Brake (not "break") Squeal
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Posts: 79
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Brake (not "break") Squeal
I've done the obligatory search and found some info, but nothing that specifically sounds like my issue. I have also posted this in the bicycle mechanics forum here.
Anyway, I just got these new Alex DV 15 wheels for my fixed gear conversion. While taking it for a test ride last night, the brakes squealed something fierce! I also noticed a "feeling" when applying the brakes. It wasn't so much constant vibration, but more of like a "THUNK-THUNK-THUNK" would feel.
The brake pads came w/ the bike so I have no idea how old they are, but they stop me just fine. Also, before I got the new wheels, I used them on the old wheels and there was no squeal or vibration or anything.
Any thoughts? Could it be some sort of film or glazing or something on the new rims?
Thanks!
Anyway, I just got these new Alex DV 15 wheels for my fixed gear conversion. While taking it for a test ride last night, the brakes squealed something fierce! I also noticed a "feeling" when applying the brakes. It wasn't so much constant vibration, but more of like a "THUNK-THUNK-THUNK" would feel.
The brake pads came w/ the bike so I have no idea how old they are, but they stop me just fine. Also, before I got the new wheels, I used them on the old wheels and there was no squeal or vibration or anything.
Any thoughts? Could it be some sort of film or glazing or something on the new rims?
Thanks!
#2
Frankly, Mr. Shankly
Join Date: Oct 2002
Location: Chicago
Posts: 3,482
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Most likely it's your fork that's loose. Adjust your headset (tighten) and try riding it again. As for the squealing -- new brake pads or old brake pads? Old brake pads -- check them to see if they're done with, otherwise if they're new and the wheel is new, they're both wearing in somewhat and that might cause the squealing.
Also check for small rocks/glass in your brake pad.
Also check for small rocks/glass in your brake pad.
#3
redonkulous
Join Date: Nov 2005
Location: West Philly
Posts: 837
Bikes: 2001 GT GTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
YOu could also toe the brakes in to get rid of a squeal
(slightly bend the calipers so they hold the pads like this / !! \ with the "!!" being the rim.)
(slightly bend the calipers so they hold the pads like this / !! \ with the "!!" being the rim.)
#4
Senior Member
Join Date: Feb 2004
Location: San Francisco, CA
Posts: 452
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Rikardi151
YOu could also toe the brakes in to get rid of a squeal
(slightly bend the calipers so they hold the pads like this / !! \ with the "!!" being the rim.)
(slightly bend the calipers so they hold the pads like this / !! \ with the "!!" being the rim.)
#5
Vanned.
Join Date: Jul 2005
Posts: 1,244
Bikes: 2006 Motobecane Le Champ SL, 2006 Mercier Kilo TT, 2004 Gary Fisher Tassajara
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Give it a few weeks. My brakes squealed for a couple weeks while braking hard, when I got new cheap wheels. After about a month, it disappeared. Also make sure your calipers are tight, with no loose bearings.
#6
or tarckeemoon, depending
Join Date: Dec 2005
Location: the pesto of cities
Posts: 7,017
Bikes: Davidson Impulse, Merckx Titanium AX, Bruce Gordon Rock & Road, Cross Check custom build, On-One Il Pomino, Shawver Cycles cross, Zion 737, Mercian Vincitore, Brompton S1L, Charge Juicer
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Give your braking surface and brake pads a light sanding and see if the squeal goes away. The thunking might be the seam of your rim.
#7
Frankly, Mr. Shankly
Join Date: Oct 2002
Location: Chicago
Posts: 3,482
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by marqueemoon
Give your braking surface and brake pads a light sanding and see if the squeal goes away. The thunking might be the seam of your rim.
#8
Back to being a Clyde....
Join Date: Oct 2004
Location: Santa Clara
Posts: 1,544
Bikes: Giant OCR1(specialized carbon seatpost,Terry Fly sadle, Syntace C2): Leader TT frame, Easton EC70fork, Aerolite bars, nashbar bullhorn, Titan Wheels: Fuji Track Pro(2003)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Old(dry) brake shoes can make a hideous racket, try the toe in and light sanding.
#9
or tarckeemoon, depending
Join Date: Dec 2005
Location: the pesto of cities
Posts: 7,017
Bikes: Davidson Impulse, Merckx Titanium AX, Bruce Gordon Rock & Road, Cross Check custom build, On-One Il Pomino, Shawver Cycles cross, Zion 737, Mercian Vincitore, Brompton S1L, Charge Juicer
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by absntr
Ah yes! That too -- and actually more likely. But it never hurts to check that fork/headset (which I found out yesterday -- but not because of brakes).