grass seems to like it.
__________________
Roccobike BF Official Thread Terminator
roccobike is offline  
Old 01-03-07, 10:34 PM
  #25  
Solo Rider, always DFL
 
Join Date: Jun 2006
Location: Beacon, NY
Posts: 2,004

Bikes: Cannondale T800, Schwinn Voyageur

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
You can limit the amount getting soaked into the solvent by flossing the cassette (use the ratchet action to help you) while it's on the wheel with a strip of rag.

Go between each cog, and you will get most of you grit and gunk off.

Soaking in solvent will get the rest of the laid on oil off, but I've found that the rag dental floss method works really well, and is a lot quicker.
superslomo is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.