Any framebuilders?
#1
Spoked to Death
Thread Starter
Join Date: Jul 2004
Location: Boulder, CO
Posts: 1,335
Bikes: Salsa La Cruz w/ Alfine 8, Specialized Fuse Pro 27.5+, Surly 1x1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Any framebuilders?
Hi,
Anyone here build their own frames? I've welded on 'wacky' bikes before, but I've never made a 'serious' frame. I'm considering brazing together a lugged steel road/track style fixed gear frame (partly because it'll be easier, not so many brazons!), but I'm looking for geometry ideas.
What would be nice is if someone could recommend a lugset with good geometry for a road-oriented track frame, or suggest a 'classic' road/track frame who's geometry would be good to emulate. Pictures from the side work too, since you can plot over them in cad and make copycat frames.
My current hope is to do stainless lugs and painted steel tubes, and to build up a fork and stem to match. I can probably get away with using my ghetto jigs to align it all, and the brazing is not difficult. Really my biggest barrier is knowledge of proper bike angles, and good places to start looking at good frames.
peace,
sam
Anyone here build their own frames? I've welded on 'wacky' bikes before, but I've never made a 'serious' frame. I'm considering brazing together a lugged steel road/track style fixed gear frame (partly because it'll be easier, not so many brazons!), but I'm looking for geometry ideas.
What would be nice is if someone could recommend a lugset with good geometry for a road-oriented track frame, or suggest a 'classic' road/track frame who's geometry would be good to emulate. Pictures from the side work too, since you can plot over them in cad and make copycat frames.
My current hope is to do stainless lugs and painted steel tubes, and to build up a fork and stem to match. I can probably get away with using my ghetto jigs to align it all, and the brazing is not difficult. Really my biggest barrier is knowledge of proper bike angles, and good places to start looking at good frames.
peace,
sam
#3
mouth breather
Join Date: Oct 2004
Location: Ottawa, ON
Posts: 109
Bikes: Marinoni track
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've thought about this too...except I've been thinking about carbon tube into custom machined aluminum lugs.
Have a look at BikeCad
Have a look at BikeCad
#4
Employee
Join Date: May 2004
Location: Berkeley, CA, USA, Earth
Posts: 250
Bikes: Bridgestone 450, A Camera, 46x18 Fixed Gear, Homebrew Tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
A few links that might be helpful:
https://www.atnf.csiro.au/people/Suzy...beginning.html
https://web.archive.org/web/200110060...ey/tubing.html
https://www.phred.org/~josh/build/suppliers.html
ftp://draco.acs.uci.edu/pub/rec.bicycles/frame.build (more on the process of building)
I'd advise just looking at the lug sets at Ceeway, Henry James, etc. If you don't know what geometry you want, check out the geometries of well regarded frames.
https://www.atnf.csiro.au/people/Suzy...beginning.html
https://web.archive.org/web/200110060...ey/tubing.html
https://www.phred.org/~josh/build/suppliers.html
ftp://draco.acs.uci.edu/pub/rec.bicycles/frame.build (more on the process of building)
I'd advise just looking at the lug sets at Ceeway, Henry James, etc. If you don't know what geometry you want, check out the geometries of well regarded frames.
#5
Spoked to Death
Thread Starter
Join Date: Jul 2004
Location: Boulder, CO
Posts: 1,335
Bikes: Salsa La Cruz w/ Alfine 8, Specialized Fuse Pro 27.5+, Surly 1x1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Thanks for the suggestions. I'd seen a few of those links before, but the framebuilding class transcript was a new one to me!
Any suggestions for a well regarded frame for road use, but with a track bent? The surly steamroller seems like a popular one..
peace,
sam
Any suggestions for a well regarded frame for road use, but with a track bent? The surly steamroller seems like a popular one..
peace,
sam
#7
Senior Member
Join Date: Feb 2005
Posts: 718
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
hello. My name is Dave and I'm a framebuilder.
(everyone) Hello Dave.
I would say buy The Paterek Manual.
https://www.henryjames.com/patman.html
(everyone) Hello Dave.
I would say buy The Paterek Manual.
https://www.henryjames.com/patman.html
#8
Senior Member
Join Date: May 2004
Posts: 2,013
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I just got done reading https://www.atnf.csiro.au/people/Suzy...beginning.html
I don't think I have the patience it takes to build a frame. I think I'd rather order one. I can't see saving money at it, either, considering I don't have a torch, or any tools. Not to mention nobody to help me learn to braze. Somehow I think a bicycle frame isn't the best "first project". Its too bad really.
I don't think I have the patience it takes to build a frame. I think I'd rather order one. I can't see saving money at it, either, considering I don't have a torch, or any tools. Not to mention nobody to help me learn to braze. Somehow I think a bicycle frame isn't the best "first project". Its too bad really.
#9
Spoked to Death
Thread Starter
Join Date: Jul 2004
Location: Boulder, CO
Posts: 1,335
Bikes: Salsa La Cruz w/ Alfine 8, Specialized Fuse Pro 27.5+, Surly 1x1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
The paterak manual seems to be the way to go. I've been checking local libraries, and no one seems to carry it. At 75$, it would almost be as expensive as my materials! But I suppose if it is the one definative manual, it would be worth it... Anyone got a used copy they want to sell?
Thanks for the frameforum.net link, I'm surprised I hadn't found that yet!
I think a nice frame would be a pretty cheap thing for me to put together. I've got the time, and a few good tools. I'd have to build up my own jigs and whatnot, but I've done that before for other things. I think it would be a fun project.
peace,
sam
Thanks for the frameforum.net link, I'm surprised I hadn't found that yet!
I think a nice frame would be a pretty cheap thing for me to put together. I've got the time, and a few good tools. I'd have to build up my own jigs and whatnot, but I've done that before for other things. I think it would be a fun project.
peace,
sam
#10
Senior Member
Join Date: Mar 2005
Posts: 78
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by phidauex
At 75$, it would almost be as expensive as my materials! But I suppose if it is the one definative manual, it would be worth it... Anyone got a used copy they want to sell?
And materials for $75?? ZERO UNO is $70 for just one set, Columbus ZONA is maybe a little more, Thron a bit cheaper. Add a BB shell (~ $30, $40 for SS if you can find it), lugs ( ~$50 and up, stainless is more) and dropouts (Kirk Pacenti makes some nice ones for about $18 pair) and you're beyond there even before you get to filler rod, flux, oxy-acet, 80 grit. And i haven't even counted in a crown, blades, dropouts, steerer if you're making your own fork. It just keeps going up.
The Paterek book is a bargain at $75 if it keeps you from screwing up just one step that can cost you much more.
#11
Shiftless bum
As an aside, as the framebuilders are here. I have an old carbon arc welder with a brazing attachment. Although it looks cool, I have no documentation on the heat it puts out etc, so I was wondering if anyone knew anything about these welders for welding modern tubing (the manual lists bicycles as something you can weld but that's about it)
__________________
Originally Posted by operator
truneo that tuned park internal nipple wrench work ??
#12
Shiftless bum
Thanks for the response, Don
My carbon arc torch uses two carbon rods that, when put in proximity generate a flame. Apparently you can weld a lot of stuff but because you need a full helmet, not just goggles, it's hard to see your weld, so they can get ugly. I just wondered if someone had used it or no. I'll probably just chop a junker and see what happens.
My carbon arc torch uses two carbon rods that, when put in proximity generate a flame. Apparently you can weld a lot of stuff but because you need a full helmet, not just goggles, it's hard to see your weld, so they can get ugly. I just wondered if someone had used it or no. I'll probably just chop a junker and see what happens.
__________________
Originally Posted by operator
truneo that tuned park internal nipple wrench work ??
#13
Team Beer
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,339
Bikes: Too Many
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 159 Times
in
104 Posts
I have a noob question about frame building. I'm thinking of building a lugged frame but I lack a welder. To do the brazing (or soldering) would I need more than a handheld propane torch?
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#14
Spoked to Death
Thread Starter
Join Date: Jul 2004
Location: Boulder, CO
Posts: 1,335
Bikes: Salsa La Cruz w/ Alfine 8, Specialized Fuse Pro 27.5+, Surly 1x1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
To do brass and silver brazing you need a MAPP-air torch at the very least (and its usefulness is questionable) or preferably an oxy-actylene torch rig. Propane is good enough for soldering plumbing, but it isn't hot enough or controllable enough for brazing something the size of a frame.
Welding is something else entirely. If you are welding serious bike frames you'd want to use TIG welding, which is expensive to get into. I've MIG welded quite a bit on bikes, but always on beaters and tall bikes and stuff, which are usually made out of old heavy steel which MIGs just fine, the thin lightweight stuff a 'real' bike frame uses wouldn't hold up to the MIG...
A carbon arc welder would probably be good for making beaters and choppers and stuff, but again, I wouldn't expect you to have the control necessary to handle modern frame materials. Of course, there is only one way to find out. Auto darkening helmets start at around 50$, and improve your welds quite a bit, because you can position with the helmet down.
peace,
sam
Welding is something else entirely. If you are welding serious bike frames you'd want to use TIG welding, which is expensive to get into. I've MIG welded quite a bit on bikes, but always on beaters and tall bikes and stuff, which are usually made out of old heavy steel which MIGs just fine, the thin lightweight stuff a 'real' bike frame uses wouldn't hold up to the MIG...
A carbon arc welder would probably be good for making beaters and choppers and stuff, but again, I wouldn't expect you to have the control necessary to handle modern frame materials. Of course, there is only one way to find out. Auto darkening helmets start at around 50$, and improve your welds quite a bit, because you can position with the helmet down.
peace,
sam
#15
ready for the freakout
Join Date: Nov 2003
Location: the 757
Posts: 991
Bikes: Spicer track
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by phidauex
The paterak manual seems to be the way to go. I've been checking local libraries, and no one seems to carry it. At 75$, it would almost be as expensive as my materials! But I suppose if it is the one definative manual, it would be worth it... Anyone got a used copy they want to sell?
ebay, dammit!
#16
Team Beer
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,339
Bikes: Too Many
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 159 Times
in
104 Posts
Thanks for the info. I'll look into a torch. Yeah....more toys!
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#17
Shiftless bum
Originally Posted by Cynikal
Thanks for the info. I'll look into a torch. Yeah....more toys!
Ebay for torches or check in your local classifieds in the tools section. You can sometimes luck out. You may also check if a local community college etc. runs brazing classes. You could take a class and use the torch too. I'm considering doing that.
__________________
Originally Posted by operator
truneo that tuned park internal nipple wrench work ??
#18
BxTS
Join Date: Nov 2004
Location: Santa Rosa, CA
Posts: 280
Bikes: 1987 Centurion Dave Scott Ironman, 1988 Giant Kashmir, 1989 Trek 660
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Dear Framebuilders:
What is the word on the United Bicycle Institute's (Ashland, OR) Frame-building program? Here's the link, if you haven't heard of it.
What is the word on the United Bicycle Institute's (Ashland, OR) Frame-building program? Here's the link, if you haven't heard of it.
#19
BxTS
Join Date: Nov 2004
Location: Santa Rosa, CA
Posts: 280
Bikes: 1987 Centurion Dave Scott Ironman, 1988 Giant Kashmir, 1989 Trek 660
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
thank you.
on a side-note, referencing your comments on new colnagos:
good call, mr walker. who needs an ernesto when we have a don?
thank you for representing the supply-side here on b.f. .. you're a precious resource.
(and that's all the ass-kissing i can dole out today.)
on a side-note, referencing your comments on new colnagos:
good call, mr walker. who needs an ernesto when we have a don?
thank you for representing the supply-side here on b.f. .. you're a precious resource.
(and that's all the ass-kissing i can dole out today.)
#20
Senior Member
Join Date: Mar 2005
Posts: 78
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by jitensha_de_go!
If you could look at the 2 books side-by-side, the newest is so head and shoulders above that it's worth more than the extra $40 you'll pay. It also contains a full appendix with all his plans for fixtures that used to be available separately.