Should I be worried about these rims?
#1
Bike jocks ar still jocks
Thread Starter
Join Date: Sep 2005
Location: Portland, OR
Posts: 263
Bikes: 1970 peugeot PX-10 fixie, 2002 Team Fuji road bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Should I be worried about these rims?
Okay, I remember reading in a continental tire instruction thing that a certain kind of rim is dangerous and the tire can roll off if you have them at more than about 60 or 70psi. This was for the old type where the nipples came right up onto the rim, and the nipples would actually be touching the tube without rim tape. They are usually wider also. I can't really remember any more details than that but I think they were reffered to as well-base rims?
I think that these rims I just bidded on are those type so do I have anything to worry about using them with 700 X 23C tires at 120 psi?
https://cgi.ebay.com/ws/eBayISAPI.dll...tem=7197770486
PS: If I'm safe, they're mine!!
I think that these rims I just bidded on are those type so do I have anything to worry about using them with 700 X 23C tires at 120 psi?
https://cgi.ebay.com/ws/eBayISAPI.dll...tem=7197770486
PS: If I'm safe, they're mine!!
#2
Retrogrouch in Training
Join Date: Sep 2004
Location: Knee-deep in the day-to-day
Posts: 5,484
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Almost certainly the caution was against running the pressure too high on non-hook bead rims. Hook bead rims will have a lip at the edge of the rim wall that will keep a tire with a bead from easily slipping off the rim.
Given the age and the seller's response to a question, I'm guessing these are not hook bead rims.
Given the age and the seller's response to a question, I'm guessing these are not hook bead rims.
#3
Bike jocks ar still jocks
Thread Starter
Join Date: Sep 2005
Location: Portland, OR
Posts: 263
Bikes: 1970 peugeot PX-10 fixie, 2002 Team Fuji road bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks, I was also wondering if I have reason to retract my bid because he listed it as 700C. Don't the non hook-edge rims have a different letter after the 700? Or just no letter at all?
#4
Retrogrouch in Training
Join Date: Sep 2004
Location: Knee-deep in the day-to-day
Posts: 5,484
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
No, 700C is the standard wheel size these days.
It refers to the outside diameter of a wheel outfitted with a particular tire. A "700" rim with a size 700C tire would be 700mm across (pretty huge given that a 700C rim is only 622mm).
The tire sizes range from A (smallest) to D (largest). Thus a 700B wheel would actually have a larger rim but a smaller tire. Damn French.
Nowadays 700C refers to any wheel with a 622mm rim.
It refers to the outside diameter of a wheel outfitted with a particular tire. A "700" rim with a size 700C tire would be 700mm across (pretty huge given that a 700C rim is only 622mm).
The tire sizes range from A (smallest) to D (largest). Thus a 700B wheel would actually have a larger rim but a smaller tire. Damn French.
Nowadays 700C refers to any wheel with a 622mm rim.
Last edited by bostontrevor; 11-20-05 at 10:19 AM.