ISO and For Trade thread parts 2 and 3.
#2601
What happened?
Join Date: Jun 2007
Location: Around here somewhere
Posts: 7,927
Bikes: 3 Rollfasts, 3 Schwinns, a Shelby and a Higgins Flightliner in a pear tree!
Mentioned: 57 Post(s)
Tagged: 1 Thread(s)
Quoted: 1835 Post(s)
Liked 292 Times
in
255 Posts
I have an entire vintage Sears generator light with a taillight. NEVER USED.
#2603
K2ProFlex baby!
Join Date: Feb 2007
Location: My response would have been something along the lines of: "Does your bike have computer controlled suspension? Then shut your piehole, this baby is from the future!"
Posts: 6,133
Bikes: to many to list
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Liked 56 Times
in
31 Posts
I have this aero bar, will trade for white cotton bar wrap, two rolls with end caps, Viva or Tressoplast, preferably Viva.
__________________
You see, their morals, their code...it's a bad joke, dropped at the first sign of trouble. They're only as good as the world allows them to be. I'll show you. When the chips are down, these...These "civilized" people...they'll eat each other. See, I'm not a monster. I'm just ahead of the curve
You see, their morals, their code...it's a bad joke, dropped at the first sign of trouble. They're only as good as the world allows them to be. I'll show you. When the chips are down, these...These "civilized" people...they'll eat each other. See, I'm not a monster. I'm just ahead of the curve
Last edited by ilikebikes; 12-21-09 at 05:56 PM.
#2604
Champion of the Low End
Looking for:
White cruiser/comfort saddle
White 1/2" pedals ACQUIRED
interesting upright handlebars that would fit an old Huffy (think European or Velo Orange style) ACQUIRED
White basket/handlebar bag/saddle bag/etc. - something subtle is preferred
26.4 tall seatpost, LaPrade-type or similar, in good shape
Someone to pay my mortgage payments and credit card bills
Have:
Black Bell comfort saddle SPOKEN FOR
New 'Fat Fanny' (Troxel-style) saddle SPOKEN FOR
Vintage Troxel saddle SPOKEN FOR
North Face branded cruiser saddle (sharp, but would expect logos to fade) SPOKEN FOR
50 ft roll gray Shimano SIS housing
new Bell 1/2" black plastic pedals
Suntour 7 front and rear derailleurs
new Shimano 6-speed SIS shifter (discontinued) + recent SIS rear derailleur = index your old road bike!
White cruiser/comfort saddle
White 1/2" pedals ACQUIRED
interesting upright handlebars that would fit an old Huffy (think European or Velo Orange style) ACQUIRED
White basket/handlebar bag/saddle bag/etc. - something subtle is preferred
26.4 tall seatpost, LaPrade-type or similar, in good shape
Someone to pay my mortgage payments and credit card bills
Have:
Black Bell comfort saddle SPOKEN FOR
New 'Fat Fanny' (Troxel-style) saddle SPOKEN FOR
Vintage Troxel saddle SPOKEN FOR
North Face branded cruiser saddle (sharp, but would expect logos to fade) SPOKEN FOR
50 ft roll gray Shimano SIS housing
new Bell 1/2" black plastic pedals
Suntour 7 front and rear derailleurs
new Shimano 6-speed SIS shifter (discontinued) + recent SIS rear derailleur = index your old road bike!
Last edited by Primitive Don; 01-25-10 at 09:44 PM. Reason: want items added
#2605
Senior Member
Join Date: Apr 2007
Location: Everett, WA
Posts: 420
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
anyone have an 8 speed campagnolo RD?
#2606
Senior Member
HAVE: Campagnolo pre-Record 100 mm skewer
NEED: Campagnolo anything 130 mm skewer
May have some other bits around too if you feel compensation is needed.
Cheers Lenton/Lorne
NEED: Campagnolo anything 130 mm skewer
May have some other bits around too if you feel compensation is needed.
Cheers Lenton/Lorne
#2608
Muscle bike design spec
Join Date: Oct 2004
Location: Sterling VA
Posts: 3,688
Bikes: 70 Atala Record Proffesional, 00 Lemond, 08 Kestrel Evoke, 96 Colnago Master Olympic, 01 Colnago Ovalmaster, 76 Raleigh Gran Sport, 03 Fuji World, 86 Paramount, 90 Miyata CF, 09 Ritchey Breakaway CX, Bianchi Trofeo, 12 OutRiderUSA HyperLite
Mentioned: 1 Post(s)
Tagged: 1 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Wanted to trade or buy:
WANT
Shifters for downtube braze-on . Preferably 7 speed accushift but can use friction.
Rear derailleur with adjustment screw for indexed shifting.
GOT
cassette - gone
threadless stem
28.6 clamp FD
braze-on FD
alloy drop bar
other - please ask
WANT
Shifters for downtube braze-on . Preferably 7 speed accushift but can use friction.
Rear derailleur with adjustment screw for indexed shifting.
GOT
cassette - gone
threadless stem
28.6 clamp FD
braze-on FD
alloy drop bar
other - please ask
__________________
Korval is Ships
See my Hyperlite 411 it's the photo model on OutRiderUSA web page
See my Hyperlite 411 it's the photo model on OutRiderUSA web page
Last edited by robtown; 12-30-09 at 07:11 PM.
#2609
Senior Member
wanted to buy, wanted to trade
Fist off: buy beg borrow or steal:
Fenders and mounting hardware (preferably black) for an old 3 speed triumph.
To trade: My Peugeot of one similar but BIGGER, in the 58cm range. Will swap just frame for frame or whole for whole in comperable shape. Will through in some money for PX or significantly nicer PRN.
PLEASE PM ME!
__________________
1980ish Raleigh Marathon (Vintage Steel)
2006 Trek 820 (Captain Amazing)
2010 Specialized Tricross (Back in Black)
2008 Specialized Roubaix
"I'm built like a marine mammal. I love the cold! "-Cosmoline
"MTBing is cheap compared to any motorsport I've done. It's very expensive compared to jogging."-ColinL
Rides:1980ish Raleigh Marathon (Vintage Steel)
2006 Trek 820 (Captain Amazing)
2010 Specialized Tricross (Back in Black)
2008 Specialized Roubaix
Last edited by mr,grumpy; 12-23-09 at 04:08 PM. Reason: messed up some stuff
#2610
Senior Member
Join Date: Jul 2009
Location: Toronto, Ontario
Posts: 481
Bikes: 1984 Nishiki Landau, 1991 Merlin Titanium, 199? Lotto MBK Team
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have:
Cilo Pro Frame:
- ST 59cm CTC
- TT 58.5cm CTC
- 1" Head Tube 180mm
- English Threaded Bottom Bracket Compatible
- Columbus Nebra Tubing (cyclex steel)
- Ritchey Drop Outs
Want:
- Similar quality frame sized 56-58
- English threaded
more photos available upon request, PM me
Cilo Pro Frame:
- ST 59cm CTC
- TT 58.5cm CTC
- 1" Head Tube 180mm
- English Threaded Bottom Bracket Compatible
- Columbus Nebra Tubing (cyclex steel)
- Ritchey Drop Outs
Want:
- Similar quality frame sized 56-58
- English threaded
more photos available upon request, PM me
#2611
Senior Member
Join Date: May 2009
Location: OKC, OK
Posts: 101
Bikes: 83 Trek 620
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Want: Suntour Cyclone GT Mk II rear derailleur model RD 3700 for my 83 Trek 620. I have the front derailleur. I'd also consider a different Suntour RD that would work for touring. I'm still running 6 and 7 speed cassettes on the rear but have a triple on the front.
Have: Some vintage stuff and new stuff. Vintage Silca floor pump, many dura ace and shimano 600 6 or 7 speed cogs. Some campy bar end plugs. DiaComple levers in black on a vintage drop bar. A cinelli threaded stem NIB. I can give details or pics of my stuff. Also cash money.
Thanks.
Have: Some vintage stuff and new stuff. Vintage Silca floor pump, many dura ace and shimano 600 6 or 7 speed cogs. Some campy bar end plugs. DiaComple levers in black on a vintage drop bar. A cinelli threaded stem NIB. I can give details or pics of my stuff. Also cash money.
Thanks.
#2612
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,580
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 591 Post(s)
Likes: 0
Liked 663 Times
in
312 Posts
WANT:
26.8mm Campag Record seatpost. Need not be perfect.
HAVE:
27.0mm Campag Record seatpost
26.8mm SR Laprade seatpost
27.2 Sugino seatpost
Campag Record LF hub laced to Fiamme red tubular rim. Old logo on rim
Campag Record SF hubset, 126mm
Campag Record LF hub laced to Ukai 700x25 clincher rim
Shimano STX headset
Various Campag BB
Suntour Superbe drive side crank with rings
Lot of other stuff...ask
26.8mm Campag Record seatpost. Need not be perfect.
HAVE:
27.0mm Campag Record seatpost
26.8mm SR Laprade seatpost
27.2 Sugino seatpost
Campag Record LF hub laced to Fiamme red tubular rim. Old logo on rim
Campag Record SF hubset, 126mm
Campag Record LF hub laced to Ukai 700x25 clincher rim
Shimano STX headset
Various Campag BB
Suntour Superbe drive side crank with rings
Lot of other stuff...ask
#2613
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
any particular model?
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#2616
Senior Member
Join Date: Dec 2008
Posts: 1,315
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
have a bit too small picchio special in almost perfect condition. will trade for equal quality and vintage in a 54cm. doesnt have to be a picchio, just something of equal quality. ps, the picchio is only a 52cm
#2617
Senior Member
Join Date: Oct 2006
Location: Puyallup Washington
Posts: 1,846
Bikes: Motobecane Mirage fixed gear, Nashbar Alpha Road 5000, Bianchi Grizzly, Coppi Fiorelli, , Schwinn Trike, , GT All Terra, Old Peugeot, Nishiki 3 speed, Bugatti, Cannondale Black Lightning, Dura All, Bianchi Touring, Bridgestone T700 & more
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
I would like to trade my Peugeot PX-10ish frame, fork and headset for something of similar quality but a bit smaller.
What I mean by PX-10ish is that the frame was modified and repainted at some point. It has had cable braze-ons added as well as downtube shifter bosses. The drive side rear dropout has not been messed with and so requires a rear derailleur made for an unthreaded Simplex dropout.
I will gladly include the headset but I'm keeping the rest of the components pictured. But I may be persuaded to throw in the cheapo seatpost too.
The paint is a bit worse for wear as are the decals. It chips easily and there are a few spots of minor corrosion that need some attention. The frame measured center to center is about 52cm for the seat tube and about 55cm for the top tube.
I would like to trade for a roadbike (or track) frame that is about 50cm (c-c) on the seat tube and more importantly no more then 52cm (c-c) on the top tube. So anywhere from 50-52cm would work...Paint condition does not worry me just as long as there is no excessive rust, dents or dings.
What I mean by PX-10ish is that the frame was modified and repainted at some point. It has had cable braze-ons added as well as downtube shifter bosses. The drive side rear dropout has not been messed with and so requires a rear derailleur made for an unthreaded Simplex dropout.
I will gladly include the headset but I'm keeping the rest of the components pictured. But I may be persuaded to throw in the cheapo seatpost too.
The paint is a bit worse for wear as are the decals. It chips easily and there are a few spots of minor corrosion that need some attention. The frame measured center to center is about 52cm for the seat tube and about 55cm for the top tube.
I would like to trade for a roadbike (or track) frame that is about 50cm (c-c) on the seat tube and more importantly no more then 52cm (c-c) on the top tube. So anywhere from 50-52cm would work...Paint condition does not worry me just as long as there is no excessive rust, dents or dings.
#2618
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,732
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,403 Times
in
1,204 Posts
ISO: Some sort of Suntour-compatible indexed thumb shifters for a flat handlebar project bike. 6 speed in back, 2 or three in front.
HAVE: Many parts, am sure we can work something out.
HAVE: Many parts, am sure we can work something out.
#2619
K2ProFlex baby!
Join Date: Feb 2007
Location: My response would have been something along the lines of: "Does your bike have computer controlled suspension? Then shut your piehole, this baby is from the future!"
Posts: 6,133
Bikes: to many to list
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Liked 56 Times
in
31 Posts
Have: Green Brooks Pro, copper rivets and rails, almost new.
Need: Brooks Swallow or Swift, black, brown, or honey.
Need: Brooks Swallow or Swift, black, brown, or honey.
__________________
You see, their morals, their code...it's a bad joke, dropped at the first sign of trouble. They're only as good as the world allows them to be. I'll show you. When the chips are down, these...These "civilized" people...they'll eat each other. See, I'm not a monster. I'm just ahead of the curve
You see, their morals, their code...it's a bad joke, dropped at the first sign of trouble. They're only as good as the world allows them to be. I'll show you. When the chips are down, these...These "civilized" people...they'll eat each other. See, I'm not a monster. I'm just ahead of the curve
Last edited by ilikebikes; 12-31-09 at 03:19 PM.
#2620
Senior Member
WANT: Campagnolo Aero Seatpost 27.2 - Silver in color - would like Record, but will consider others that have the same shape (I've seen Chorus posts that have the same shape at the top, others have some extra metal around the clamp bolt)
HAVE: Shimano 105 headset (used)
- Specialized Body Geometry Comp saddle, circa 1991 with cutout
- Selle San Marco saddle (not sure of model)
- Inner Chainrings - 3 Shimano rings (one is a biopace)
- Chrome fork (unicrown) threadless with headset + 100mm stem (all off a 2004 Bianchi Pista)
- Mavic CXP 22 rims (set, 32 hole, silver; used for a few years but in nice shape)
- Truvativ crankset (single ring -- also off the 2004 Pista)
I'd love to trade something a Campag seatpost, but if not I'm also just trying to clean out my spare parts box. I'll let most of the stuff I listed go for very reasonable prices. PM me if interested! Thanks.
HAVE: Shimano 105 headset (used)
- Specialized Body Geometry Comp saddle, circa 1991 with cutout
- Selle San Marco saddle (not sure of model)
- Inner Chainrings - 3 Shimano rings (one is a biopace)
- Chrome fork (unicrown) threadless with headset + 100mm stem (all off a 2004 Bianchi Pista)
- Mavic CXP 22 rims (set, 32 hole, silver; used for a few years but in nice shape)
- Truvativ crankset (single ring -- also off the 2004 Pista)
I'd love to trade something a Campag seatpost, but if not I'm also just trying to clean out my spare parts box. I'll let most of the stuff I listed go for very reasonable prices. PM me if interested! Thanks.
#2621
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
Want...
Skewers for 93' record hubs
NR or SR headset (british threaded)
Have:
triumph/victory cranks in excellent shape
Athena calipers - early 90s'ish
campy levers (I think athena) - early 90s'ish
Brooks b-17 that was swallowized...actually very good work on it...looks great. Does need to be tightened.
Black rolls saddle...excellent shape
Skewers for 93' record hubs
NR or SR headset (british threaded)
Have:
triumph/victory cranks in excellent shape
Athena calipers - early 90s'ish
campy levers (I think athena) - early 90s'ish
Brooks b-17 that was swallowized...actually very good work on it...looks great. Does need to be tightened.
Black rolls saddle...excellent shape
#2622
Senior Member
Join Date: Aug 2005
Location: ontario
Posts: 2,234
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have:
Hubs (all rears are for threaded freewheels); 36h rear Campagnolo Record HF, 32h rear Campagnolo Record LF. 36h Suzue front HF, 28h rear Dura Ace LF (never used), 28h rear Maillard team issue LF, 32h Formula flip flop black HF.
Cranks: 1st gen Dura ace 170mm, with replacement period style rings (53/42), Sugino Maxi 171mm, rather old but square taper, 52/48 rings.
Derailleurs: Ofmega master (front and rear), 2nd gen dura ace (front and rear, rear pivot strength not the greatest), crane rear derailleur, shimano 80s "Z" code front and rear, 2 campy front derailleurs (no idea what they are), 2 altus front derailleurs, shimano rx100 rear, deore LX long cage rear.
Other stuff: exage aero levers great hoods, right dura ace aero lever, mafac non aero drilled levers, 1st gen? dura ace non aero levers, dia compe non aero levers, shimano z series non aero levers, all kinds of 6sp freewheels (shimano, regina), all kinds of downtube shifters, ofmega pedals from the 80s, sach new success calipers, campy record 25mm seatpost, campy record italian bb, cinelli 1a 110mm length,
Wanted: working 8 (prefably) or 10 speed shimano STI shifters, 28 or 24 hole 700c clincher hoops, 32 hole rear hub for 8sp shimano cassette, or any already built 28 or 32 hole rear wheel with a cassette hub silver or black with machined sidewall, what else do you have?
Hubs (all rears are for threaded freewheels); 36h rear Campagnolo Record HF, 32h rear Campagnolo Record LF. 36h Suzue front HF, 28h rear Dura Ace LF (never used), 28h rear Maillard team issue LF, 32h Formula flip flop black HF.
Cranks: 1st gen Dura ace 170mm, with replacement period style rings (53/42), Sugino Maxi 171mm, rather old but square taper, 52/48 rings.
Derailleurs: Ofmega master (front and rear), 2nd gen dura ace (front and rear, rear pivot strength not the greatest), crane rear derailleur, shimano 80s "Z" code front and rear, 2 campy front derailleurs (no idea what they are), 2 altus front derailleurs, shimano rx100 rear, deore LX long cage rear.
Other stuff: exage aero levers great hoods, right dura ace aero lever, mafac non aero drilled levers, 1st gen? dura ace non aero levers, dia compe non aero levers, shimano z series non aero levers, all kinds of 6sp freewheels (shimano, regina), all kinds of downtube shifters, ofmega pedals from the 80s, sach new success calipers, campy record 25mm seatpost, campy record italian bb, cinelli 1a 110mm length,
Wanted: working 8 (prefably) or 10 speed shimano STI shifters, 28 or 24 hole 700c clincher hoops, 32 hole rear hub for 8sp shimano cassette, or any already built 28 or 32 hole rear wheel with a cassette hub silver or black with machined sidewall, what else do you have?
Last edited by divineAndbright; 12-28-09 at 09:30 PM.
#2623
Senior Member
Join Date: Sep 2008
Location: Collegeville, PA
Posts: 1,350
Bikes: Ruckelshaus Randonneur, Specialized Allez (early 90's, steel), Ruckelshaus Path Bomber currently being built
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I was going to post this as a thread, but I apparently don't have the ability to post my own thread in the for sale section.
If you've got a 1 bolt Campy Super Record seatpost with a stripped saddle clamp bolt, have I got a deal for you...I found a bolt that would work (and is, IMO, superior in that it is a 6mm allen bolt), it's an 8x50 1mm pitch thread black oxide bolt that takes a 6mm allen key; now, it's 5mm longer than the original bolt, but I'm of the "better too long than too short" school of thought. Anyway, if you need a replacement bolt for your Campy SR post, I now have 24 more than I need. I figure between the bolt and a couple of stainless washers that I'll throw in with it, and a bubble-pak envelope, and a stamp, this would be about $8 or so shipped in the US. I'd be OK with the following items in trade:
* New road bike brake cable sets
* New road bike SIS cable sets (need at least 1 set of grey)
* A set of aero-style road bike pedals that take toe clips, i.e. Shimano 600...with the toe clips (and straps would be nice). I unfortunately traded a pair over the summer and now need them for my daughter's bike.
* New set of 4 road brake pads (either Shimano slip-in replacements or complete)
* ???
* Vitus 979 decal set
* Brooks saddle wrench
If you've got a 1 bolt Campy Super Record seatpost with a stripped saddle clamp bolt, have I got a deal for you...I found a bolt that would work (and is, IMO, superior in that it is a 6mm allen bolt), it's an 8x50 1mm pitch thread black oxide bolt that takes a 6mm allen key; now, it's 5mm longer than the original bolt, but I'm of the "better too long than too short" school of thought. Anyway, if you need a replacement bolt for your Campy SR post, I now have 24 more than I need. I figure between the bolt and a couple of stainless washers that I'll throw in with it, and a bubble-pak envelope, and a stamp, this would be about $8 or so shipped in the US. I'd be OK with the following items in trade:
* New road bike brake cable sets
* New road bike SIS cable sets (need at least 1 set of grey)
* A set of aero-style road bike pedals that take toe clips, i.e. Shimano 600...with the toe clips (and straps would be nice). I unfortunately traded a pair over the summer and now need them for my daughter's bike.
* New set of 4 road brake pads (either Shimano slip-in replacements or complete)
* ???
* Vitus 979 decal set
* Brooks saddle wrench
#2624
N+1
Join Date: Sep 2004
Location: Ann Arbor, MI
Posts: 1,310
Bikes: A few
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Wanted:
Nitto M12 rack
TA Pro 5 vis crank arms or crankset, must be 175mm or longer and 9/16 x 20 pedal threading. I will also take another brands copy of the cranks as well (early Deore, Sugino PX, Nervar, Lambert, or Stronglight 49)
Thomson black 27.2x330mm seatpost-straight or setback
Tubus Tara low rider front rack
Nice LED dyno front light (Cyo, Edelux, supernova)
Time ATAC pedals
stuff I can't remember
Have:
Lots of stuff plus more not listed and access to more.
Nitto M12 rack
TA Pro 5 vis crank arms or crankset, must be 175mm or longer and 9/16 x 20 pedal threading. I will also take another brands copy of the cranks as well (early Deore, Sugino PX, Nervar, Lambert, or Stronglight 49)
Thomson black 27.2x330mm seatpost-straight or setback
Tubus Tara low rider front rack
Nice LED dyno front light (Cyo, Edelux, supernova)
Time ATAC pedals
stuff I can't remember
Have:
Lots of stuff plus more not listed and access to more.
Last edited by redxj; 12-30-09 at 12:46 AM.
#2625
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,049
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22596 Post(s)
Liked 8,925 Times
in
4,158 Posts
Want: used right side Dura-Ace 7400 (square taper) crank, 175mm, don't need rings just the spider.
Have: lots of stuff
Have: lots of stuff