RD won't move
#1
Senior Member
Thread Starter
Join Date: Jun 2006
Posts: 876
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
RD won't move
A 80's Suntour RD doesn't seem to budge at all anymore (after riding through salty winter). The cable tension on the friction shifter seems fine, but it just won't move.
Is it possible some key part flew off? Should I oil the crap out of it, and press hard somewhere?
Is it possible some key part flew off? Should I oil the crap out of it, and press hard somewhere?
#2
Banned.
Join Date: Feb 2003
Location: Fort Wayne, Indiana
Posts: 4,761
Bikes: 84 Trek 660 Suntour Superbe; 87 Giant Rincon Shimano XT; 07 Mercian Vincitore Campy Veloce
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Without looking at the derailleur it would be impossible to find a "key" part that flew off.
To do this right you should remove the derailleur and clean with a water based water soluble degreaser and dry completly; next apply a dry lubricant like Finish Line Teflon Plus to the moving parts and pulleys. Then you need to oil the cable where it enters the housing.
To do this right you should remove the derailleur and clean with a water based water soluble degreaser and dry completly; next apply a dry lubricant like Finish Line Teflon Plus to the moving parts and pulleys. Then you need to oil the cable where it enters the housing.
#3
Senior Member
Join Date: May 2004
Location: Southern California
Posts: 2,191
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 119 Times
in
92 Posts
Originally Posted by godspiral
A 80's Suntour RD doesn't seem to budge at all anymore (after riding through salty winter). The cable tension on the friction shifter seems fine, but it just won't move.
Is it possible some key part flew off? Should I oil the crap out of it, and press hard somewhere?
Is it possible some key part flew off? Should I oil the crap out of it, and press hard somewhere?