What size is the Paramount and where is it located?
What size is the Paramount and where is it located?
-Profile T2-Wing (Aluminum version) 42cm width, good shape, some scuffs on the logos that don't go all the way to the metal.
-Dura Ace 7402 single-pivot brakes with barrel adjusters (but missing the plastic doo-hickey things), come with DA pads with TONs of material left
-Dura Ace 7401 Aero Brake levers. Minor scuffing on one side (can't remember which). No return spring on 7401's. Return spring came on the 7402 forward.
-Cheap carbon Langster fork (the one with the skulls) Comparible to a Specialized C2 fork (carbon legs, aluminum crown and steerer). 1 1/8: and tons of steertube (enough for a 56 with a short stack of spacers)
-Terry Fly Saddles (I have 2, one totally broken in, the other in a still-firm state). Both have Ti rails and both are comfy to my behind.
-11-34 LX MTB cassette (no integrated aluminum spider, just steel gears all the way to the freehub).
-Pedalsoft integrated areobar-stem setup. Super light, retailed for $379 when new. I have 3 sets,... only need 2. Extensions and armrests come on and off in <60 seconds so you can change up your setup quickly.
-Ritchey BioMax 42cm road bar. New take-off.
-MTB LX/XT Freehub (just the black clicky freehub cassette carrier, I don't need the hub)
-SRAM TT Carbon levers (not the red aluminum ones), not interested in CC, TRP, or Tektro TT levers
-Shimano MTB clipless pedals (Ritchey Comp's, XT/LX pedals are ok). I don't want SPD compatibles (like Crank Bros) Since I have 3 bikes that I use it on and only want to use one cleat system.
-25.4 Carbon Handlebar (uncut,... I intend on using it for actual MTB riding) Eason Monkeylite or the like.
-PM if you don't see anything on my want list. I have a ton of wants, but you don't have years to read. Just listed my top needs right now.
Strike like an eagle and sacrifice the dove.
Words and Stuff.
I need a few things to rebuild my beater.
A vintage areo brake lever.
SS crankset 165-170 lenth w/ chainring
English BB for said crankset
Holler if you have anything I could use!
HAVE: Nitto Pearl 12 (120mm) stem, very good condition
WANT: Nitto Pearl 10 or 9 (100mm or 90mm) stem
Hi all... I will basically repost this as I put it in the wrong spot....
Below is a list of things I am looking to trade for a wheelset, bullbars, flat bars, and/or a chain and freewheel...something for the drivetrain so I can get the bike rolling (spacer, freewheel, chain, cogs...) You guys would know more of what I need then I would.
Thanks and I hope to talk to you all soon!
***Bontrager Select 700×25c
Practically brand new, maybe 50 miles on them.
***K2 Road, with Gel padding and reflective rear panels.
Gently used, no rips/tears/stains.
***Deda Aeroblue Track/Tri Aero Bars.
Fits 1" stem. I bought these off Ebay to go a conversion but realized after I got them my stem was too large.
***Bontrager Select VR, 31.8mm.
These came off my Trek 1.2. No scratches, never dropped.
***Syntace Aero Bar Extensions
Used Alot, still have plenty of life left in them
Can route cable internally
***Shimano 2203 STI, 8 speed
Normal wear, about 500 total miles on them.
I also have some shifter cable housing, a few RC helicpoters...not the dinky ones but real 7-8 channel heli's, if you live around tampa I also have a 32" sony HDTV that I want to trade for a full fixie/ss
As mentioned above....Fixed Gear Parts....help me get rolling.
- Single Speed Freewheels
- Bull Bars/Flat Bars
Triathlon Bike / Tri Bike Parts
- CO2 Pumps
- Hydration Systems
What other bike parts do you have...I am open to ANYTHING....bike tools, repair stand, stuff to help me repair and repaint frames...
Want: XL Messenger Bag
Brooks Team Pro or B17 Special
Have: New In Box Sram Rival Standard Crankset 175mm w/ Bottom Bracket
Two Black Vintage Turbos
Most interested in a Messenger Bag. Thanks.
Dura-Ace Fixed Wheelset (one-side: fixed; Laced to Mavic CXP21 Rims; 32-hole; Surly 19 tooth cog; Tires NOT included )
Ultegra (Octalink; Road) Crankset
Campy Record (Vintage Road) Crankset
Campy (Vintage Nuovo Record?) Brakes
Campy (C-Record) rear derailleur
note: slight cosmetic damage (scrape); derailleur mechanical fine and works well
Campy (C-Record?) front derailleur
Campy (C-Record) DT friction shifters (these are great!)
Rolf Vector Sport Wheelset (WITH Michelin Pro3 Race tires)
Nitto (NJS) Track Stem
Suntour Superbe Pro (NJS) Track Pedals (not perfect; still spin well)
[more pics and info available just PM me]
*Paul Flatbed (or CETMA) Front Rack
*Light Road Wheelset (ideally- Neuvation R28SL2s or something comparable)
*Garmin 605 or 705
*Other interesting bits...
Last edited by midwestyelling; 09-05-09 at 04:28 PM. Reason: added my want of a garmin
Looking for a set of track pedals,
if you have small clips and straps I will also be interested.
single or double.
have some random parts,
chrome medium bad, gold/yellow and red.
steel 123 drops 39cm
steel jaguar stem 110
rb-21s 40cm or below, any color!
matching stem, preferably nitto peal 100 or below, any color
Let me know what you have! There are pics on my velospace
stock track bars from a bianchi pista 40cm wide with black origin 8 track grips
ea70 low rise bars 50cm wide w/ we the people grips
goldfinger lever 25.4 clamp w/ 22.2 shim
I'd like some salsa short n shallow bars or similar
170mm double crank
Someone must have a nice pair of GR-9's sitting around!!
53cm kilo TT stripped and repainted silver
175mm generic cranks
50cm kilo TT
Bianchi Castro Sold!
Last edited by BianchiDave; 09-19-09 at 06:34 AM. Reason: sold
I can send better up close and personal pictures, just ask.
Have: Nitto b123 track drops 39cm, wrapped in basically brand new black Bontrager tape.
Want: Nitto b125 track drops or syntace stratos bullhorns with ZERO drop as narrow as possible OR Nitto rb-018 bullhorns
36cm B123AA - White with Sparkle
Don't buy upgrades, ride upgrades
-Edouard Louis Joseph Merckx
Deda pista bars size 42 with black cork tape like new condition
Deda Zero100 3D forged stem 120 mm like new condition
Both are low mile take offs from jamis sonik
quality carbon stem
open for other offers(seats, chains, cogs ect)
have: 50cm kilo tt. Frame, fork, stock seatpost, stock, headset and seat collar. Good shape with some scratches from locking up and from attaching the bottle cage to the seat tube.
want: Frame such as Pake c'mute, surly crosscheck or similar, can make up the difference with parts if necessary.
Have: 38cm Nitto B123AA (slightly grooved from installation, mild scraping on the shoulders from bike falling) with 100mm Nitto Jaguar stem (steel).
MKS Custom Nuevos with MKS steel toe-clips (every-day wear, nothing wrong and spin smoother than anything else on the planet) with worn but great shape red Toshi doubles.
Want: Pretty newish 165mm Sugino Grand Mighty or 75 (silver or polished, no colors)
looking for a set of double straps and large/x-large clips. i have a ton of small parts.
BikesDirect enjoys driving away repeat customers! Support your local shop!
Tektro R310 standard reach(39mm-49mm) front brake.
Tektro RL726 alloy brake lever (ergo left)
Black FSA chainring 48t 130bcd slightly used.
Ritchey biomax ergo drops with tektro hoods and levers and Cinelli white cork bar tape.
Brake with extra long reach
Ergo right lever
Decent 17t cog
Alloy quill stem 1" (I think I'd have to double check)
I'd really like to fix this brake dilemma, as I ordered the brake kit from bike island and it won't fit and I really don't like that left side lever. I just hope it wasn't $25 wasted.