80s Peugeot Mystery BB
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Northern CA
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
80s Peugeot Mystery BB
Hey all, this is my first post on anything like this. I just got into riding fixed gears and am in the process of building (more like "completing") My first. From what I gathered It seems to be a 82-84(?) which also seems to be right around when Peugeot started making there switch from french to swiss to BSA.. Im curious if you guys could help me narrow down the model, year, and possibly set me off in the right direction for purchasing a new crank and bottom bracket.... This may not be too easy, because the bike was a single speed at purchase, and had no gears, derailers, and an aftermarket wheelset. I do have the original (I believe) cranks, stem, and brakes. Its a Non-Lugged, Carbolite tubing. What else do you need to know to tell me what I need to know?
Either way, I have a pic of what she looks like now, and can take more if you need them to help me identify this bad boy.
Thanks Guys!
Either way, I have a pic of what she looks like now, and can take more if you need them to help me identify this bad boy.
Thanks Guys!
#2
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,712
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5781 Post(s)
Liked 2,578 Times
in
1,429 Posts
Start with what you know. You always remove the left (adjustable) cup first. That;s helpful because ALL left cups are RH thread, so you can't go wrong unless you're dyslexic.
Once the left is off, you and measure it, or if that doesn't help look across the shell and see if you can tell the thread direction.
Once the left is off, you and measure it, or if that doesn't help look across the shell and see if you can tell the thread direction.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#3
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,837
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 805 Post(s)
Liked 706 Times
in
377 Posts
Start with what you know. You always remove the left (adjustable) cup first. That;s helpful because ALL left cups are RH thread, so you can't go wrong unless you're dyslexic.
Once the left is off, you and measure it, or if that doesn't help look across the shell and see if you can tell the thread direction.
Once the left is off, you and measure it, or if that doesn't help look across the shell and see if you can tell the thread direction.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#5
Guest
Join Date: Jul 2008
Location: Grid Reference, SK
Posts: 3,768
Bikes: I never learned to ride a bike. It is my deepest shame.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
If there are no lugs visible it may be a Canadian made peugeot, constructed with their Direct Brazing System (DBS). If this is true then it likely has a British threaded BB, but I am not sure. Very unlikely that it would be French.
#6
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Northern CA
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The dude on the bench still cant comprehend the difference between a schrader and a presta... But my funny lookin pal sure makes my whooped up bike look better.
#7
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Northern CA
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I cant find any external markings, so i guess its down to the lab to get them crank arms off and see what we can find out. this is a first for me, so... yeah. wish me luck, fellas.
#8
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Northern CA
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
First of all,
Thank you guys for all the responses and love toward the art of pedaling!
Now, after a few brews and a nice smoke break... I have successfully removed my first bottom bracket (Hooray!), without damaging anything or losing all the (loose) bearings. The (left) adjustable cup was indeed standard threading, as for the fixed/sprocket side, the threadings were reversed. Where do I take it from here Mr.FBinny?
Thank you guys for all the responses and love toward the art of pedaling!
Now, after a few brews and a nice smoke break... I have successfully removed my first bottom bracket (Hooray!), without damaging anything or losing all the (loose) bearings. The (left) adjustable cup was indeed standard threading, as for the fixed/sprocket side, the threadings were reversed. Where do I take it from here Mr.FBinny?
#12
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Maybe, maybe not. Swiss is 35 mm while English is 34.8 mm. I doubt your ruler can tell them apart. Take the frame to an LBS and have them try an English fixed cup in the threads. That will tell you immediately which it is.
Smoke break?
Smoke break?
#13
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Northern CA
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks dude, the guys at my bike shop are pretty good to me... Im just not sure how Ill make it across town now that I pulled my bike apart, haha.
Thanks for the heads up on how close the two truly are, Ill rely on the local talent to make sure Im not purchasing unnecessary parts.
Thanks for the heads up on how close the two truly are, Ill rely on the local talent to make sure Im not purchasing unnecessary parts.
#14
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Northern CA
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
As for an approximate year on the bike? Am I not gonna be able to narrow it down from my slightly educated guess of 82-84? Have my chances of finding my particular "matching" model been dramatically reduced due to a lack of original components?
Thread
Thread Starter
Forum
Replies
Last Post
jambon
Bicycle Mechanics
3
07-19-14 12:43 PM