cane creek volos vs. dura-ace
#1
poser/hipster/whatever
Thread Starter
Join Date: Apr 2005
Location: milwaukee, philly, and back, minneapolis in july
Posts: 994
Bikes: d/a allez -trek t1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
cane creek volos vs. dura-ace
first off i have to say that i am one hell of a fan of reduced spoke wheels.
i am looking at either the cane creek volos track wheels (tubular) or dura ace hubs, laced to 32 hole sun mistral tubulars with some sort of fancy spokes. the dura ace wheels would be a bit cheaper ( i work at a shop) but i am leaning more toward the volos. does anyone have any experience with them? i can't even find out whether they are sealed bearing without calling someone at cane creek. i don't know, i just want opinions. i think 32 spokes is pretty overkill for the track.
-jason
i am looking at either the cane creek volos track wheels (tubular) or dura ace hubs, laced to 32 hole sun mistral tubulars with some sort of fancy spokes. the dura ace wheels would be a bit cheaper ( i work at a shop) but i am leaning more toward the volos. does anyone have any experience with them? i can't even find out whether they are sealed bearing without calling someone at cane creek. i don't know, i just want opinions. i think 32 spokes is pretty overkill for the track.
-jason
#2
Dismount Run Remount etc.
Join Date: Apr 2005
Location: Some Latitude and Some Longitude
Posts: 2,235
Bikes: A couple customs and some beaters.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You'd better practice your proprietary spoke truing. If there's one thing I hate, it's having a special tool and skill to true a friggin wheel. Mavic, Cane Creek, American Classic, Shimano, Campagnolo and even Bontrager have this crap going on with some of their paired spoke wheelsets. It's quite a pain in the ass to go somewhere with an oddball wheel and not have the tool handy when a spoke needs a little retensioning.
#3
poser/hipster/whatever
Thread Starter
Join Date: Apr 2005
Location: milwaukee, philly, and back, minneapolis in july
Posts: 994
Bikes: d/a allez -trek t1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i'm not terribly worried about that. i work at a shop and like knowing/learning new things.
#4
Dismount Run Remount etc.
Join Date: Apr 2005
Location: Some Latitude and Some Longitude
Posts: 2,235
Bikes: A couple customs and some beaters.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by xthugmurderx
i'm not terribly worried about that. i work at a shop and like knowing/learning new things.
I too work at a shop, but I value things that I can count on to be
a. ****ing tough
b. serviceable when the interval comes up
There's a lot of hype in the bicycle industry and wheels are one of the worst next to frames. Just look at the flanges on the Volos. I bet the rim extrusion on that set is pretty flimsy, so I'm sure they don't recommend taking it on the road.
This Volos and other wheelsets just remind me of the headache that the American Classic 350 presented with its 350 gram (!!!) rim extrusion and its poorly designed hubs. It's all about 32/36H 3x for me, unless of course the manufacturer uses regular spokes, flanges, and nipples that can be trued at the inside of the rim and they give a lifetime guarantee and no rider-weight limit.
#5
poser/hipster/whatever
Thread Starter
Join Date: Apr 2005
Location: milwaukee, philly, and back, minneapolis in july
Posts: 994
Bikes: d/a allez -trek t1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
there will be no roadside maintenence. perhaps track apron maintenence, but that can be put off, if something happens that you'll need to be playing with your wheels, your day is pretty much over anyways. the cane creeks are radial in the front, radial on the non-drive rear and 1 cross on the drive side. definitely NOT road wheels.
-jason
-jason
#7
VOTE FOR KEN WIND
Join Date: Sep 2005
Location: U.S.A.
Posts: 984
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
There are actually a few glowing reviews of the Volos on here, and at least some of the reviewers rode them on the road. Ken Cox said they were great for climbing and strong if I remember right.
Cane Creek says on their website "...the Volos Track gives you raceability with extra durability for training and fixed gear road spinning."
It sounds to me like they recommend them for road use.
I've heard that since the nipples are at the hub and the spokes are straight pull (not bent at one end) they are less likely to break, but I don't know if that's true.
Cane Creek says on their website "...the Volos Track gives you raceability with extra durability for training and fixed gear road spinning."
It sounds to me like they recommend them for road use.
I've heard that since the nipples are at the hub and the spokes are straight pull (not bent at one end) they are less likely to break, but I don't know if that's true.
#8
poser/hipster/whatever
Thread Starter
Join Date: Apr 2005
Location: milwaukee, philly, and back, minneapolis in july
Posts: 994
Bikes: d/a allez -trek t1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by popluhv
does not compute
(quote) There are actually a few glowing reviews of the Volos on here, and at least some of the reviewers rode them on the road. Ken Cox said they were great for climbing and strong if I remember right.
perhaps, but i would not at all feel comfortable skidding/skipping on them. unless they come in different lacing patterns.
-jason
#9
Senior Member
Join Date: Oct 2005
Location: Salem, MA
Posts: 2,188
Bikes: Land Shark, Level Professional, Tsunami singlespeed, Giant Reign 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
the volos are designed with road training and track use in mind. the rear hub is fixed/ss flip flop.
the rear wheel can be trued with a 3/16" open end wrench, the front traditionally. from what i've gathered, they are plenty tough for daily street use, plenty stiff for track use and really quick to spin up. these use high tension sapim cx-ray bladed spokes. these can be found for ~$400 and weigh in at 1766g
on the other hand, you could build up:
36h dura ace high flange hubs - $300 - ~615g
lightweight 36h tubular NOS rims - $60 - ~600g
72 DT Aerolite spokes & Prolock nipples ; - $75 - ~330g
for $425 (+ building charge, if any) and ~1545 g.
The dura ace will likely spin up easier than the volos, while being just as stiff. however, this wheelset would not be suitable for daily street use.
the rear wheel can be trued with a 3/16" open end wrench, the front traditionally. from what i've gathered, they are plenty tough for daily street use, plenty stiff for track use and really quick to spin up. these use high tension sapim cx-ray bladed spokes. these can be found for ~$400 and weigh in at 1766g
on the other hand, you could build up:
36h dura ace high flange hubs - $300 - ~615g
lightweight 36h tubular NOS rims - $60 - ~600g
72 DT Aerolite spokes & Prolock nipples ; - $75 - ~330g
for $425 (+ building charge, if any) and ~1545 g.
The dura ace will likely spin up easier than the volos, while being just as stiff. however, this wheelset would not be suitable for daily street use.
#10
poser/hipster/whatever
Thread Starter
Join Date: Apr 2005
Location: milwaukee, philly, and back, minneapolis in july
Posts: 994
Bikes: d/a allez -trek t1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by sers
the volos are designed with road training and track use in mind. the rear hub is fixed/ss flip flop.
the rear wheel can be trued with a 3/16" open end wrench, the front traditionally. from what i've gathered, they are plenty tough for daily street use, plenty stiff for track use and really quick to spin up. these use high tension sapim cx-ray bladed spokes. these can be found for ~$400 and weigh in at 1766g
on the other hand, you could build up:
36h dura ace high flange hubs - $300 - ~615g
lightweight 36h tubular NOS rims - $60 - ~600g
72 DT Aerolite spokes & Prolock nipples ; - $75 - ~330g
for $425 (+ building charge, if any) and ~1545 g.
The dura ace will likely spin up easier than the volos, while being just as stiff. however, this wheelset would not be suitable for daily street use.
the rear wheel can be trued with a 3/16" open end wrench, the front traditionally. from what i've gathered, they are plenty tough for daily street use, plenty stiff for track use and really quick to spin up. these use high tension sapim cx-ray bladed spokes. these can be found for ~$400 and weigh in at 1766g
on the other hand, you could build up:
36h dura ace high flange hubs - $300 - ~615g
lightweight 36h tubular NOS rims - $60 - ~600g
72 DT Aerolite spokes & Prolock nipples ; - $75 - ~330g
for $425 (+ building charge, if any) and ~1545 g.
The dura ace will likely spin up easier than the volos, while being just as stiff. however, this wheelset would not be suitable for daily street use.
-jason
#11
Dismount Run Remount etc.
Join Date: Apr 2005
Location: Some Latitude and Some Longitude
Posts: 2,235
Bikes: A couple customs and some beaters.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by sers
The dura ace will likely spin up easier than the volos, while being just as stiff. however, this wheelset would not be suitable for daily street use.
#12
Senior Member
Join Date: Oct 2005
Location: Salem, MA
Posts: 2,188
Bikes: Land Shark, Level Professional, Tsunami singlespeed, Giant Reign 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by 12XU
Why would you run tubulars on the road anyway if you were looking for the ultimate in durability?
#13
it's your bicycle bells
Join Date: Nov 2004
Location: Brooklyn, NY
Posts: 378
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Oddly enough, the Cane Creek wheels really don't use that many proprietary parts. They're pretty bulletproof under normal use, though I did manage to destroy a rim in a pothole on the way home from the track a couple of months back...but since the rims on the Volos track set are just plain ol' Velocity Aeroheads, or the corresponding tubular (forget what it's called), replacements are pretty easy to find anywhere. The spokes seem to be Sapim CX, again, not that difficult to find, and Sapim sells a nice little plastic gripper for aero spokes which is easy enough to carry around in a pocket/seat bag/mess bag/whatever. You do need a wrench for the straight-pull spokes, but I haven't found it to be a big deal to carry that around.
#14
poser/hipster/whatever
Thread Starter
Join Date: Apr 2005
Location: milwaukee, philly, and back, minneapolis in july
Posts: 994
Bikes: d/a allez -trek t1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
ok, but how about the ride? i gather stiff, but do they spin as well dura-ace hubs? or campy/suntour/what have you? we'll see. i guess i'm just looking for a reason to NOT get those over dura-ace.
-jason
-jason
#15
King of the Hipsters
Join Date: Jan 2005
Location: Bend, Oregon
Posts: 2,128
Bikes: Realm Cycles Custom
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Yes, I ride the Volos track wheels.
They came with tools and everything a person might need, including a very high quality lock ring.
I weigh 235 or so with gear, and I ride aggressively.
These wheels have held up remarkably well and feel much lighter than their actual weight.
If I wanted to build up another fixie, cost no object, I might look at the Dura Ace wheels, simply because I have no experience with them, sort of a curiosity thing, but I know I'd get a good performing and good looking wheel from Cane Creek.
Actually, I don't think I'd go Dura Ace unless I did the whole bike with Dura Ace components.
I saw a nickel-plated lugged-steel fixie in Ashland with all Dura Ace components, and it looked beautiful.
In aviation we say, "if it looks good, it flies good."
That probably holds true for bicycles, too.
My bike flies good.
They came with tools and everything a person might need, including a very high quality lock ring.
I weigh 235 or so with gear, and I ride aggressively.
These wheels have held up remarkably well and feel much lighter than their actual weight.
If I wanted to build up another fixie, cost no object, I might look at the Dura Ace wheels, simply because I have no experience with them, sort of a curiosity thing, but I know I'd get a good performing and good looking wheel from Cane Creek.
Actually, I don't think I'd go Dura Ace unless I did the whole bike with Dura Ace components.
I saw a nickel-plated lugged-steel fixie in Ashland with all Dura Ace components, and it looked beautiful.
In aviation we say, "if it looks good, it flies good."
That probably holds true for bicycles, too.
My bike flies good.