Advertise on Bikeforums.net



User Tag List

Results 1 to 6 of 6
  1. #1
    I sing the body electric
    Join Date
    Apr 2005
    Location
    PHL
    My Bikes
    2006 CrossCheck, Fuji Track 2004
    Posts
    694
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Fuji Stock parts measurements

    Are the stock handlebars on the fuji track (at least in 04) 26mm for the clamp diameter? I just got a stem, which i also fear may not be 1" so the point may be moot (my dumb ass didn't ask about the shaft diameter), but the stock bars don't fit into the clamp (at least not the center of them). I've been running 123s but have 021s on order from the bikebiz. The stem i got was listed as 26mm for the clamp size, but if the stock bars are 26mm, the listing was wrong. I don't even think a rubber mallet would get those bars in and that's without even putting the bolt in...

  2. #2
    car dodger norskagent's Avatar
    Join Date
    Aug 2005
    Location
    garner/raleigh nc
    Posts
    3,272
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    my '05 is 25.4mm clamp, 1" dia. stem.
    I replaced the stock stem w/ a nitto technomic.

  3. #3
    I sing the body electric
    Join Date
    Apr 2005
    Location
    PHL
    My Bikes
    2006 CrossCheck, Fuji Track 2004
    Posts
    694
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by norskagent
    my '05 is 25.4mm clamp, 1" dia. stem.
    I replaced the stock stem w/ a nitto technomic.
    hmmm... yeah unless there are 25mm stems, the '04 ain't 25.4... I could see the bars being 26.4mm but i thought that size was reserved for screwy cinelli bars

    but i guess if the stem fits in my headset and is a 25.4 i cna still use it with my 123s... though if someone's interested, i'd look for the 123s and one or 2 stems up for trade in the trade thread

  4. #4
    i am sure that i hate you spud's Avatar
    Join Date
    Aug 2005
    Location
    703
    My Bikes
    'Cha-ruzu Fosuta Orusan Kein' Fuji Track (2005), Schwinn Tank MTB (?), Fuji Royale (1979)
    Posts
    3,230
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    aesthetically, the stem is the worst part on a stock Fuji Track (admittedly i dont know what the stock wheels look like and rock formula/deepVs myself). Go get something on ebay/CL/LBS that you know will fit your bars for sure.
    putting the pi back in pirate!
    Itís an upstanding member of the solar system
    Apply the laws of earth and make it a victim
    Of Proposition 187

  5. #5
    hateful little monkey jim-bob's Avatar
    Join Date
    May 2003
    Location
    oakland, ca
    Posts
    5,270
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by spud
    aesthetically, the stem is the worst part on a stock Fuji Track (admittedly i dont know what the stock wheels look like and rock formula/deepVs myself). Go get something on ebay/CL/LBS that you know will fit your bars for sure.
    I like that stem. Got a takeoff on my 3rensho.

  6. #6
    I sing the body electric
    Join Date
    Apr 2005
    Location
    PHL
    My Bikes
    2006 CrossCheck, Fuji Track 2004
    Posts
    694
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by spud
    aesthetically, the stem is the worst part on a stock Fuji Track (admittedly i dont know what the stock wheels look like and rock formula/deepVs myself). Go get something on ebay/CL/LBS that you know will fit your bars for sure.
    i tried getting something on ebay that i "know" will fit my bars. While i should have checked to make sure it would fit my bike, the auction definately said 26mm clamp diameter. And if the fuji stock bars (my only measurement device because my 021s haven't arrived yet and i run 123s -25.4-) are 26mm clamp, then i've been shafted a little.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •