rotafix + red loctite + jb weld = ???
#1
Guest
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
rotafix + red loctite + jb weld = ???
Okay, here's what I've done:
I started with a cheapo 27" single speed wheel. I rotafixed my cog on there with red Loctite on the threads and JB Weld between the cog and the hub. I then put on a BB lockring with JB Weld between the lockring and the cog and on the threads. I then tightened the lockring on with a hammer and screwdriver until it wouldn't budge. I haven't used this wheel yet since I did this yesterday after work. I'd like to try it today but I'm a little nervous so I'm tapping the glimmering fountain of knowledge and experience that is this forum.
Here's what's bugging me:
First, using the rotafix method, I was never sure how tight I was supposed to get it. It felt pretty damn tight but I was afraid of stripping the hub's threads since I did the same thing in a roundabout way with a similar hub a couple months ago. Second, I put on too much Loctite which ended up running in between the JB Weld and the cog/hub. Would this weaken the bond between the JB Weld and the metal?
I might just be worrying too much. I am running a front brake. Every metal-to-metal surface has either JB Weld or Loctite on it and is pretty tight. Has anyone else done this method with success? Should I wait longer before I take it for a spin? What is the meaning of life? Have I told you lately that I love you?
Thanks.
I started with a cheapo 27" single speed wheel. I rotafixed my cog on there with red Loctite on the threads and JB Weld between the cog and the hub. I then put on a BB lockring with JB Weld between the lockring and the cog and on the threads. I then tightened the lockring on with a hammer and screwdriver until it wouldn't budge. I haven't used this wheel yet since I did this yesterday after work. I'd like to try it today but I'm a little nervous so I'm tapping the glimmering fountain of knowledge and experience that is this forum.
Here's what's bugging me:
First, using the rotafix method, I was never sure how tight I was supposed to get it. It felt pretty damn tight but I was afraid of stripping the hub's threads since I did the same thing in a roundabout way with a similar hub a couple months ago. Second, I put on too much Loctite which ended up running in between the JB Weld and the cog/hub. Would this weaken the bond between the JB Weld and the metal?
I might just be worrying too much. I am running a front brake. Every metal-to-metal surface has either JB Weld or Loctite on it and is pretty tight. Has anyone else done this method with success? Should I wait longer before I take it for a spin? What is the meaning of life? Have I told you lately that I love you?
Thanks.
#2
Senior Member
Join Date: Mar 2005
Posts: 140
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
That's what I don't like about the rotafixa method--it should hold against skipping and skidding assuming you get the cog tight enough, but there's no real way to know when it's tight enough.
#3
Spoked to Death
Join Date: Jul 2004
Location: Boulder, CO
Posts: 1,335
Bikes: Salsa La Cruz w/ Alfine 8, Specialized Fuse Pro 27.5+, Surly 1x1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I don't think that cog is ever leaving that hub. Just use a front brake in case it does, and have fun. People have been skidding for years on JB Welded hubs, and its not pretty, but it is secure if you do it right (and it sounds like you did).
peace,
sam
peace,
sam
#4
jack of one or two trades
Join Date: Jun 2005
Location: Suburbia, CT
Posts: 5,640
Bikes: Old-ass gearie hardtail MTB, fix-converted Centurion LeMans commuter, SS hardtail monster MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Are you sure you used enough product? Maybe some krazy glue, duct tape, and nails would make it more secure. Then that cog won't come off until armageddon.
#8
Senior Member
Join Date: Mar 2004
Posts: 2,615
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
You should probably round off the edges of the lock ring, as a further preventative to discourage removal- although if you ever DO decide to remove it, you should de-spoke your wheel first so you have absolutely no leverage.
Actually, you will find out in a hurry if your wheel will work. My only concern is that what you think might be tight using a hammer and screwdriver may not be so tight in the real world. That all said- I have a wheel with just loctite- no JB Weld and no lock ring- but best of all- no problems.
Actually, you will find out in a hurry if your wheel will work. My only concern is that what you think might be tight using a hammer and screwdriver may not be so tight in the real world. That all said- I have a wheel with just loctite- no JB Weld and no lock ring- but best of all- no problems.
#9
Senior Member
Join Date: Jun 2003
Posts: 997
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
"always a good idea to run a front brake on bumbike wheels. Better safe that not safe."
of course, the same could be argued for track-hub wheels.
of course, the same could be argued for track-hub wheels.
#10
Guest
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
Well, I totally lost my cog and lockring while trying my very first skid. Didn't react fast enough and plowed into a 'bent rider which caused me to endo into a hotdog stand, lacerating my chin and burning about 30% of my face. 10 stitches, a couple rolls of gauze/sterilizer, and a lot of appologies later I've decided to have a friend weld, real-weld, the cog onto that damn hub. By the way, I'm lying. I had a great ride. Except for nearly losing it in front of 2 hot runner-chicks when I tried to coast over a bump. But that happened only once.
By the way, what does it mean when a liar tells you he's lying?
By the way, what does it mean when a liar tells you he's lying?
Last edited by explody pup; 06-24-05 at 08:48 AM.
#11
Banned.
Join Date: Oct 2004
Posts: 4,416
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Here is my bumbike story:
So, to fix my rear hub, I soaked the cog and hub threads with off-brand blue loctite, and used the roatafixa method to get the cog as tight as I possibly could. I used all my 140 pounds to really crank that sucka on. Then I sqirted more loctite on, and spun a $.50 old bb lockring on, and hammered that thing on with a chisel and 5# sledge. It's held fine for almost 3 months now, and I've been skidding/skipping/doing hard backpedaling/resistance in that period. Works for me.
I also changed the cog once, and that thing was almost impossible to get off, but I did it.
So, to fix my rear hub, I soaked the cog and hub threads with off-brand blue loctite, and used the roatafixa method to get the cog as tight as I possibly could. I used all my 140 pounds to really crank that sucka on. Then I sqirted more loctite on, and spun a $.50 old bb lockring on, and hammered that thing on with a chisel and 5# sledge. It's held fine for almost 3 months now, and I've been skidding/skipping/doing hard backpedaling/resistance in that period. Works for me.
I also changed the cog once, and that thing was almost impossible to get off, but I did it.
#13
robots in disguise
Join Date: Dec 2004
Location: Baghdad-by-the-Bay
Posts: 305
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by explody pup
By the way, what does it mean when a liar tells you he's lying?