Dualdrive II on 130mm frame
#1
Senior Member
Thread Starter
Join Date: Mar 2012
Posts: 104
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Dualdrive II on 130mm frame?
Can Dualdrive hub be slimmed down to fit 130mm spacing? I see there are two nuts on both sides that could be replaced with nuts 1/2 as thick perhaps?
#3
Banned
Go to the source :https://www.sram.com/service/sram/259
#4
Senior Member
Thread Starter
Join Date: Mar 2012
Posts: 104
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
No, aluminum. Anyway, I figured it out...after measuring the frame it's really 132 so all I need to do is find thinner M10x1 nuts or file 1.5mm off of each. I probably could stretch it but I do not want to put unnecessary stress on the welds.
Thanks for the link fietsbob.
Thanks for the link fietsbob.