Dia Compe hoods for Weinmann levers
#1
Senior Member
Thread Starter
Join Date: Jun 2007
Location: STL, MO
Posts: 164
Bikes: 05 Specialized Rockhopper, 70s Motobécane Grand Touring
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Dia Compe hoods for Weinmann levers
I'm trying to get a 70's Motobécane Grand Touring (photos) up and running (currently I've rehabbed the front wheel and done a bit of cleanup while I wait for parts/tools). Anyway, the brake hoods on this bike are pretty trashed so I want to replace them.
Will these brake hoods work? The bike has Weinmann levers and Weinmann 610/Vainqueur 999 brakes. I see the page says Weinmann 144, but I don't know if this is the level model. I can't really decide if I want the black ones or not (currently they are off white, but brown may look nice as well).
Thanks!
Will these brake hoods work? The bike has Weinmann levers and Weinmann 610/Vainqueur 999 brakes. I see the page says Weinmann 144, but I don't know if this is the level model. I can't really decide if I want the black ones or not (currently they are off white, but brown may look nice as well).
Thanks!
#2
Chrome Freak
Join Date: Dec 2005
Location: Kuna, ID
Posts: 3,208
Bikes: 71 Chrome Paramount P13-9, 73 Opaque Blue Paramount P15, 74 Blue Mink Raleigh Pro, 91 Waterford Paramount, Holland Titanium x2
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 26 Times
in
14 Posts
Yes, I have a set of them on my Paramount.
__________________
1971 Paramount P-13 Chrome
1973 Paramount P-15 Opaque Blue
1974 Raleigh Professional Blue Mink
1991 Waterford Paramount
Holland Titanium Dura Ace Group
Holland Titanium Ultegra Triple Group
1971 Paramount P-13 Chrome
1973 Paramount P-15 Opaque Blue
1974 Raleigh Professional Blue Mink
1991 Waterford Paramount
Holland Titanium Dura Ace Group
Holland Titanium Ultegra Triple Group
#5
Shin Banger
Join Date: Nov 2003
Location: Portland, Or
Posts: 164
Bikes: 1956 Steyr Touriste de Luxe, 1983 Torker 280x, 89 Merlin MTB, 1983 Peugeot UE-8, 59 Schwinn Balloon, Diamond Back Sorrento, 1987 Gitane Victoire, 1984 Schwinn World Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I used the dia compe gum hoods on my Weinmann levers. I did some slight trimming on the underside (seen in pic) to allow the lever to move freely without contacting the hood. I picked them up at the LBS for $7 I think. They fit really well. I couldnt locate the Weinmann hoods anywhere.
#6
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,764
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 1,293 Times
in
819 Posts
I have DiaCompe hoods over the Weinmann levers on my 1959 Capo. Fortunately, the 1960 came with genuine Weinmann hoods in remarkably good condition.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069