Lowrider rack for Raleigh Sojourn
#1
Member
Thread Starter
Join Date: Sep 2006
Location: Elk Grove, CA
Posts: 33
Bikes: Fuji Gran Fondo 2, Easy Racer recumbent, Raleigh Sojourn, Yuba Mundo, Kuota K-Factor
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Lowrider rack for Raleigh Sojourn
What lowrider racks fit a Raleigh Sojourn? I don't think my Blackburn rack is going to fit.
#2
Banned
A rack with a Hoop.. Bruce Gordon has the best.
Tubus has several ,
the Blackburn with a hoop have long been copied by other producers..
Is your rack made just to use on thru the fork boss forks ? IE Hoopless?
I dont see braze on in the middle of the fork.
https://www.raleighusa.com/bikes/steel-road/sojourn-12/
Bruces rack is 1 piece, P clips around the fork blade + the bolts thru the dropout eyelet
will be fine..
There are clamp on pieces Tubus offers to fit, for the purpose .
and the U bolt mounting system that comes with the Blackburn Hoop racks work well,
if properly installed..
(putting them together wrong is pretty common, too still seems to work.. )
Tubus has several ,
the Blackburn with a hoop have long been copied by other producers..
Is your rack made just to use on thru the fork boss forks ? IE Hoopless?
I dont see braze on in the middle of the fork.
https://www.raleighusa.com/bikes/steel-road/sojourn-12/
Bruces rack is 1 piece, P clips around the fork blade + the bolts thru the dropout eyelet
will be fine..
There are clamp on pieces Tubus offers to fit, for the purpose .
and the U bolt mounting system that comes with the Blackburn Hoop racks work well,
if properly installed..
(putting them together wrong is pretty common, too still seems to work.. )
Last edited by fietsbob; 08-08-11 at 01:41 PM.