Stuck chainring stack bolt?
#1
FG 48x17
Thread Starter
Join Date: Jan 2006
Location: El 'Burque, NM
Posts: 289
Bikes: Lemond Road, IRO Rob Roy, Rush Hour Fixie
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Stuck chainring stack bolt?
I am trying to center my chainring as described here under chain tension:
https://sheldonbrown.com/fixed.html
but one of the stack bolts is stuck. It just turns in the crank spider, and will not loosen. What sort of tool am I supposed to use to hold the back side of the bolt (with the two slots across from each other) still while I turn the front side (the 5mm hex)? Or is there some other trick to this?
Hopefully I'll have this damn bike together tomorrow... so close.
https://sheldonbrown.com/fixed.html
but one of the stack bolts is stuck. It just turns in the crank spider, and will not loosen. What sort of tool am I supposed to use to hold the back side of the bolt (with the two slots across from each other) still while I turn the front side (the 5mm hex)? Or is there some other trick to this?
Hopefully I'll have this damn bike together tomorrow... so close.
#4
Paste Taster
Join Date: May 2006
Location: Sacramento, CA
Posts: 4,392
Bikes: , Jury Bike, Moto Outcast 29, Spicer standard track frame and spicer custom steel sprint frame.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
chainring bolt spanner mmmmm