Out with the old and in with the new....
07-07-08, 11:26 PM
#1
Senior Member
Thread Starter
Out with the old and in with the new....
Looks like this is the year to update my fleet.
A couple of months back I got a Soma cyclocross frame to build up to replace my very faithful but old as dirt early 90's Canondale. It's one of those plodding along builds so it may be a few months yet before I fit it into the schedule.
But on other fronts things are prgressing a little faster.
A little while back I upgraded my old Norco single speed conversion with new long reach double pivot Tektro calipers. Then in a move to get rid of the drops I never used on the drop bars went over to a mustache bar. Life was good. I'm really likeing both the new hand positions as well as a whole new universe of braking power. No longer are the brakes just there for looks... Life was good.....
But along with these upgrades I found a shop that has Redline 925 SS's. Welllllll....... today I was coming back from leaving my non fender capable road bike (that was actually a bit too small a frame size for me anyway) with a local consignment sport shop and thought I'd just drop by the shop to check out that Redline again...... You probably can fill in the rest. OK, so the pictures below pretty much spill the beans.... Yes, I'm weak.....
Anyone want a good deal on a slightly used SS conversion? No, the Brooks stays here. It's just about broken in and it's everything that everyone has said about it. Likely it'll either end up on the 925 or on the Soma Double Cross build.
And the parts box upgrades have already started. Race Face 170 forged cranks with a 44T ring to replace the silver cranks and 42 that came with the bike. It was too spinny and the 44 is just perfect for me. Enough to speed along at around 18 to 20 mph but still climbs hills like a cat after a squirrel. And it helps for my tastes that it's all black rather than silver. Also some Cane Creek levers to replace the black and silver stamped levers. Not sure what else to upgrade. Maybe the shifters...
First the old and then the new.
A couple of months back I got a Soma cyclocross frame to build up to replace my very faithful but old as dirt early 90's Canondale. It's one of those plodding along builds so it may be a few months yet before I fit it into the schedule.
But on other fronts things are prgressing a little faster.
A little while back I upgraded my old Norco single speed conversion with new long reach double pivot Tektro calipers. Then in a move to get rid of the drops I never used on the drop bars went over to a mustache bar. Life was good. I'm really likeing both the new hand positions as well as a whole new universe of braking power. No longer are the brakes just there for looks... Life was good.....
But along with these upgrades I found a shop that has Redline 925 SS's. Welllllll....... today I was coming back from leaving my non fender capable road bike (that was actually a bit too small a frame size for me anyway) with a local consignment sport shop and thought I'd just drop by the shop to check out that Redline again...... You probably can fill in the rest. OK, so the pictures below pretty much spill the beans.... Yes, I'm weak.....
Anyone want a good deal on a slightly used SS conversion? No, the Brooks stays here. It's just about broken in and it's everything that everyone has said about it. Likely it'll either end up on the 925 or on the Soma Double Cross build.
And the parts box upgrades have already started. Race Face 170 forged cranks with a 44T ring to replace the silver cranks and 42 that came with the bike. It was too spinny and the 44 is just perfect for me. Enough to speed along at around 18 to 20 mph but still climbs hills like a cat after a squirrel. And it helps for my tastes that it's all black rather than silver. Also some Cane Creek levers to replace the black and silver stamped levers. Not sure what else to upgrade. Maybe the shifters...
First the old and then the new.
07-07-08, 11:46 PM
#2
just keep riding
Join Date: Feb 2005
Location: Milledgeville, Georgia
Posts: 13,560
Bikes: 2018 Black Mountain Cycles MCD,2017 Advocate Cycles Seldom Seen Drop Bar, 2017 Niner Jet 9 Alloy, 2015 Zukas custom road, 2003 KHS Milano Tandem, 1986 Nishiki Cadence rigid MTB, 1980ish Fuji S-12S
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 33 Times
in
22 Posts
Early 90's is old? 
07-08-08, 07:22 AM
#3
Senior Member
07-08-08, 07:53 AM
#4
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,793
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1390 Post(s)
Liked 1,322 Times
in
835 Posts
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
07-08-08, 12:31 PM
#5
Senior Member
Thread Starter
I know! With the mods I did to the Norco recently it was better than ever. But some small signs of rust taking hold got me worrying. Plus after 8 or 9 years of riding this bike I just wanted something new and shiney. Are we not all subject to the lure of Shiney Object Syndrome?
The big issue will be building myself up to letting go of the present fleet in favour of the new stuff. The Norco has carried my butt to work through many a season and still puts a real smile on my face. But I guess I'm just a weak willed bike **** that can't say no to a pretty new face. It's the curse of N+1 I tell you! ! ! !
Even worse will be parting with the Canondale. It's the bike that carried me through my first metric century and did many a pleasant cross town day ride to chalk up 60 to 70 kms at a time. It's also the one that faithfully toured my backside around the Loire valley of France and my father's home town of Dundee, Scotland a few months back.
I'm trying to come to terms with this parting by saying that the bikes will go to new owners and give them as many happy memories as they have for me. But it's not easy to let go.
Keep them all? No thanks, I'm getting tired of cleaning chains and wheel rims. The goal is to work the fleet down to 4 or 5 and hold it there. But it's almost like giving up one of your children!
The big issue will be building myself up to letting go of the present fleet in favour of the new stuff. The Norco has carried my butt to work through many a season and still puts a real smile on my face. But I guess I'm just a weak willed bike **** that can't say no to a pretty new face. It's the curse of N+1 I tell you! ! ! !
Even worse will be parting with the Canondale. It's the bike that carried me through my first metric century and did many a pleasant cross town day ride to chalk up 60 to 70 kms at a time. It's also the one that faithfully toured my backside around the Loire valley of France and my father's home town of Dundee, Scotland a few months back.
I'm trying to come to terms with this parting by saying that the bikes will go to new owners and give them as many happy memories as they have for me. But it's not easy to let go.
Keep them all? No thanks, I'm getting tired of cleaning chains and wheel rims. The goal is to work the fleet down to 4 or 5 and hold it there. But it's almost like giving up one of your children!
