Why is the chain rings always on the right?
#1
Senior Member
Thread Starter
Join Date: Nov 2010
Location: Durham, UK.
Posts: 239
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Why is the chain rings always on the right?
Why is the chain rings always on the right?
Silly question I know but it would be interesting to know if there is a specific reason.
Is it just tradition or some mechanical reason that the chain ring is always located on the right of any type of bicycle?
Silly question I know but it would be interesting to know if there is a specific reason.
Is it just tradition or some mechanical reason that the chain ring is always located on the right of any type of bicycle?
#2
Senior Member
Join Date: Apr 2010
Location: Warwick, UK
Posts: 1,049
Bikes: 2000-something 3 speed commuter, 1990-something Raleigh Scorpion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
There are several possible reasons. The most likely to me seems to be to do with mounting the bicycle, and when wheeling it on foot. The majority of people apparently mount their bike from the left side, and stand on the left when pushing it (something to do with right-handedness?). It therefore makes sense to put the transmission on the right, away from the rider's leg when standing beside the bike. Tandems of course usually have a chain on each side, and it's technically possible to set up a fixed gear with left-side-drive, though the pedal threads will be the wrong way round.
#3
Senior Member
Standardization. To put it on the left side, you'd have to come up with an entire new drivetrain's worth of parts. And the frame would need the dropouts switched. Disclaimer: A tandem puts the captain's chainring and timing chain on the left side.
#4
Banned.
Join Date: Dec 2005
Location: Upland Ca
Posts: 19,895
Bikes: Lemond Chambery/Cannondale R-900/Trek 8000 MTB/Burley Duet tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Mechanical sensibility. If you have chainring botls etc on the right side, the transmission turns in a direction that tightens the components. If it were on the left side, it would be going against the right tighty left loosey thingy. Stuff might come loose.
Like bar tape, you wrap it in a direction that tightens it when you grip it. Although the last shop to do our newest bike didn't. They suck!
Like bar tape, you wrap it in a direction that tightens it when you grip it. Although the last shop to do our newest bike didn't. They suck!
#6
Banned.
Join Date: Sep 2007
Location: Carlsbad, CA
Posts: 6,434
Bikes: '09 Felt F55, '84 Masi Cran Criterium, (2)'86 Schwinn Pelotons, '86 Look Equippe Hinault, '09 Globe Live 3 (dogtaxi), '94 Greg Lemond, '99 GT Pulse Kinesis
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 389 Post(s)
Liked 270 Times
in
153 Posts
For the same reason all motorcycle mufflers are mounted on the right side--a vast majority of crashes and tipovers occur on the left-hand side. The drivetrain (especially the delicate derailleurs) are protected by mounting them on the side which statistically sees the fewest crashes. I have three theories why we have this tendency:
~Our hearts (which are big, heavy organs) are located on our left, which makes us asymmetric bipedal primates more prone to tip that way.
~We have a Darwinian tendency to protect our sword (right) hand. I've even seen left-handed people who seem to do this when you're attacking them.
~(This one probably doesn't apply to you), because we drive on the correct side of the road, we tend to have better visibility when negotiating left-curves, than right-curves, so we naturally ride them more quickly and aggressively.
~Our hearts (which are big, heavy organs) are located on our left, which makes us asymmetric bipedal primates more prone to tip that way.
~We have a Darwinian tendency to protect our sword (right) hand. I've even seen left-handed people who seem to do this when you're attacking them.
~(This one probably doesn't apply to you), because we drive on the correct side of the road, we tend to have better visibility when negotiating left-curves, than right-curves, so we naturally ride them more quickly and aggressively.
#7
Dan J
Join Date: Jul 2006
Location: Iron Mountain, MI
Posts: 1,244
Bikes: 1974 Stella 10 speed, 2006 Trek Pilot 1.2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I vote for this answer.
#8
Senior Member
Join Date: Apr 2011
Location: NW Arkansas
Posts: 785
Bikes: Too many to count
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Because you carry your sword on your left side and you don't want it
in the chaining!
I have no idea what I am talking about! but it makes no sense any way!!
LOL...
The real reason is, the French invented the bicycle and they don't need
a reason for any thing, it is just French!
in the chaining!
I have no idea what I am talking about! but it makes no sense any way!!
LOL...
The real reason is, the French invented the bicycle and they don't need
a reason for any thing, it is just French!
#9
You gonna eat that?
Actually you're closer than you think. It's the same side people mount horses from.
#10
Senior Member
[QUOTE=Marauder9;12599314]Why is the chain rings always on the right?
QUOTE]
If the chain rings were on the left, there would be some unforgettable cross chaining.
QUOTE]
If the chain rings were on the left, there would be some unforgettable cross chaining.
__________________
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
#11
Banned
Where do they put the stoker's timing chainring?
all 3 chainrings can be on the Right, BUT..
derailleur bikes, the timing chain nowadays connects the captains crank.
to the left of stokers Crankset.. 3 on the right 1 on the left
the 40's~ 50s setups, there was often a really long final drive chain,
and the Captain had the chainrings on both sides of the spindle, then..
so in that situation, the stoker could be considered connected by 'their' timing chain..
current setups I'd say it was the Captains timing chain..
SO, The folly of universal generalizations, not Always
tandems are commonly having 2 chainrings on the left..
Last edited by fietsbob; 05-05-11 at 04:54 PM.
#12
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
That's what I think too. Whether you use a freewheel or a fixed cog, if you install it on the right side of the hub a more common right hand thread will self-tighten as you ride down the road.
#13
Banned.
Join Date: Dec 2005
Location: Upland Ca
Posts: 19,895
Bikes: Lemond Chambery/Cannondale R-900/Trek 8000 MTB/Burley Duet tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Yes, the freewheel would be the best example. Me and my little chainring bolts.
#14
Membership Not Required
Join Date: Jan 2005
Location: On the road-USA
Posts: 16,855
Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Likes: 0
Liked 15 Times
in
14 Posts
I saw an article from WorkCycles in the Netherlands...they built a left side chain ring fixed gear bike for someone so their dog wouldn't get tangled up while running along side.
Aaron
Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
#16
Peripheral Visionary
Join Date: Oct 2008
Location: Jax, FL
Posts: 1,157
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Well, if it were on the left, drive train would get a lot more dirty because the motor vehicles are always on the left. On an average, people in England clean their chains way more often.
#17
Sputnik - beep beep beep
Join Date: Oct 2008
Location: Louisville KY
Posts: 481
Bikes: '12 Jamis Coda Elite '09 Jamis Sputnik, '07 Jamis Eclipse, '13 Brompton M6R.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Well, you would be wrong, because the bearing cup on the drive side is a left-handed thread (lefty-tighty). Evidently the torque forces on the cup are opposite the direction of rotation, and would tend to loosen a right-hand (normal) threaded cup.
#18
Shop Wench
Join Date: Mar 2009
Location: California
Posts: 284
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Chainring bolts/nuts may experience a different rotation force. Witness lug nuts on certain older heavy duty pickup/van axles - the left rear wheel uses lugs with left hand thread.
#19
okay maybe not.
Join Date: Jun 2004
Location: waukesha, wi
Posts: 598
Bikes: oh a bunch.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
once I accidental put the drive train on the left side on my fixed gear. rode it for a block and the thing fell apart. still not sure why.
__________________
question everything.
question everything.
#20
CRIKEY!!!!!!!
Join Date: May 2005
Location: all the way down under
Posts: 4,276
Bikes: several
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1589 Post(s)
Liked 687 Times
in
365 Posts
It's on the right because that's the only way a balance is achieved between the coriolis force, precessionary reaction of the crank arms, and the electromagnetic induction caused by moving through the earth's magnetic field..... that's why all bikes in the southern hemisphere have the drivetrain on the left.
BTW, you should never lube your chain during a full moon because the tidal effect of the moon's gravity will prevent the lube from penetrating into the links where it's most needed.
BTW, you should never lube your chain during a full moon because the tidal effect of the moon's gravity will prevent the lube from penetrating into the links where it's most needed.
__________________
"Surely one can love his own country without becoming hopelessly lost in an all-consuming flame of narrow-minded nationalism" - Fred Birchmore
"Surely one can love his own country without becoming hopelessly lost in an all-consuming flame of narrow-minded nationalism" - Fred Birchmore
#23
Senior Member
Join Date: Apr 2011
Posts: 144
Bikes: Specialized Sirrus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Mechanical sensibility. If you have chainring botls etc on the right side, the transmission turns in a direction that tightens the components. If it were on the left side, it would be going against the right tighty left loosey thingy. Stuff might come loose.
Like bar tape, you wrap it in a direction that tightens it when you grip it. Although the last shop to do our newest bike didn't. They suck!
Like bar tape, you wrap it in a direction that tightens it when you grip it. Although the last shop to do our newest bike didn't. They suck!
#25
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,837
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 805 Post(s)
Liked 706 Times
in
377 Posts
Two wrongs don't make a right, but three lefts do!
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..