Shimano SPD M505
06-12-04 | 02:14 AM
#3
DEADBEEF
Joined: Aug 2002
Posts: 12,234
Likes: 10
From: Catching his breath alongside a road near Seattle, WA USA
Bikes: 1999 K2 OzM, 2001 Aegis Aro Svelte
It's difficult and sometimes you may be able to twist them off by hand but I've usually resorted to backing off the tension and then prying the jaws open with a screwdriver.
__________________
1999 K2 OzM
2001 Aegis Aro Svelte
"Be liberal in what you accept, and conservative in what you send." -- Jon Postel, RFC1122
1999 K2 OzM
2001 Aegis Aro Svelte"Be liberal in what you accept, and conservative in what you send." -- Jon Postel, RFC1122
06-12-04 | 06:43 AM
#4
Go ahead...make my lunch.
Joined: Jun 2004
Posts: 59
Likes: 0
From: RI
Bikes: Lemond Reno, Fuji DelRey
Originally Posted by khuon
It's difficult and sometimes you may be able to twist them off by hand but I've usually resorted to backing off the tension and then prying the jaws open with a screwdriver.
You take a small flatblade screwdriver and wiggle it into one of the clamping jaws and slowly pry it out.
It helps to turn the screwdriver blade a bit as you pop it out...
06-12-04 | 10:55 AM
#5
2-Cyl, 1/2 HP @ 90 RPM
Joined: Oct 2003
Posts: 15,762
Likes: 5
From: NYC
Bikes: 04' Specialized Hardrock Sport, 03' Giant OCR2 (SOLD!), 04' Litespeed Firenze, 04' Giant OCR Touring, 07' Specialized Langster Comp
Originally Posted by jkittlesen
I've never had clipless pedals before, how do I release the clips to remove the temp. platforms that are installed?
