Campy set up anyone?
#1
Senior Member
Thread Starter
Join Date: Oct 2007
Location: Chicago Illinois
Posts: 53
Bikes: Redline d660, '85 Schwinn Peloton full new ultegra, IRO robroy ss cross bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Campy set up anyone?
Ive been think about setting up a cross bike full campy and there are a few problems i have run into... campy has a 135 BCP and all (salsa and fsa) chain guides are set up for 130. Is there anybody who makes chainguards/guides that are compatable?
If anyone knows another problem i might run into with campy stuff please share
Thanks
If anyone knows another problem i might run into with campy stuff please share
Thanks
#4
Senior Member
Join Date: Jan 2006
Posts: 626
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Though it's been said that you can't, I was able to fit a generic 110bcd chainring on my Veloce UT Compact crank. Photographic proof here. I don't know if it applies to Centaur and up, though. It does mean you could use any 110 chainguard and ring on a Veloce UT Compact, which I've found to be a darn good crank.
#6
Don't smoke, Mike.
Join Date: Oct 2006
Location: Toronto
Posts: 3,295
Bikes: Devinci Tosca, IRO Rob Roy
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Though it's been said that you can't, I was able to fit a generic 110bcd chainring on my Veloce UT Compact crank. Photographic proof here. I don't know if it applies to Centaur and up, though. It does mean you could use any 110 chainguard and ring on a Veloce UT Compact, which I've found to be a darn good crank.
#7
Senior Member
Join Date: Jul 2005
Location: Cornhole, Iowa
Posts: 1,890
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
cyclocrossworld has campy chain guards 135mm bcd.
__________________
Get on a cross bike.... you'll like it ;)
Get on a cross bike.... you'll like it ;)
#8
Senior Member
Thread Starter
Join Date: Oct 2007
Location: Chicago Illinois
Posts: 53
Bikes: Redline d660, '85 Schwinn Peloton full new ultegra, IRO robroy ss cross bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i think i might have to run none campy...too bad
oh well. it is very true that campys compact stuff is 110 bcp but even then campy still has that one odd arm to keep them exclusive. so i guess non campy it will have to be. I have seen this company called stella azzurra that makes a carbon crankset that i have heard good things about but i am a little fearful of setting a carbon crankset on a cross bike. after all we all have heard of carbon wheels, bars etc breaking. some thoughts..
#9
Senior Member
Join Date: May 2005
Posts: 139
Bikes: Witt Custom / Cinelli SuperCorsa / Raleigh Cross, nothing original / Very old Bianchi Mtn Bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Back up... if you're talking about ring guards, are you planning to run one ring up front? If that's the case, then it doesn't matter what crank you have.
#10
Senior Member
Join Date: Jan 2006
Posts: 626
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
oh well. it is very true that campys compact stuff is 110 bcp but even then campy still has that one odd arm to keep them exclusive. so i guess non campy it will have to be. I have seen this company called stella azzurra that makes a carbon crankset that i have heard good things about but i am a little fearful of setting a carbon crankset on a cross bike. after all we all have heard of carbon wheels, bars etc breaking. some thoughts..
#11
Senior Member
Join Date: Dec 2005
Location: Charlottesville, Virginia
Posts: 1,990
Bikes: Dawes Kalahari, Puch Prima Super Sport, Graham Weigh 853
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I think the old, square taper Mirage, Veloce and Centaur cranks have a normal 110bcd. If you need an Italian alternative, may I suggest the Miche Grand Tour? Miche do a lot of rings in 110bcd that you may be able to order with it. This will probably be my crank of choice when the time finally comes
Otherwise, Cyclocross world has a 135bcd guard. Or you could run the inner two rings of a triple..
Otherwise, Cyclocross world has a 135bcd guard. Or you could run the inner two rings of a triple..