Smallest chainring for 157mm BCD?
#1
Senior Member
Thread Starter
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,054
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,802 Times
in
1,408 Posts
Smallest chainring for 157mm BCD?
I have a 3-arm crank (101mm BCD I believe). It has 2 steel chainrings that are riveted together and these chainrings are the common setup. Simplex made an adaptor so you can screw together 2, 6-hole patterned chainrings for "custom" setups (see picture below). This adapter is for a 157mm BCD chainring. I have seen 46 teeth chainrings that will fit on this but is there anything smaller? I've seen smaller TA 6-hole rings but I just found out they are a 152mm BCD.
#2
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,798
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,324 Times
in
836 Posts
I have aluminum 6-bolt 45, 46, 47, and 49T rings with 157mm BCDs. [I also have a 58T, for anyone who wants it for the $5 cost of shipping.] Looking at my 45T ring, I would guess 44T to be the minimum size, but I have never seen one.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069