Cheapo Suzue Hub
#1
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Washington DC
Posts: 117
Bikes: Gitane Super Corsa, Shogun Ninja
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Cheapo Suzue Hub
Hey all, after doing some research on here I went ahead and bought a cheap Suzue flip/flop track hub, from what I read it seems like it will suit me fine with a repacking. Turns out it's even rougher than I thought! How much work should I do with this thing, I was going to repack it with Phil Wood grease, but should I also do the toothpaste trick and/or replace the bearings? Thanks!
#2
hello
Hey all, after doing some research on here I went ahead and bought a cheap Suzue flip/flop track hub, from what I read it seems like it will suit me fine with a repacking. Turns out it's even rougher than I thought! How much work should I do with this thing, I was going to repack it with Phil Wood grease, but should I also do the toothpaste trick and/or replace the bearings? Thanks!
#3
Senior Member
Join Date: Oct 2006
Posts: 443
Bikes: 86' Davidson Impulse, 83' Windsor Professional
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ive had luck rejuvenating nasty cups/cones with some 1000 and then 2000 grit sandpaper, and then some Mothers Polish. Plan on spending a few hours per hub to get it nice and smooth.
Just my .02
-Jerry
Just my .02
-Jerry